Shape memory behavior of polyethylene-foam-based nanocomposite for sustainable triboelectric nanogenerators
Source abstract
Abstract
Durable self-powering electronic devices need high-performance triboelectric nanogenerators (TENGs) with shape memory capabilities. A novel porous shape memory polymer nanocomposite that includes polyethylene foam (PEF) with switching molecules and graphitic carbon nitride nanosheets is designed to create a robust, high-performance TENG. This nanocomposite shows outstanding thermal-actuated shape recovery capabilities by heating at 70 °C. Although the TENG initially excels in output performance (1840 V voltage, 79.66 mW.cm ‐2 power density), prolonged harsh conditions cause nanocomposite deformation and performance decline. However, heating the nanocomposite to 70 °C fully restores the TENG’s original performance. Besides, the COMSOL Multiphysics simulation of TENG aligns with the experimental results. Furthermore, two TENG application scenarios are demonstrated: self-charging humidity sensing (where TENG’s output performance is humidity-sensitive and decreases as humidity rises) and powering electronic devices (where TENG turns on commercial LEDs, powers a smartwatch, and charges capacitors). Therefore, this TENG may open new possibilities for future self-powered electrical devices and sensors.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Conducting polymers and applications · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (97)
Show source-provided references
1. 3D stack integrated triboelectric nanogenerator for harvesting vibration energy10.1002/adfm.201304211 ↗
2. High-performance flexible piezoelectric-assisted triboelectric hybrid nanogenerator via polydimethylsiloxane-encapsulated nanoflower-like ZnO composite films for scavenging energy from daily human activities10.1021/acssuschemeng.8b00834 ↗
3. Dyeing-inspired sustainable and low-cost modified cellulose-based TENG for energy harvesting and sensing10.1021/acssuschemeng.1c08095 ↗
4. Super-durable, low-wear, and high-performance fur-brush triboelectric nanogenerator for wind and water energy harvesting for smart agriculture10.1002/aenm.202003066 ↗
5. Freestanding flag-type triboelectric nanogenerator for harvesting high-altitude wind energy from arbitrary directions10.1021/acsnano.5b07157 ↗
6. Waterproof fabric-based multifunctional triboelectric nanogenerator for universally harvesting energy from raindrops, wind, and human motions and as self-powered sensors10.1002/advs.201801883 ↗
7. 0.5 m triboelectric nanogenerator for efficient blue energy harvesting of all-sea areas10.1002/advs.202204407 ↗
8. Acoustic-electric conversion and triboelectric properties of nature-driven CF-CNT based triboelectric nanogenerator for mechanical and sound energy harvesting10.1016/j.nanoen.2023.108211 ↗
9. Nanoporous PVDF hollow fiber employed piezo–tribo nanogenerator for effective acoustic harvesting10.1021/acsami.1c04489 ↗
10. Triboelectrification
11. Self-boosted power generation of triboelectric nanogenerator with glass transition by friction heat10.1016/j.nanoen.2020.104840 ↗
12. Green flexible triboelectric nanogenerators based on edible proteins for electrophoretic deposition10.1002/aelm.202200839 ↗
13. Triboelectric nanogenerator: a foundation of the energy for the new era
14. A contextual framework development toward triboelectric nanogenerator commercialization10.1016/j.nanoen.2022.107572 ↗
15. 4D-printed self-recovered triboelectric nanogenerator for energy harvesting and self-powered sensor10.1016/j.nanoen.2021.105873 ↗
16. Self-healable triboelectric nanogenerators: Marriage between self-healing polymer chemistry and triboelectric devices10.1002/adfm.202208372 ↗
17. Self-restoring, waterproof, tunable microstructural shape memory triboelectric nanogenerator for self-powered water temperature sensor10.1016/j.nanoen.2019.04.089 ↗
18. Thermal-Triggered “On–Off” switchable triboelectric nanogenerator based on two-way shape memory polymer10.1002/adfm.202214001 ↗
19. Controllable physical synergized triboelectricity, shape memory, self-healing, and optical sensing with rollable form factor by Zn cluster10.1002/advs.202200441 ↗
20. Shape-memory polymers for biomedical applications10.1002/adfm.201909047 ↗
21. Shape memory polymers and their composites in biomedical applications10.1016/j.msec.2018.12.054 ↗
22. Automotive plastics and composites: materials and processing
23. A review of stimuli-responsive shape memory polymer composites10.1016/j.polymer.2013.02.023 ↗
24. Natural rubber-TiO2 nanocomposite film for triboelectric nanogenerator application10.3390/polym13132213 ↗
25. A novel MXene/Ecoflex nanocomposite-coated fabric as a highly negative and stable friction layer for high-output triboelectric nanogenerators10.1002/aenm.202002832 ↗
26. An eco-friendly porous nanocomposite fabric-based triboelectric nanogenerator for efficient energy harvesting and motion sensing10.1021/acsami.0c12709 ↗
27. Melamine-foam-based shape memory nanocomposite for a highly durable triboelectric nanogenerator
28. Improved triboelectric nanogenerator output performance through polymer nanocomposites filled with core–shell-structured particles10.1021/acsami.8b05966 ↗
29. Mesoporous highly-deformable composite polymer for a gapless triboelectric nanogenerator via a one-step metal oxidation process10.3390/mi9120656 ↗
30. High-performance flexible triboelectric nanogenerator based on porous aerogels and electrospun nanofibers for energy harvesting and sensitive self-powered sensing10.1016/j.nanoen.2018.03.050 ↗
31. Fabrication of triboelectric nanogenerators based on electrospun polyimide nanofibers membrane
32. Enhancing performance of triboelectric nanogenerator by filling high dielectric nanoparticles into sponge PDMS film10.1021/acsami.5b09907 ↗
33. A high performance triboelectric nanogenerator using porous polyimide aerogel film10.1038/s41598-018-38121-1 ↗
34. Melamine foam/reduced graphene oxide supported form-stable phase change materials with simultaneous shape memory property and light-to-thermal energy storage capability10.1016/j.cej.2019.122373 ↗
35. Melamine foam-supported form-stable phase change materials with simultaneous thermal energy storage and shape memory properties for thermal management of electronic devices10.1021/acsami.9b06198 ↗
36. A Triboelectric Nanogenerator Based on Sodium Chloride Powder for Self-Powered Humidity Sensor10.3390/nano11102657 ↗
37. Enhancement of self-powered humidity sensing of graphene oxide–based triboelectric nanogenerators by addition of graphene oxide nanoribbons10.1007/s00604-021-04921-y ↗
38. Cobalt-nanoporous carbon functionalized nanocomposite-based triboelectric nanogenerator for contactless and sustainable self-powered sensor systems10.1002/adfm.202105110 ↗
39. ZnAl–LDH-induced electroactive β-phase and controlled dielectrics of PVDF for a high-performance triboelectric nanogenerator for humidity and pressure sensing applications10.1039/D1TA02966E ↗
40. CNT-PDMS foams as self-powered humidity sensors based on triboelectric nanogenerators driven by finger tapping10.1038/s41598-023-27690-5 ↗
41. A facile method for scalable synthesis of ultrathin gC 3 N 4 nanosheets for efficient hydrogen production10.1039/C8TA06726K ↗
42. Sustainable and photoresponse triboelectric nanogenerators based on 2D-gC3N4 and agricultural wastes
43. A low-cost approach for measuring electrical load currents in triboelectric nanogenerators10.1515/ntrev-2017-0178 ↗
44. Shape-memory polymers and their composites: stimulus methods and applications
45. Multifunctional shape-memory polymers10.1002/adma.200904447 ↗
46. Smart polymer reactors and switchable catalysis
47. Quantitative analysis of copolymers and blends of polyvinyl acetate (PVAc) using Fourier transform infrared spectroscopy (FTIR) and elemental analysis (EA)
48. A novel FTIR-ATR spectroscopy based technique for the estimation of low-density polyethylene biodegradation10.1016/j.polymertesting.2012.07.015 ↗
49. Polyethylene characterization by FTIR10.1016/S0142-9418(01)00124-6 ↗
50. Preparation of paraffin@ poly (styrene-co-acrylic acid) phase change nanocapsules via combined miniemulsion/emulsion polymerization10.1166/jnn.2018.15199 ↗
51. Single-step route to diamond-nanotube composite10.1186/1556-276X-7-535 ↗
52. Magnetic Plasticine™: a versatile magnetorheological material
53. Analysis of Stress Relaxation in Bulk and Porous Ultra-High Molecular Weight Polyethylene (UHMWPE)10.3390/polym14245374 ↗
54. Au/Pd/gC 3 N 4 nanocomposites for photocatalytic degradation of tetracycline hydrochloride
55. Solid-state method synthesis of SnO2-decorated g-C3N4 nanocomposites with enhanced gas-sensing property to ethanol10.3390/ma10060604 ↗
56. Room-temperature synthesis of nanoporous 1D microrods of graphitic carbon nitride (g-C3N4) with highly enhanced photocatalytic activity and stability10.1038/srep31147 ↗
57. Nanonization of gC 3 N 4 with the assistance of activated carbon for improved visible light photocatalysis10.1039/C6RA10357J ↗
58. Magnetic graphitic carbon nitride nanoparticles covalently modified with an ethylenediamine for dispersive solid-phase extraction of lead (II) and cadmium (II) prior to their quantitation by FAAS10.1007/s00604-017-2273-5 ↗
59. Graphitic carbon nitride nanoplatelets incorporated titania based type-II heterostructure and its enhanced performance in photoelectrocatalytic water splitting10.1007/s42452-020-2190-9 ↗
60. Synthesis of Tri-S-Triazine Based g-C3N4 Photocatalyst for Cationic Rhodamine B Degradation under Visible Light
61. Cadmium sulfide and nickel synergetic co-catalysts supported on graphitic carbon nitride for visible-light-driven photocatalytic hydrogen evolution10.1038/srep22268 ↗
62. Self-supporting g-C3N4 nanosheets/Ag nanoparticles embedded onto polyester fabric as “Dip-Catalyst” for synergic 4-nitrophenol hydrogenation10.3390/catal11121533 ↗
63. Synthesis of g-C3N4/CeO2 nanocomposites with improved catalytic activity on the thermal decomposition of ammonium perchlorate
64. A review of the advances in composites/nanocomposites for triboelectric nanogenerators
65. Theoretical study of contact-mode triboelectric nanogenerators as an effective power source10.1039/c3ee42571a ↗
66. Recent advances in nanogenerator-driven self-powered implantable biomedical devices10.1002/aenm.201701210 ↗
67. High-performance transparent and flexible triboelectric nanogenerators based on PDMS-PTFE composite films10.1002/aelm.201800846 ↗
68. Structure–property relationship of polyetherimide based on aromatic dianhydride and long alkyl chain containing aromatic diamines
69. Structure and properties of new highly soluble aromatic poly (etherimide) s containing isopropylidene groups10.1038/pj.2013.49 ↗
70. Structuring and characterization of a novel highly microporous PEI/BMI semi-interpenetrating polymer network10.1016/j.polymer.2005.06.057 ↗
71. An eco-friendly triboelectric hybrid nanogenerators based on graphene oxide incorporated polycaprolactone fibers and cellulose paper10.1016/j.nanoen.2019.02.058 ↗
72. High-performance triboelectric nanogenerator based on MXene functionalized polyvinylidene fluoride composite nanofibers10.1016/j.nanoen.2020.105670 ↗
73. Crystallinity behavior of MDPE-clay nanocomposites fabricated using ball milling method
74. Graphene nanoplatelets-reinforced polyetherimide foams prepared by water vapor-induced phase separation10.3144/expresspolymlett.2015.40 ↗
75. Synthesis and characterization of microencapsulated paraffin with TiO 2 shell as thermal energy storage materials
76. A novel forced separation method for the preparation of paraffin with excellent phase changes10.1039/C9RA04722K ↗
77. High Anisotropic Thermal Conductivity, Long Durability Form-Stable Phase Change Composite Enhanced by a Carbon Fiber Network Structure10.3390/cryst11030230 ↗
78. Enhancement of triboelectric charge density by chemical functionalization10.1002/adfm.202004714 ↗
79. Triboelectric series of 2D layered materials10.1002/adma.201801210 ↗
80. Engineering materials at the nanoscale for triboelectric nanogenerators
81. Controllable triboelectric series using gradient positive and negative charge-confinement layer with different particle sizes of mesoporous carbon materials10.1002/smtd.202101545 ↗
82. Facile tailoring of contact layer characteristics of the triboelectric nanogenerator based on portable imprinting device10.3390/ma13040872 ↗
83. Comprehensive dependence of triboelectric nanogenerator on dielectric thickness and external impact for high electric outputs
84. Development of a triboelectric nanogenerator for joining of silver nanorods10.1002/aelm.202201348 ↗
85. A novel arch-shape nanogenerator based on piezoelectric and triboelectric mechanism for mechanical energy harvesting10.3390/nano5010036 ↗
86. Segmented swing-structured fur-based triboelectric nanogenerator for harvesting blue energy toward marine environmental applications10.1002/adfm.202106398 ↗
87. Green triboelectric nanogenerator based on waste polymers for electrophoretic deposition of titania nanoparticles10.1016/j.nanoen.2021.106581 ↗
88. High-power triboelectric nanogenerator prepared from electrospun mats with spongy parenchyma-like structure10.1016/j.nanoen.2017.02.010 ↗
89. High humidity-and contamination-resistant triboelectric nanogenerator with superhydrophobic interface10.1016/j.nanoen.2018.12.091 ↗
90. Enhancing output performances and output retention rates of triboelectric nanogenerators via a design of composite inner-layers with coupling effect and self-assembled outer-layers with superhydrophobicity10.1016/j.nanoen.2020.105074 ↗
91. Force-assembled triboelectric nanogenerator with high-humidity-resistant electricity generation using hierarchical surface morphology10.1016/j.nanoen.2015.12.021 ↗
92. Layer-by-layer assembly-induced triboelectric nanogenerators with high and stable electric outputs in humid environments10.1016/j.nanoen.2017.12.001 ↗
93. The electron transfer mechanism between metal and amorphous polymers in humidity environment for triboelectric nanogenerator10.1016/j.nanoen.2020.104476 ↗
94. Humidity-resistive triboelectric nanogenerator fabricated using metal organic framework composite10.1002/adfm.201807655 ↗
95. A fully packed water-proof, humidity resistant triboelectric nanogenerator for transmitting Morse code10.1016/j.nanoen.2019.04.004 ↗
96. Daily writing carbon ink: Novel application on humidity sensor with wide detection range, low detection limit and high detection resolution10.1016/j.snb.2021.129884 ↗
97. Electrical and optical properties of ZnO–WO 3 nanocomposite and its application as a solid-state humidity sensor10.1007/s12034-017-1373-5 ↗