Phase stability and transition of CrTaVW high-entropy alloy
Source abstract
Abstract
Refractory high-entropy alloys (RHEAs) are susceptible to phase transition at elevated temperatures, inducing deviation in the phase constitution from the intended design hence affecting the performance significantly. Accurate prediction of phase constitution and modulation of phase stability over a broad temperature range is crucial to develop RHEAs with superior properties. In this study, thermodynamic and first-principles calculations were integrated to investigate the temperature-dependent phase constitution in the CrTaVW alloy system. The effect of V and W atoms occupation sites on the stability of TaCr 2 Laves phase was evaluated. Both V or W atoms tend to occupy Cr sites in TaCr 2, and V exhibits stronger alloying ability than W due to the reduced electronic density at the Fermi level. Moreover, with increasing the doping content, the V and W exhibit opposite influencing trends on the formation and structural stability of TaCr 2 Laves phase. The Gibbs free energies of the Laves phase and solid solutions with variable compositions were obtained, enabling predictions for the critical temperatures of the phase transitions. The predicted behaviors of phase transitions were validated by experiments. This study provides guidance for modulating phase constitution and achieving desirable phase stability in RHEAs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
2. Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys10.1016/j.actamat.2014.01.029 ↗
3. Enhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys10.1016/j.intermet.2015.03.013 ↗
4. Superior High-temperature strength in a supersaturated refractory high-entropy alloy10.1002/adma.202102401 ↗
5. Negative mixing enthalpy solid solutions deliver high strength and ductility10.1038/s41586-023-06894-9 ↗
6. Sc doping induced the mechanical property improvement of dual-phase high-entropy alloy10.1016/j.msea.2022.144425 ↗
7. Achieving exceptional wear resistance in a compositionally complex alloy via tuning the interfacial structure and chemistry10.1016/j.actamat.2020.02.039 ↗
8. Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multi-principal metallic elements10.1007/s11661-006-0234-4 ↗
9. Lattice distortion in a strong and ductile refractory high-entropy alloy10.1016/j.actamat.2018.08.053 ↗
10. Severe local lattice distortion in Zr- and/or Hf-containing refractory multi-principal element alloys10.1016/j.actamat.2019.11.026 ↗
11. Composition design of high yield strength points in single‑phase Co-Cr-Fe-Ni-Mo multi-principal element alloys system based on electronegativity, thermodynamic calculations, and machine learning.10.1007/s42864-021-00129-y ↗
12. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
13. Phase stability of a light-weight AlNb2TiV refractory high-entropy alloy at high temperature10.1016/j.matlet.2022.132897 ↗
14. Phase evolution and mechanical properties of low-activation refractory high-entropy alloy Ti1.5ZrV0.5Ta0.510.1016/j.jmst.2023.03.048 ↗
15. Enhanced ductility in hot compression tests by tailoring microstructure in the refractory high-entropy alloys MoNbTaTiVxZr10.1016/j.ijrmhm.2023.106292 ↗
16. Development of wear-resistant dual-phase high-entropy alloys enhanced by C15 Laves phase10.1016/j.matchar.2023.112879 ↗
17. Microstructure and mechanical properties of AlNbTiVZr system refractory high entropy alloys10.1016/j.jallcom.2022.166767 ↗
18. Annealing-induced gradient nanostructured FeCrAlTiMo high-entropy alloy coatings with significantly enhanced wear resistance
19. Microstructure, hardness, oxidation and corrosion behavior of Cr(VNb)2 Laves containing CrNbTaVW RHEA in 3.5 wt% NaCl and 1 M H2SO4.10.1016/j.ijrmhm.2024.106661 ↗
20. Competition between solid solution and multi-component Laves phase in a dual-phase refractory high-entropy alloy CrHfNbTaTi10.1016/j.matdes.2023.111646 ↗
21. Effect of Si on the stability of NbCr2 Laves phase in Cr-Mo-Nb system
22. First-principles investigation of phase stability and elastic properties of Laves phase TaCr2 by ruthenium alloying10.1515/htmp-2022-0255 ↗
23. Overview: recent studies of machine learning in phase prediction of high entropy alloys10.1007/s42864-022-00175-0 ↗
24. CALPHAD-aided design for superior thermal stability and mechanical behavior in a TiZrHfNb refractory high-entropy alloy10.1016/j.actamat.2023.118728 ↗
25. A fast and robust method for predicting the phase stability of refractory complex concentrated alloys using pairwise mixing enthalpy10.1016/j.actamat.2022.118389 ↗
26. Prediction of phase stabilities of solid solutions for high entropy alloys10.1016/j.actamat.2023.119445 ↗
27. First-principles prediction of high-entropy-alloy stability10.1038/s41524-017-0049-4 ↗
28. Phase stability of TiAl-based BCC high entropy alloys10.1016/j.intermet.2023.107893 ↗
29. Design principles of low-activation high entropy alloys10.1016/j.jallcom.2022.164526 ↗
30. The effect of Ti on the sintering and mechanical properties of refractory high-entropy alloy TixWTaVCr fabricated via spark plasma sintering for fusion plasma-facing materials10.1016/j.matchemphys.2017.06.054 ↗
31. A novel refractory WMoVCrTa high-entropy alloy possessing fine combination of compressive stress-strain and high hardness properties10.1016/j.apt.2020.10.008 ↗
32. A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: microstructural evolution and mechanical properties10.1016/j.jallcom.2018.11.318 ↗
33. Optimization of conflicting properties via engineering compositional complexity in refractory high entropy alloys
34. A new thermodynamic parameter to predict formation of solid solution or intermetallic phases in high entropy alloys10.1016/j.jallcom.2015.10.279 ↗
35. First-principles calculations of the stability and hydrogen storage behavior of C14 Laves phase compound TiCrMn10.1016/j.solidstatesciences.2014.03.007 ↗