Research on the laser quenching performance of Ti6Al4V-7.3 %Cu alloys fabricated by wire-powder collaborative arc additive manufacturing
Source abstract
Abstract
In this work, a new arc wire powder synergistic additive manufacturing method was used to prepare Ti6Al4V-7.3 %Cu alloys. This method overcomes the inherent large columnar grain defects in additive manufacturing and the segregation phenomenon of titanium alloys. Three laser quenching processes were also used to surface-treat the Ti6Al4V-7.3 %Cu alloys, and the hardness, microstructure and corrosion properties were studied. The results showed that laser quenching can effectively refine the grains and improve the strength and corrosion resistance. A β to α phase transition occurred, and Ti 2 Cu was formed. When the β phase is transformed into the α phase, there is an obvious Burgers orientation relationship between the two phases, and the orientation of the α phase in the quenched layer is more concentrated in the build direction (BD). With increasing laser quenching power, the Ti 2 Cu content in the alloy first increased and then decreased. When the quenching power was 690 W, the performance of the alloy was the best. Compared with those of the as-fabricated sample, the hardness increased by 150 HV, the grain size decreased from 10 µm to 1 µm, and the corrosion potential (E corr) increased by 0.195 V. α-Ti + Ti 2 Cu exhibited better corrosion resistance than β-Ti + Ti 2Cu.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Application and features of titanium for the aerospace industry
2. An overview on the use of titanium in the aerospace industry10.1016/0921-5093(96)10233-1 ↗
3. On the characteristics of titanium alloys for the aircraft applications10.1016/j.matpr.2017.07.249 ↗
4. Additive manufacturing of titanium alloy for aircraft components10.1016/j.procir.2015.08.061 ↗
5. Additive manufacturing of titanium-based alloys- A review of methods, properties, challenges, and prospects10.1016/j.heliyon.2022.e09041 ↗
6. Titanium alloys for biomedical applications10.1016/j.msec.2005.08.032 ↗
7. Ti based biomaterials, the ultimate choice for orthopaedic implants - A review10.1016/j.pmatsci.2008.06.004 ↗
8. Microstructure, corrosion and tribological and antibacterial properties of Ti-Cu coated stainless steel10.1016/j.jmbbm.2015.06.004 ↗
9. Grindability of cast Ti-Cu alloys10.1016/S0109-5641(02)00080-5 ↗
10. Wear resistance of experimental Ti-Cu alloys10.1016/S0142-9612(03)00157-1 ↗
11. The grindability and wear of Ti-Cu alloys for dental applications10.1007/s11837-004-0145-z ↗
12. Microstructural, electrochemical and tribo-electrochemical characterisation of titanium-copper biomedical alloys10.1016/j.corsci.2016.02.014 ↗
13. Optimization of mechanical properties, biocorrosion properties and antibacterial properties of as-cast Ti-Cu alloys10.1088/1748-6041/11/6/065001 ↗
14. State of the art in beta titanium alloys for airframe applications10.1007/s11837-015-1442-4 ↗
15. A comparative study of the mechanical properties of high-strength β-titanium alloys10.1016/j.jallcom.2007.03.070 ↗
16. Microstructure and mechanical properties of composite strengthened high-chromium cast iron by laser quenching and laser shock peening10.1016/j.jmrt.2022.08.148 ↗
17. Effects of laser quenching on impact toughness and fracture morphologies of 40CrNiMo high strength steel10.1007/s11665-014-1164-8 ↗
18. Microstructure modification and improving corrosion resistance of laser surface quenched nickel–aluminum bronze alloy10.1016/j.corsci.2020.108744 ↗
19. Optimization of mechanical property, antibacterial property and corrosion resistance of Ti-Cu alloy for dental implant10.1016/j.jmst.2019.03.044 ↗
20. In situ wire + powder synchronous arc additive manufacturing of Ti–Cu alloys
21. Additive manufacturing of ultrafine-grained high-strength titanium alloys10.1038/s41586-019-1783-1 ↗
22. Microstructure and Mechanical Properties of Ti-35Nb-2Ta-3Zr Alloy by Laser Quenching10.3389/fmats.2019.00318 ↗
23. Recrystallization behavior of left brace 110 right brace 112 direction aluminium single crystals after rolling and plane-stration deformation10.1179/030634581790426958 ↗
24. Grain refining of Ti-6Al-4V alloy fabricated by laser and wire additive manufacturing assisted with ultrasonic vibration10.1016/j.ultsonch.2021.105472 ↗
25. The role of Cu-based intermetallics on the pitting corrosion behavior of Sn-Cu, Ti-Cu and Al-Cu alloys10.1016/j.electacta.2012.05.106 ↗
26. Passive film on orthopaedic TiAlV alloy formed in physiological solution investigated by X-ray photoelectron spectroscopy10.1016/S0142-9612(00)00145-9 ↗
27. Biological corrosion behaviour and antibacterial properties of Ti-Cu alloy with different Ti2Cu morphologies for dental applications10.1016/j.matdes.2022.110540 ↗