Mechanistic investigation of ammonia adsorption and reforming over Ni, Ru loaded catalysts toward green H2 production of marine engines: DFT calculation and experimental evaluation
Source abstract
Abstract
Highly active catalysts suitable for ammonia reforming reactions have been comprehensively investigated by density functional theory (DFT) calculations and experimental tests. Non-precious metal Ni, precious metal Ru and Ru-Ni composite metal are selected as catalytic activity surfaces, and a series of three-dimensional metal-packed catalyst models are constructed parallelly. Then, to elucidate the rate-determining step of reforming reaction, in-depth analysis of microscopic reaction mechanisms for amino groups (including H and NH x, x=0–3) adsorption, dissociation, recombination and desorption are carried out by simulation parameters and experimental data. The results indicate that NH 3 exhibits highly stable adsorption configurations (Bridge site) on both Ni, Ru-based catalyst surfaces, with the adsorption position having a relatively minor effect on adsorption energy. It is worth noting that Ni-based catalyst exhibits better adsorption behaviors towards NH 3 compared to Ru. Whereas, during stepwise dehydrogenation of NH 3 and subsequent N 2 and H 2 recombination and desorption processes, the reaction energy barriers confirm experimental observations of higher activity displayed by Ru-based catalyst in low-temperature range of 400–500 °C. Interestingly, N 2 synthesis behavior of innovative Ru-Ni bimetallic tandem catalyst surface possesses the lowest reaction energy barrier than other models, which is attributed to the adsorption capability of Ni layers and the catalytic activity of Ru atoms. The experimental results also demonstrate that under typical engine exhaust conditions, the H 2 production efficiency of 1 %Ru-3 %Ni/Al 2O 3 surpasses that of 1 %Ru/Al 2O 3 by 6.2 %, showcasing exceptional stability.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ammonia Synthesis and Nitrogen Reduction · Catalytic Processes in Materials Science · Catalysts for Methane Reforming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Energy analysis of DI-CI engine with nickel oxide nanoparticle added Azadirachta indica biofuel at different static injection timing based on exergy10.1016/j.energy.2023.126622 ↗
2. Assessing the green energy development in China and its carbon reduction effect: Using a quantile approach10.1016/j.eneco.2023.106967 ↗
3. Performance and emission characteristics of an ammonia/diesel dual-fuel marine engine10.1016/j.rser.2023.113631 ↗
4. Experimental study on Miller cycle hydrogen-enriched ammonia engine by rich-burn strategy10.1016/j.fuel.2023.128899 ↗
5. Toward highly-efficient combustion of ammonia–hydrogen engine: Prechamber turbulent jet ignition10.1016/j.fuel.2023.129009 ↗
6. A comprehensive review of the promising clean energy carrier: Hydrogen production, transportation, storage, and utilization (HPTSU) technologies10.1016/j.fuel.2023.129455 ↗
7. Hydrogen production from burning and reforming of ammonia in a microreforming system10.1016/j.enconman.2011.12.005 ↗
8. Recent advances in green hydrogen production, storage and commercial-scale use via catalytic ammonia cracking10.1016/j.cej.2023.145381 ↗
9. Thermo-catalytic reforming of general waste to produce biofuels10.1016/j.biombioe.2023.106946 ↗
10. Numerical study on combustion and emission characteristics of a spark-ignition ammonia engine added with hydrogen-rich gas from exhaust-fuel reforming10.1016/j.fuel.2022.125939 ↗
11. Electrochemical template synthesis of Ni–Cu bilayer hollow microtubes for green hydrogen production through electrocatalytic reforming of ethanol10.1016/j.ijhydene.2022.03.277 ↗
12. Photocatalytic hydrogen production using liquid phase plasma from ammonia water over metal ion-doped TiO2 photocatalysts10.1016/j.cattod.2021.11.010 ↗
13. Plasma reforming for enhanced ammonia-air ignition: a numerical study10.1016/j.jfueco.2022.100070 ↗
14. Plasma-catalytic ammonia decomposition using a packed-bed dielectric barrier discharge reactor10.1016/j.ijhydene.2022.07.102 ↗
15. Electrochemical nitrogen fixation and utilization: Theories, advanced catalyst materials and system design10.1039/C9CS00159J ↗
16. Bifunctional interstitial phosphorous doping strategy boosts platinum-zinc alloy for efficient ammonia oxidation reaction and hydrogen evolution reactio10.1007/s12274-023-5962-x ↗
17. Interface engineering of PtZn alloy and Nb2O5 for promoting ammonia oxidation reaction and hydrogen evolution reaction10.1021/acs.langmuir.3c02977 ↗
18. FeMo-based catalysts for H2 production by NH3 decomposition10.1016/j.apcatb.2012.06.011 ↗
19. Optimized coupling of ammonia decomposition and electrochemical oxidation in a tubular direct ammonia solid oxide fuel cell for high-efficiency power generation10.1016/j.apenergy.2021.118158 ↗
20. Low temperature H2 production from ammonia using ruthenium-based catalysts: Synergetic effect of promoter and support10.1016/j.apcatb.2015.02.011 ↗
21. Catalytic ammonia reforming: alternative routes to net-zero-carbon hydrogen and fuel10.1039/D2SC04672E ↗
22. Ammonia as hydrogen carrier: Advances in ammonia decomposition catalysts for promising hydrogen production10.1016/j.rser.2022.112918 ↗
23. Performance enhancement of ammonia-fueled engine by using dissociation catalyst for hydrogen generation10.1016/j.ijhydene.2013.11.098 ↗
24. Enhanced NH3 decomposition for H2 production over bimetallic M(M = Co, Fe, Cu)Ni/Al2O310.1016/j.fuproc.2021.106945 ↗
25. Carbon nanotubes-supported Ru catalyst for the generation of COx-free hydrogen from ammonia10.1016/j.cattod.2004.05.011 ↗
26. Recent advances of single-atom alloy catalyst: properties, synthetic methods and electrocatalytic applications
27. Surface segregation machine-learned with inexpensive numerical fingerprint for the design of alloy catalysts
28. CeO2-x modified Ru/γ-Al2O3 catalysts for ammonia decomposition reaction10.1016/j.jre.2023.01.017 ↗
29. Carbon-free H2 production from ammonia triggered at room temperature with an acidic RuO2/γ-Al2O3 catalyst10.1126/sciadv.1602747 ↗
30. Insights on the mechanism of enhanced selective catalytic reduction of NO with NH3 over Zr-doped MnCr2O4: a combination of in situ DRIFTS and DFT10.1016/j.cej.2019.123956 ↗
31. The first-principles investigation on the electronic structure and mechanism of LiH + NH3 → LiNH2 + H2 reaction10.1016/j.ijhydene.2012.09.167 ↗
32. Adsorption and decomposition of metal decorated phosphorene toward H2S, HCN and NH3 molecules10.1016/j.apsusc.2018.12.131 ↗
33. Theoretical study of NH3 decomposition on Pd-Cu (1 1 1) and Cu-Pd (1 1 1) surfaces: A comparison with clean Pd (1 1 1) and Cu (1 1 1)10.1016/j.apsusc.2016.02.231 ↗
34. New mechanism insights into methane steam reforming on Pt/Ni from DFT and experimental kinetic study10.1016/j.fuel.2020.117143 ↗
35. Methane dissociation on Pt (1 1 1), Ir (1 1 1) and PtIr (1 1 1) surface: a density functional theory study10.1016/j.apsusc.2013.08.008 ↗
36. Ammonia decomposition on Fe (1 1 0), Co (1 1 1) and Ni (1 1 1) surfaces: A density functional theory study10.1016/j.molcata.2012.01.023 ↗
37. Insights into CO2 removal mechanism via the carbonaceous surface in the exhaust gas of marine NG engines: a first-principles study10.1016/j.apsusc.2023.156542 ↗
38. Mechanistic studies of carbocycles on elemental mercury adsorption on carbonaceous surface10.1016/j.fuel.2021.122101 ↗
39. Effect of flue gas on elemental mercury removal capacity of defective carbonaceous surface: a first-principles study10.1016/j.jhazmat.2020.124013 ↗
40. First-principles insights into ammonia decomposition on WC (0001) surface terminated by W and C10.1016/j.apsusc.2021.150635 ↗
41. Catalytic ammonia decomposition for hydrogen production on Ni, Ru and Ni-Ru supported on CeO210.1016/j.ijhydene.2019.01.154 ↗
42. Performance of exhaust gas-natural gas reforming under simulated exhaust conditions from marine NG engine: an experimental and thermodynamic study10.1016/j.jclepro.2023.139879 ↗
43. A comparative theoretical study of the mechanism of ammonia decomposition on various Co/Ni catalysts using density functional theory10.1016/j.susc.2024.122483 ↗
44. First-principles calculations of ammonia decomposition on Ni (1 1 0) surface10.1016/j.susc.2011.11.030 ↗
45. Nickel perovskite catalysts for ammonia decomposition: DFT calculations and microreaction kinetics10.1016/j.colsurfa.2024.133898 ↗
46. Probing the effect of Pd coverage towards NH3 decomposition on Cu (1 0 0) surface10.1016/j.cplett.2019.05.022 ↗
47. Adsorption of the NO2, N2O and NH3 molecules over the C20 and MC19 (M = Ru, Ir and Au) clusters: A DFT approach
48. Mechanistic investigation of the catalytic decomposition of ammonia (NH3) on an Fe (1 0 0) surface: a DFT study10.1021/jp410947d ↗
49. Insight into exhaust gas-methane reforming over La2O3-modified Ni/Ca-Al for enhanced hydrogen-rich production10.1016/j.fuel.2024.130912 ↗
50. Hydrogen production from ammonia decomposition catalyzed by Ru nano-particles in alkaline molecular sieves under photothermal conditions