journal article·2024-09

Study on anti-ablation properties of HfB2-TaSi2 coatings prepared by atmospheric plasma spraying

Siyuan He, Yanbo Liu, Zhuang Ma, Shizhen Zhu, Ling Liu, GuangYi Mu, YingLu Li

Publisher page

Abstract

To improve the oxidation resistance of HfB 2-based coatings in high-temperature environments, HfB 2-TaSi 2 coatings with different TaSi 2 additions have been developed by using atmospheric plasma spraying technique(APS). The oxidation resistance of the coating was studied with oxyacetylene at 1750 °C. The results confirmed that the glass-phase SiO 2 layer formed by the coating ablation after adding TaSi 2 plays a role in sealing the pores. Meanwhile, Ta 2O 5 formed upon the oxidation of TaSi 2 increased the viscosity of the SiO 2 glass phase, which leads to a certain self-healing ability of the oxide layer. In addition, Ta 2O 5 reacts with HfO 2 to produce Hf 6Ta 2O 17 with excellent phase stability, which forms a dense equiaxed crystal band and has a strong oxygen inhibition ability. The HfB 2 coating containing 20 vol% TaSi 2 has the best oxidation resistance with a mass ablation rate of 4.85×10 −4 g/s. These results indicate that TaSi 2 modified HfB 2 coating has good ablative resistance, and provides effective ablative protection for carbon fiber reinforced carbon substrate.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Arc-Jet Testing on HfB2 - TaSi2 Models: Effect of the Geometry on the Aerothermal Behaviour[J]10.2174/1874146001003010010 ↗
2. Effect of TaSi2 addition on long-term ablation behavior of HfB2-SiC coating[J]10.1016/j.jeurceramsoc.2023.05.033 ↗
3. Oxidation ablation resistance of ZrB2-HfB2-SiC-TaSi2 coating prepared on C/C composite surface, [J]
4. Ultra-high temperature ceramic coating for carbon/carbon composites against ablation above 2000 K10.1016/j.ceramint.2017.11.066 ↗
5. Microstructure and evolution of iridium coating on the C/C composites ablated by oxyacetylene torch10.1016/j.actaastro.2009.08.008 ↗
6. Oxidation inhibition behaviors of the HfB2-SiC-TaSi2 coating for carbon structural materials at 1700 °C[J]10.1016/j.corsci.2020.108982 ↗
7. Arc-jet testing on HfB2 and HfC-based ultra-high temperature ceramic materials10.1016/j.jeurceramsoc.2007.11.021 ↗
8. Microstructural evolution of HfB2 based ceramics during oxidation at 1600–2000° C10.1179/1743676115Y.0000000018 ↗
9. Sintering and oxidation behavior of HfB2-SiC composites from 0 to 30 vol% SiC between 1450 and 1800 K10.1016/j.ceramint.2018.10.075 ↗
10. Preparation, ablation behavior and thermal retardant ability of C/C-HfB2-SiC composites10.1016/j.matdes.2017.07.041 ↗
11. Oxidation behavior of hot pressed ZrB2–SiC and HfB2–SiC composites10.1016/j.jeurceramsoc.2010.08.018 ↗
12. Ultra-high-temperature ceramic HfB2-SiC coating for oxidation protection of SiC-coated carbon/carbon composites.10.1111/ijac.12241 ↗
13. Gradient HfB2-SiC multilayer oxidation resistant coating for C/C composites10.1016/j.ceramint.2018.08.104 ↗
14. Tantalum addition to zirconium diboride for improved oxidation resistance
15. Marzban, A. (2010). Investigation of defects in thermal sprayed coatings using impedance spectroscopy (Doctoral dissertation, Northeastern University).
16. Structure, composition, and defect control during plasma spray deposition of ytterbium silicate coatings10.1007/s10853-015-9358-5 ↗
17. Properties of ALD HfTaxOy high-k layers deposited on chemical silicon oxide10.1016/j.mee.2006.07.003 ↗
18. Structural evolution and ablation mechanism of a hafnium carbide coating on a C/C composite in an oxyacetylene torch environment10.1016/j.corsci.2012.04.033 ↗
19. High-Temperature Oxidation: III. Zirconium and Hafnium Diborides10.1149/1.2424154 ↗
20. A model for the oxidation of ZrB2, HfB2 and TiB210.1016/j.actamat.2007.07.027 ↗
21. Effect of SiC, TaB 2 and TaSi 2 additives on the isothermal oxidation resistance of fully dense zirconium diboride10.1557/jmr.2009.0216 ↗
22. Oxidation resistance of fully dense ZrB2 with SiC, TaB2, and TaSi2 additives10.1111/j.1551-2916.2008.02368.x ↗
23. R.S. Roth, J.L. Wang, Phase Diagram for Ceramists 4392 (1970).
24. National Standard Committee of China, GJB323A-96: Measurement Standard of Ablation Properties of Materials, National Standard Committee of China, Beijing, 1996.
25. Effects of the second phase on the microstructure and ablation resistance of hfc coating on c/c composites10.1016/j.surfcoat.2018.03.023 ↗