Enhancing the thermoelectric and mechanical properties of Cu3SbSe4-based materials by defect engineering and covalent bonds reinforcement
Source abstract
Abstract
Here, a typical microwave hydrothermal-assisted synthesis method is utilized to fabricate Co/Sn co-doped Cu 3SbSe 4 materials. Experimental results demonstrate that the formation of a nanoscale Co 9Se 8 phase occurs when the solid solubility of Co is exceeded. This phase effectively enhances phonon scattering at the grain boundary`s high-density dislocation region, leading to a significant reduction in lattice thermal conductivity. Simultaneously, the interface between Co 9Se 8 and Cu 3SbSe 4 exhibits an energy filtering effect, resulting in an improved Seebeck coefficient. The maximum zT value of 0.62 is achieved in the Cu 3Sb 0.96Co 0.04Se 4 sample. To further regulate the carrier concentration, Sn atoms are introduced, leading to peak power factor and zT values of 865.98 μW·m −1·K −2 and 0.72, respectively. The incorporation of Co and Sn doping contributes to the enhancement of mechanical properties by reinforcing covalent bonds. Mechanical property testing of the materials indicates an improvement in mechanical performance upon doping with Co and Sn. This study provides valuable insights into the in-situ introduction of a second phase through element doping, thereby enhancing the comprehensive thermoelectric properties of Cu 3SbSe 4-based materials. Moreover, it establishes an experimental foundation for subsequent investigations into the materials` mechanical properties.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Modeling, experimental study and optimization on low-temperature waste heat thermoelectric generator system10.1016/j.apenergy.2010.02.013 ↗
2. Simultaneous power generation and heat recovery using a heat pipe assisted thermoelectric generator system10.1016/j.enconman.2014.12.001 ↗
3. Progress and Prospect of Thermoelectric Refrigeration
4. Thermoelectric coolers: Infinite potentials for finite localized microchip cooling10.1016/j.jmst.2021.12.069 ↗
5. High-performance tellurium-free thermoelectric module for moderate temperatures using α-MgAgSb/Mg2(Si,Sn)
6. Regulating thermoelectric properties of Eu0.5Ca0.5Zn2Sb2 through Mg dopant
7. Facile synthesize and enhanced thermoelectric performance of PbS with Cl doping and PbSe alloying10.1016/j.jallcom.2023.173413 ↗
8. Enhanced thermoelectric performance in n-type Mg3.2Sb1.5Bi0.5 doping with lanthanides at the Mg site10.1016/j.jmst.2022.02.054 ↗
9. Defect engineering synergistically modulates power factor and thermal conductivity of CuGaTe2 for ultra-high thermoelectric performance10.1016/j.jmst.2022.04.019 ↗
10. Synergetic effect of Bi and Al co-doping in GeTe-based thermoelectric materials leading to optimized carrier concentration tuning and high ZT10.1016/j.jallcom.2023.172574 ↗
11. Enhanced Thermoelectric Performance of n-Type PbTe via Carrier Concentration Optimization over a Broad Temperature Range
12. Copper telluride with manipulated carrier concentrations for high-performance solid-state thermoelectrics10.1016/j.jmst.2022.05.004 ↗
13. Tailoring band structure and Ge precipitates through Er and Sb/Bi co-doping to realize high thermoelectric performance in GeTe10.1016/j.cej.2023.145820 ↗
14. Enhanced thermoelectric performance of SnSe by controlled vacancy population10.1186/s40580-023-00381-7 ↗
15. Electronic structure and low-temperature thermoelectric transport of TiCoSb single crystals10.1039/D2NR02556F ↗
16. Structural Modularization of Cu2Te Leading to High Thermoelectric Performance near the Mott-Ioffe-Regel Limit
17. Influence of biaxial strain on the electronic and thermoelectric properties of Sb2Te3 monolayer10.1016/j.materresbull.2022.111979 ↗
18. Enhancing Carrier Mobility and Seebeck Coefficient by Modifying Scattering Factor10.1002/aenm.202300312 ↗
19. Enhancing thermoelectric performance of n-type AgBi3S5 through synergistically optimizing the effective mass and carrier mobility
20. Ag2Q-Based (Q = S, Se, Te) Silver Chalcogenide Thermoelectric Materials
21. Beyond phase-change materials: Pseudo-binary (GeTe)n(Sb2Te3)m alloys as promising thermoelectric materials
22. First-principles calculations to investigate structural and mechanical properties of MoS2/MoSe2 vertical and lateral Superlattice10.1016/j.rinp.2023.106234 ↗
23. Discovery of YbNiSb-Based Half-Heusler Alloys as Promising Thermoelectric Materials
24. Strong anharmonic phonon scattering and superior thermoelectric properties of Li2NaBi
25. Strong acoustic-optical phonon coupling in high-performance thermoelectric material Bi0.5Sb1.5Te3
26. Mediating Point Defects Endows n-Type Bi2Te3 with High Thermoelectric Performance and Superior Mechanical Robustness for Power Generation Application10.1002/smll.202201352 ↗
27. Revealing the Defect-Dominated Electron Scattering in Mg3Sb2-Based Thermoelectric Materials br10.34133/2022/9875329 ↗
28. Ultralow Lattice Thermal Conductivity in SnTe by Incorporating InSb10.1021/acsami.0c03315 ↗
29. Properties and influence of microstructure and crystal defects in Fe2VAl modified by laser surface remelting10.1016/j.scriptamat.2020.10.050 ↗
30. Dense dislocations induced ductile SnTe thermoelectric semiconductor over a wide range of temperatures10.1016/j.jmst.2022.11.003 ↗
31. Dense dislocations enable high-performance PbSe thermoelectric at low-medium temperatures10.1038/s41467-022-34227-3 ↗
32. Superior thermoelectric performance in non-stoichiometric Cu3SbSe4 system: Towards synergistic optimization of carrier and phonon transport10.1016/j.materresbull.2023.112434 ↗
33. Tuning Ag content to achieve high thermoelectric properties of Bi-doped p-type Cu3SbSe4-based materials10.1016/j.jallcom.2021.159659 ↗
34. Improvement of thermoelectric properties of Cu 3 SbSe 4 compound by In doping10.1016/j.matdes.2016.03.001 ↗
35. Enhanced thermoelectric properties of Cu3SbSe4 by germanium doping10.1016/j.matlet.2016.10.011 ↗
36. Improvement of thermoelectric properties of Cu3SbSe4 hierarchical with in-situ second phase synthesized by microwave-assisted solvothermal method10.1016/j.jallcom.2019.07.292 ↗
37. High thermoelectric figure of merit in the Cu3SbSe4-Cu3SbS4 solid solution10.1063/1.3605246 ↗
38. Thermoelectric properties of Sn-doped p-type Cu3SbSe4: a compound with large effective mass and small band gap10.1039/C4TA01957A ↗
39. Enhancement of low-temperature thermoelectric performance via Pb doping in Cu3SbSe410.1016/j.jpcs.2022.111197 ↗
40. Realizing ultralow thermal conductivity in Cu3SbSe4 via all-scale phonon scattering by co-constructing multiscale heterostructure and IIIB element doping
41. Band Engineering for Realizing Large Effective Mass in Cu3SbSe4 by Sn/La Codoping10.1021/acs.jpcc.0c01465 ↗
42. Self-assembled 3D flower-like hierarchical Ti-doped Cu3SbSe4 microspheres with ultralow thermal conductivity and high zT10.1016/j.nanoen.2018.04.035 ↗
43. Synergistic modulation of power factor and thermal conductivity in Cu3SbSe4 towards high thermoelectric performance10.1016/j.nanoen.2020.104658 ↗
44. Unconventional Doping Effect Leads to Ultrahigh Average Thermoelectric Power Factor in Cu3SbSe4-Based Composites
45. High thermoelectric performance and compatibility in Cu3SbSe4–CuAlS2 composites10.1039/D3EE00128H ↗
46. Boosting thermoelectric performance in Cu3SbS4-based compounds through incorporating SiC nanoparticles
47. Enhancing thermoelectric and mechanical properties of p-type Cu3SbSe4-based materials via embedding nanoscale Sb2Se310.1016/j.matchemphys.2022.126669 ↗
48. Synergetic modulation of power factor and thermal conductivity for Cu3SbSe4-based system
49. Enhanced thermoelectric properties of Cu3SbSe4 via compositing with nano-SnTe10.1016/j.jallcom.2021.160358 ↗
50. Hybrid structure responsible for improved thermoelectric performance of Sn-incorporated Cu3SbSe4 with a second phase CuSe10.1063/5.0011146 ↗
51. Bl?chl and E. P, Projector augmented-wave method, 50 (1994) 17953-17979.10.1103/PhysRevB.50.17953 ↗
52. John, P., Perdew, et al., Generalized Gradient Approximation Made Simple, (1996).10.1103/PhysRevLett.77.3865 ↗
53. Perdew · Gen. Gradient Approx. Made Simple · 1998 · 77 · 3865
54. Theoretical study of defects Cu3SbSe4: Search for optimum dopants for enhancing thermoelectric properties10.1016/j.jallcom.2014.11.031 ↗
55. Baroni, D. Gironcoli, Stefano, et al., Phonons and related crystal properties from density-functional perturbation theory, 73 (2001) 515--562.10.1103/RevModPhys.73.515 ↗
56. Lower limit to the thermal conductivity of disordered crystals10.1103/PhysRevB.46.6131 ↗
57. Covalent radii revisited10.1039/b801115j ↗
58. Reinforcing bond covalency for high thermoelectric performance in Cu3SbSe4-based thermoelectric material10.1007/s40843-023-2498-y ↗
59. Enhancing thermoelectric performance in hierarchically structured BiCuSeO by increasing bond covalency and weakening carrier–phonon coupling10.1039/C7EE00464H ↗