Formation mechanism of AlNbTiVZr high entropy alloy/Ti multi-principal element alloy by laser direct energy deposition: Microstructure evaluation and mechanical properties
Source abstract
Abstract
A novel refractory multi-principal element alloy with high strength and toughness matching characteristics was successfully prepared by mixing TA15 alloy with AlNbTiVZr high-entropy alloy. The effects of the composition ratio of the high-entropy alloy on the microstructure evolution and its influence on properties were investigated in this study. The tensile strength of the 70 wt % AlNbTiVZr HEA/Ti multi-principal element alloy is 1.18 times more than that of TA15 alloy, which has a value of 1068.0 ± 2.1 MPa. The increase in strength is mainly due to the production of equiaxed fine grains and the development of a robust and resilient body-centered cubic (BCC) phase in the alloy following the introduction of the high-entropy alloy. The attainment of the acceptable tensile strain is the result of the combined influence of the BCC matrix phase and the dispersed second-phase particles. The exceptional mechanical capabilities of the 70 wt % AlNbTiVZr/Ti multi-principal element alloy undeniably enhance its potential for use as a structural component in aerospace load-bearing constructions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Microstructure and texture characteristics of pure Ti with a superior combination of strength and ductility10.1016/j.msea.2021.140915 ↗
2. Microstructural characterization and wear performance of shot-peened TA15 titanium alloy fabricated by SLM10.1016/j.matchar.2024.113747 ↗
3. High-temperature “Inverse” Hall-Petch relationship and fracture behavior of TA15 alloy10.1016/j.ijplas.2024.103951 ↗
4. Pressure-induced excellent corrosion resistance of Ti-45Al-8Nb alloy10.1016/j.matlet.2023.135446 ↗
5. Effect on microstructural and mechanical properties of selective laser melted pure Ti parts using stress relief heat-treatment process10.1016/j.jmrt.2023.09.288 ↗
6. Fe nanoparticles modified pure Ti alloy on microstructure evolution and fine crystallization mechanism fabricated by additive manufacturing10.1016/j.jmrt.2023.08.221 ↗
7. Hot deformation characteristics and mechanism understanding of Ti–6Al–2Sn–4Zr–6Mo titanium alloy10.1016/j.jmrt.2022.08.044 ↗
8. Recent advances in silicon containing high temperature titanium alloys10.1016/j.jmrt.2021.08.117 ↗
9. Effects of process parameters on the microstructure and mechanical properties of a laser micro-alloying TiB/Ti–6Al–4V titanium matrix composite10.1016/j.msea.2023.144988 ↗
10. Investigation on the evolution of deposition layer grain structure and its effect on mechanical properties in aluminum alloy fabricated by laser directed energy deposition10.1016/j.msea.2023.145866 ↗
11. Process parameter optimization for laser directed energy deposition (LDED) of Ti6Al4V using single-track experiments with small laser spot size10.1016/j.optlastec.2024.110861 ↗
12. Enhancement of strength and ductile-brittle transition temperature of SA508 Gr.3 low-alloy steel by controlling heat accumulation in laser powder-directed energy deposition10.1016/j.jmst.2024.02.042 ↗
13. Crack defects and formation mechanism of FeCoCrNi high entropy alloy coating on TC4 titanium alloy prepared by laser cladding10.1016/j.jallcom.2022.163905 ↗
14. Microstructure evolution and tribological properties of (TiB+TiC)/Ti–6Al–4V composites fabricated via in situ laser-directed energy deposition of wire and powders in an underwater environment10.1016/j.compositesb.2023.110817 ↗
15. Friction and wear behavior of titanium matrix (TiB+TiC) composites10.1016/j.wear.2010.12.072 ↗
16. Microstructure and friction/wear behavior of (TiB+TiC) particulate-reinforced titanium matrix composites10.1016/j.wear.2014.05.013 ↗
17. Preparation and mechanical properties of titanium alloy matrix composites reinforced by Ti3AlC and TiC ceramic particulates10.1016/j.jallcom.2021.161216 ↗
18. Fabrication and mechanical properties of network structured titanium alloy matrix composites reinforced with Ti2AlC particulates10.1016/j.msea.2020.139065 ↗
19. Nano-TiB whiskers reinforced Ti–6Al–4V matrix composite fabricated by direct laser deposition: microstructure and mechanical properties10.1016/j.jallcom.2022.166171 ↗
20. High strength and plasticity TiBw/TA15 composites with a novel columnar network structure10.1016/j.scriptamat.2023.115349 ↗
21. Microstructure evolution and tensile properties of as-rolled TiB/TA15 composites with network microstructure10.1016/j.msea.2021.140783 ↗
22. Microstructure and properties of high entropy alloy reinforced titanium matrix composites10.1016/j.matchar.2022.111856 ↗
23. Formation mechanism of interdiffusion layer and mechanical properties of Al0.6CoCrFeNi high-entropy alloy/Ti composites10.1016/j.jallcom.2023.169151 ↗
24. Bimodal grain size structure design to optimize the mechanical properties of TiZrNbTa high entropy alloys/Ti composites10.1016/j.msea.2022.143488 ↗
25. Strengthening effects of Al element on strength and impact toughness in titanium alloy10.1016/j.jmrt.2023.07.206 ↗
26. Effect of common alloying elements on α’ martensite start temperature in titanium alloys
27. Alloying element's substitution in titanium alloy with improved oxidation resistance and enhanced magnetic properties10.1016/j.jmmm.2016.08.046 ↗
28. Ultra-strong and ductile precipitation-strengthened high entropy alloy with 0.5% Nb addition produced by laser additive manufacturing10.1016/j.jmst.2023.11.053 ↗
29. TiZrNbTa)-Mo high-entropy alloys: dependence of microstructure and mechanical properties on Mo concentration and modeling of solid solution strengthening10.1016/j.intermet.2018.01.017 ↗
30. Strengthening in Al-, Mo- or Ti-doped CoCrFeNi high entropy alloys: a parallel comparison10.1016/j.jmst.2021.02.060 ↗
31. Additive manufacturing of titanium alloys with enhanced strength and uniform ductility via multi-element alloying10.1016/j.jmrt.2023.04.239 ↗
32. Additive manufacturing of fine-grained high-strength titanium alloy via multi-eutectoid elements alloying10.1016/j.compositesb.2022.110399 ↗
33. A lightweight Al0.8Nb0.5Ti2V2Zr0.5 refractory high entropy alloy with high specific yield strength10.1016/j.matlet.2022.133144 ↗
34. Structure and mechanical properties of B2 ordered refractory AlNbTiVZrx (x = 0–1.5) high-entropy alloys10.1016/j.msea.2017.08.019 ↗
35. Microstructure and mechanical properties of lightweight Ti3Zr1.5NbVAlx (x=0, 0.25, 0.5 and 0.75) refractory complex concentrated alloys10.1016/j.jmst.2022.05.005 ↗
36. High specific yield strength and superior ductility of a lightweight refractory high-entropy alloy prepared by laser additive manufacturing
37. A functionally graded material design from stainless steel to Ni-based superalloy by laser metal deposition coupled with thermodynamic prediction10.1016/j.matdes.2022.110612 ↗
38. A new pseudo binary strategy to design eutectic high entropy alloys using mixing enthalpy and valence electron concentration10.1016/j.matdes.2018.01.057 ↗
39. Study on hydrogen storage property of (ZrTiVFe)xAly high-entropy alloys by modifying Al content10.1016/j.ijhydene.2021.12.172 ↗
40. Gum-like mechanical behavior of a partially ordered Al5Nb24Ti40V5Zr26 high entropy alloy10.1016/j.intermet.2019.106652 ↗
41. Simultaneously healing cracks and strengthening additively manufactured Co34Cr32Ni27Al4Ti3 high-entropy alloy by utilizing Fe-based metallic glasses as a glue10.1016/j.jmst.2023.08.048 ↗
42. Electroplasticity in the Al0.6CoCrFeNiMn high entropy alloy subjected to electrically-assisted uniaxial tension10.1016/j.jmst.2022.11.031 ↗
43. Specific application method for determining the strength and fracture toughness of metal materials10.1016/j.tafmec.2023.103822 ↗
44. On the fracture behavior and toughness of TA15 titanium alloy with tri-modal microstructure10.1016/j.msea.2019.03.031 ↗
45. High temperature softening mechanism of powder metallurgy TA15 alloy10.1016/j.msea.2023.145160 ↗