Promoting nanoprecipitates via prefabricated defects to pin dislocations and grain boundaries for trading off high-strength and low-thermal-expansion of invar alloys
Source abstract
Abstract
Invar alloys that combine high strength with a low coefficient of thermal expansion (CTE) are urgently required for industrial applications. Based on the lower coarsening rate during aging and the CTE values of carbonitrides, a novel strategy is proposed to prepare carbonitrides by reducing carbon and increasing nitrogen to design high-strength and low-thermal-expansion invar alloys. The V(C, N) nanoprecipitate was introduced into the invar alloy, and its effects on the microstructure, thermal expansion behavior, and mechanical properties were investigated. The direct-aged alloy exhibited an enhanced tensile strength of 525 MPa and a ductility of 47.6 %. The cold-deformation aging alloy achieved an enhanced tensile strength of 815 MPa while retaining 7.4 % ductility and a low CTE value of 1.23×10 −6 /°C. The V(C, N) nanoprecipitates effectively immobilized dislocations and grain boundaries, leading to a high dislocation density and small grain size in the alloy. The contributions of each strengthening mechanism were calculated, and the precipitation and dislocation strengthening were found to be the main mechanisms of strength enhancement. These results provide a novel approach for preparing high-strength and low-CTE invar alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Investigation on microstructure and properties of laser solid formed low expansion invar 36 alloy10.1016/j.jmrt.2020.03.108 ↗
2. Effect of aging on microstructures and properties of Mo-alloyed Fe-36Ni invar alloy10.1016/j.msea.2015.12.018 ↗
3. Fe-Ni Invar alloys: A review
4. Modeling and simulation of the columnar-to-equiaxed transition during laser melting deposition of Invar alloy10.1016/j.jallcom.2018.04.313 ↗
5. Effect of surface roughness on the performances of laser-welded Invar 36 alloy joints10.1016/j.optlastec.2023.109307 ↗
6. Thermal expansion and heat capacity of some stainless steels and FeNi alloys10.1016/0011-2275(86)90084-6 ↗
7. Effect of alloying with V and Ti on microstructures and properties in Fe–Ni–Mo–C invar alloys10.1016/j.mtla.2019.100474 ↗
8. Influence of alloy elements on microstructure and properties of hot-rolled Fe-36Ni invar alloy
9. Microstructural and tensile behavior of Fe-36%Ni alloy after cryorolling and subsequent annealing10.1016/j.msea.2016.06.004 ↗
10. Experimental determination and thermodynamic evaluation of low-temperature phase equilibria in the Fe–Ni binary system10.1016/j.calphad.2019.101677 ↗
11. Effects of alloying elements on thermal expansion behavior of Ni-Fe-Cr-Based superalloys10.1007/s11661-018-4898-3 ↗
12. Effects of trace additions of magnesium on microstructure and properties of Fe–36Ni invar alloy10.1002/srin.202300047 ↗
13. The combined influence of grain size distribution and dislocation density on hardness of interstitial free steel10.1016/j.jmst.2019.11.025 ↗
14. Effect of cold drawing on microstructure and properties of the invar alloy strengthened by carbide-forming elements10.1016/j.jmrt.2021.05.026 ↗
15. Fe–Ni Invar alloy reinforced by WC nanoparticles with high strength and low thermal expansion10.1007/s42452-019-0182-4 ↗
16. Strengthening of Fe-36mass%Ni low thermal expansion alloy by additions of C, V, Ti, and Cr and the effect of reducing Ni on t 17hermal expansion10.2320/jinstmet.J2013053 ↗
17. Strengthening of the Fe-Ni invar alloy through chromium
18. A review of research and development on titanium microalloyed high strength steels10.1088/2053-1591/aacb61 ↗
19. Progress of MX type carbonitride reinforcement in reduced activated ferrite /martensitic heat-resistant steel
20. Nano-sized MX carbonitrides contribute to the stability of mechanical properties of martensite ferritic steel in the later stages of long-term aging10.1016/j.actamat.2019.06.012 ↗
21. Effects of Ce addition on mechanical properties and thermal expansion behavior of Fe-36Ni Invar alloy10.1016/j.matchar.2023.113584 ↗
22. Nanoprecipitates induced dislocation pinning and multiplication strategy for designing high strength, plasticity and conductivity Cu alloys10.1016/j.scriptamat.2021.113741 ↗
23. Control of dislocation density maximizing precipitation strengthening effect10.1016/j.jmst.2022.03.010 ↗
24. Lattice defects of cold-drawn and aged Fe-36wt%Ni alloys and effects of additions of C and V on hardness and thermal expansion10.2355/tetsutohagane.99.380 ↗
25. Effect of cold rolling on microstructure and texture evolution in strip casting Fe-36%Ni invar alloy foil10.1016/j.jallcom.2021.161519 ↗
26. Deformation behavior of Fe-36Ni steel during cryogenic (123–173 K) rolling10.1016/S1006-706X(16)30071-1 ↗
27. The relationship of hot and cold rolling processes with the structure and properties of invar 3610.1016/j.matchemphys.2022.127215 ↗
28. Investigation on the thermal expansion behavior of FeCoNi and Fe30Co30Ni30Cr10-xMnx high entropy alloys10.1016/j.matchemphys.2021.124907 ↗
29. Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation10.1038/nature22032 ↗
30. Role of vanadium additions on tensile and cryogenic-temperature charpy impact properties in hot-rolled high-Mn austenitic steels10.1016/j.msea.2021.141063 ↗
31. An EBSD analysis of Fe-36%Ni alloy processed by HPT at ambient and a warm temperature10.1016/j.jallcom.2018.04.194 ↗
32. Influence of recrystallization temperature on structure and property of thin cold rolling sheet of Fe-36Ni invar
33. Evolution of microstructure, mechanical properties and residual stress of a cold rolled invar sheet due to heat treatment10.3390/met12010110 ↗
34. Effects of temperatures on microstructure evolution and deformation behavior of Fe-32Ni by in-situ EBSD10.1016/j.msea.2023.145097 ↗
35. Effect of deformation temperature on dynamic recrystallization and CSL grain boundary distribution of Fe-36%Ni invar alloy10.1007/s11665-018-3126-z ↗
36. Effect of temperature on deformation mechanisms of AZ31 Mg-alloy under tensile loading10.1016/j.msea.2020.138957 ↗
37. On the formation of nanoscale intergranular intermetallic compound films in a Cu-5 at. pct Zr alloy10.1007/s11661-019-05360-4 ↗
38. Revealing the two-step nucleation and growth mechanism of vanadium carbonitrides in microalloyed steels10.1016/j.scriptamat.2020.06.041 ↗
39. L21-strengthened face-centered cubic high-entropy alloy with high strength and ductility10.1016/j.msea.2020.140056 ↗
40. Enhancement of strength and ductility in 6061Al alloy processed by cross accumulative roll bonding10.1016/S1003-6326(23)66239-9 ↗
41. Influence of homogenization treatment on microstructure and recrystallization behavior of 2195 Al–Li alloy10.1016/S1003-6326(23)66257-0 ↗
42. Effects of aging process on properties and precipitation kinetics of Cu-Cr-Zr alloy strips10.1016/S1003-6326(23)66271-5 ↗
43. Enhancing low thermal expansion behavior and strength via induced Zr-rich intermetallic phase in Fe-36Ni Invar alloy10.1016/j.matdes.2023.111644 ↗
44. Effect of Nb addition on microstructure and mechanical properties of 25CrNiMoV (DZ2) steel for high-speed railway axles10.1007/s42243-021-00613-2 ↗
45. Precipitation behavior of Ti–Nb–V–Mo quaternary microalloyed high strength fire-resistant steel and its influence on mechanical properties10.1016/j.msea.2021.140865 ↗
46. Influence of coiling temperature on microstructure and mechanical properties of a hot-rolled high-strength steel microalloyed with Ti, Mo and V10.1007/s42243-021-00645-8 ↗
47. Effect of NbC and VC carbides on microstructure and strength of high-strength low-alloyed steels for oil country tubular goods10.1016/j.msea.2021.141845 ↗
48. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
49. Development of the high-strength ductile ferritic alloys via regulating the intragranular and grain boundary precipitation of G-phase10.1016/j.jmst.2022.07.029 ↗
50. Comprehensive effect of nitrogen on Cr-Mo-V hot-working die steel with enhanced strength and toughness10.1016/j.msea.2019.138386 ↗
51. Effect of warm rolling on microstructures and properties of the high strength invar alloy10.1016/j.jmrt.2022.06.078 ↗
52. Effect of single roll drive rolling on microstructure, texture, and mechanical property anisotropy of Al-5.6Zn-2.5Mg-1.4Cu aluminum alloy10.1016/S1003-6326(23)66332-0 ↗
53. Precipitation process and age-hardenability of Fe-Ni-Be invar alloys, Scr
54. Effect of solid solution treatment on microstructure and performance of nitrogen microalloyed high strength invar alloy
55. Anisotropy of microstructure, mechanical properties and thermal expansion in Invar 36 alloy fabricated via laser powder bed fusion
56. Effects of V and C additions on the thermal expansion and tensile properties of a high strength invar base alloy10.5228/KSTP.2015.24.1.44 ↗
57. On the structural integrity of Fe-36Ni Invar alloy processed by selective laser melting