Thermal stability of refined Al6(Fe, Mn) phase formed in laser powder bed fusion process
Source abstract
Abstract
The addition of Mn in Al–Fe alloys stabilizes the Al6Fe metastable phase (orthorhombic structure, oC28) owing to the partial occupation of Fe sublattice sites by Mn atoms (formation of Al6(Fe, Mn) phase), thereby achieving superior high-temperature strength of Al–Fe–Mn ternary alloys that are manufactured via laser powder bed fusion (L-PBF) process. This study aimed to fundamentally understand the thermal stability of the refined Al6(Fe, Mn) phase formed in the L-PBF fabricated Al–2.5%Fe–2%Mn alloy in terms of a thermodynamic approach and the kinetics of morphological changes in the Al6(Fe, Mn) phase at elevated temperatures ranging from 200 to 500 ℃. The L-PBF processed samples showed a high hardness of approximately 125 HV due to the formation of numerous dispersoids of the Al6(Fe, Mn) phase with sizes of several tens of nanometers in the α-Al matrix containing concentrated solute elements of Fe and Mn. The hardness and microstructure were almost unchanged even after exposure to a high temperature of 200 ℃ for an extended period of 1000 h. Upon exposure to 300 ℃, nucleation and growth of the Al6(Fe, Mn) phase occurred locally, particularly at grain boundaries in the α-Al matrix. Such a local growth contributed to a reduction in hardness upon thermal exposure. Simultaneously, numerous nanoscale precipitates were formed in the α-Al matrix, resulting in a suppressed reduction in hardness. Contrary to the result of the thermodynamic calculations, the θ-Al13Fe4 phase was scarcely found even after long-term exposure to 500 ℃. The θ-phase formation was accompanied by the dissolution of the refined Al6Fe metastable phase for strengthening, which significantly reduced the hardness during thermal exposure. The suppressed θ-phase formation could be associated with the thermodynamically stable Al6(Fe, Mn) phase developed during the L-PBF process, which predominantly contributed to the high microstructural stability of the L-PBF fabricated Al–Fe–Mn alloy at elevated temperatures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
2. Basics of laser powder bed fusion
3. Additive manufacturing of metals: microstructure evolution and multistage control10.1016/j.jmst.2021.06.011 ↗
4. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
5. Additive manufacturing of ultrafine-grained high-strength titanium alloys10.1038/s41586-019-1783-1 ↗
6. A review of laser powder bed fusion additive manufacturing of aluminium alloys: microstructure and properties
7. Heat treatment of aluminium alloys produced by laser powder bed fusion: a review10.1016/j.matdes.2021.109651 ↗
8. Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg
9. Formation of multiple intermetallic phases in a hypereutectic Al–Fe binary alloy additively manufactured by laser powder bed fusion10.1016/j.intermet.2020.106892 ↗
10. Laser powder bed fusion of a near-eutectic Al–Fe binary alloy: processing and microstructure
11. Microstructures and mechanical properties of aluminum-transition metal binary alloys (Al-Fe, Al-Mn, and Al-Cr) processed by laser powder bed fusion10.1016/j.jallcom.2021.159680 ↗
12. Microstructure and mechanical property evolution of additive manufactured eutectic Al-2Fe alloy during solidification and aging10.1016/j.jallcom.2021.163243 ↗
13. The structure of the intermetallic phase FeAl610.1107/S0365110X65000610 ↗
14. Change in microstructural characteristics of laser powder bed fused Al–Fe binary alloy at elevated temperature10.1016/j.jmst.2021.04.038 ↗
15. High-temperature strength sustained by nano-sized eutectic structure of Al–Fe alloy manufactured by laser powder bed fusion10.1016/j.msea.2022.142782 ↗
16. Towards high-temperature applications of aluminium alloys enabled by additive manufacturing10.1080/09506608.2021.1951580 ↗
17. Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing10.1016/j.actamat.2020.07.014 ↗
18. Microstructure and properties of additively manufactured Al–Ce–Mg alloys10.1038/s41598-021-86370-4 ↗
19. Microstructure, tensile properties and thermal stability of AlMgSiScZr alloy printed by laser powder bed fusion10.1016/j.jmst.2020.08.033 ↗
20. Microstructural development and aging behavior of Al–Cr–Zr heat-resistant alloy fabricated using laser powder bed fusion10.1016/j.jmrt.2021.10.027 ↗
21. A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy10.1016/j.actamat.2022.117699 ↗
22. Effect of Er and Zr additions and aging treatment on grain refinement of aluminum alloy fabricated by laser powder bed fusion10.1016/j.jallcom.2022.165237 ↗
23. An Al-5Fe-6Cr alloy with outstanding high temperature mechanical behavior by laser powder bed fusion
24. Additive manufacturing of a quasicrystal-forming Al95Fe2Cr2Ti1 alloy with remarkable high-temperature strength and ductility
25. Tensile creep mechanisms of Al-Mn-Sc alloy fabricated by additive manufacturing
26. Toward the superior high-temperature strength of Al-5Fe alloy for powder bed fusion-laser beam: stabilizing Al6Fe nanoprecipitate by Sc and Zr elements10.1016/j.msea.2024.146351 ↗
27. Processability and optimization of laser parameters for densification of hypereutectic Al–Fe binary alloy manufactured by laser powder bed fusion10.3390/cryst11030320 ↗
28. The structure of FeAl310.1107/S0365110X55000637 ↗
29. Mechanical properties of Fe2Al5 and FeAl3 intermetallic phases at ambient temperature10.2355/tetsutohagane.TETSU-2015-063 ↗
30. Design of Al–Fe–Mn alloy for both high-temperature strength and sufficient processability of laser powder bed fusion
31. The structure of MnAl610.1107/S0365110X53000788 ↗
32. Thermodynamic assessment and experimental investigation of the systems Al–Fe–Mn and Al–Fe–Mn–Ni10.1016/j.calphad.2019.04.006 ↗
33. Design approaches for printability-performance synergy in Al alloys for laser-powder bed additive manufacturing10.1016/j.matdes.2021.109640 ↗
34. A criterion for cracking during solidification10.1016/j.actamat.2015.01.034 ↗
35. Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing10.1038/s41467-023-43563-x ↗
36. Anomalous strengthening by supersaturated solid solutions of selectively laser melted Al–Si-based alloys
37. Fast scanning calorimetry study of Al alloy powder for understanding microstructural development in laser powder bed fusion10.1016/j.matdes.2022.110830 ↗
38. Heat treatment of aluminium alloys produced by laser powder bed fusion: a review10.1016/j.matdes.2021.109651 ↗
39. Alloy design for aircraft engines10.1038/nmat4709 ↗
40. Reed · 2006 · 1
41. CompuTherm LLC, PanAluminum: Thermodynamic database for multi-component aluminum-rich casting and wrought alloys, https://computherm.com/panaluminum (accessed 5 Jan. 2024).
42. Crystallographic features of microstructure in maraging steel fabricated by selective laser melting10.3390/met8060440 ↗
43. Managing both high strength and thermal conductivity of a laser powder bed fused Al–2.5 Fe binary alloy: Effect of annealing on microstructure10.1016/j.msea.2020.140591 ↗
44. Laser-beam powder bed fusion of Al–Fe–Cu alloy to achieve high strength and thermal conductivity
45. Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments10.1016/j.msea.2017.08.029 ↗
46. Microstructural variations in laser powder bed fused Al–15% Fe alloy at intermediate temperatures10.3390/ma15134497 ↗
47. Precipitating thermally reinforcement phase in aluminum alloys for enhanced strength at 400C10.1016/j.jmst.2023.06.038 ↗
48. Introduction and comparison of new EBSD post-processing methodologies10.1016/j.ultramic.2015.08.001 ↗
49. Thermodynamic assessment of the aluminum-manganese (Al-Mn) binary phase diagram10.1361/105497199770335938 ↗
50. Porter · 2009 · 261
51. Effects of Mn and Cu additions on solidification microstructure and high-temperature strength of cast Al-Fe binary alloy10.2320/matertrans.MT-LA2022010 ↗
52. Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation10.1016/S0921-5093(03)00624-5 ↗
53. Kattner · 1993 · 12
54. Hillert · 2008 · 126
55. Control of Anisotropic Crystallographic Texture in Powder Bed Fusion Additive Manufacturing of Metals and Ceramics—A Review10.1007/s11837-021-04966-7 ↗
56. Manufacturing single crystals of pure nickel via selective laser melting with a flat-top laser beam
57. Review-Microstructural control and functional enhancement of light metal materials via metal additive manufacturing10.2320/matertrans.MT-MLA2022007 ↗
58. Creep resistance of cast and aged Al–0.1Zr and Al–0.1Zr–0.1Ti (at%) alloys at 300–400 ℃10.1016/j.scriptamat.2008.02.059 ↗
59. Controlling the addition of solute Ti in Al-Mg-Zn-Cu-Ni alloy for enhanced high-temperature creep properties10.1016/j.msea.2023.145859 ↗