Deformation behavior and microstructure characterization of the radially forged 2A50 aluminum alloy at high-temperature solid and semi-solid states
Source abstract
Abstract
The deformation behavior of a radially forged 2A50 aluminum alloy was investigated by thermal compression test at high-temperature solid (300–500 °C) and semi-solid (565–585 °C) states with strain rates of 0.01–0.5 s –1 . A strain-compensated Arrhenius constitutive equation was established to describe the relationship between flow stress and compression parameters. The inhomogeneous deformation and microstructure evolution of the specimen were explored. Results reveal that the strain-compensated Arrhenius model can accurately predict experimental flow stress in both two temperature states. In the high-temperature solid state, the equilibrium between the softening effect (dynamic recovery and dynamic recrystallization) and work hardening leads to a steady stage of the flow curves after peak. In the semi-solid temperature, the softening mechanisms mainly include the high level of dynamic recrystallization (DRX), lubrication of liquid phases, and partial collapse of solid-phase skeleton, contributing to a declining stage of flow stress after peak. Strain and temperature profoundly influence DRX. At high-temperature solid state, coarse and elongated grains predominate in the regions with small strain, whereas DRX and numerous subgrains massively occur in the regions with large strain. The entire sample compressed in semi-solid temperature is subjected to DRX, attributed to the elevated temperature compared to the high-temperature solid state. Fine DRX grains are concentrated at the center of the large deformation zone (with large strain) due to the frequent DRX. Elevating semi-solid temperature leads to the formation of large equiaxed grains. DRX facilitates the weakening of deformed textures, demonstrated by the presence of deformed textures (<111> and <100>//X0 fiber textures, <111>//Z0 fiber texture, and {110}<111> texture) in the sample at high-temperature solid state, contrasted with the absence of pronounced preferred orientation in semi-solid compressed sample.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. How aluminum changed the world: a metallurgical revolution through technological and cultural perspectives10.1016/j.techfore.2019.03.011 ↗
2. Semi-solid processing of engineering alloys by a twin-screw rheomoulding process10.1016/S0921-5093(00)01373-3 ↗
3. Grain morphology related microstructural developments in bulk deformation of 2219 aluminum alloy sheet at elevated temperature10.1016/j.msea.2019.06.022 ↗
4. A modified johnson–cook model and microstructure evolution of As-extruded AA 2055 alloy during isothermal compression10.3390/met12111787 ↗
5. Modified Zerilli-Armstrong and Khan-Huang-Liang constitutive models to predict hot deformation behavior in a powder metallurgy Ti-22Al-25Nb alloy10.1016/j.vacuum.2022.111749 ↗
6. Constitutive modelling of the 6061 aluminium alloy under hot rolling conditions and large strain ranges10.1016/j.matdes.2020.108568 ↗
7. New method to develop high temperature constitutive model of metal based on the Arrhenius-type model
8. Deformation characteristics and strain-compensated constitutive equation for AA5083 aluminum alloy under hot compression10.1016/S1003-6326(19)65131-9 ↗
9. Deformation characteristics and constitutive equations for the semi-solid isothermal compression of cold radial forged 6063 aluminium alloy10.3390/ma14010194 ↗
10. Establishment of macro-micro constitutive model and deformation mechanism of semi-solid Al606110.1016/j.jallcom.2020.157124 ↗
11. Constitutive equation and microstructural evolution of one distinctive Al–based hybrid composite reinforced by nano–AlN and micro–TiC particles during hot compression10.1016/j.msea.2023.145830 ↗
12. Influence of strain rate on hot deformation behavior and recrystallization behavior under isothermal compression of Al-Zn-Mg-Cu alloy10.1016/j.jallcom.2019.151788 ↗
13. Hot deformation and dynamic recrystallization in Al-Mg-Si alloy10.1016/j.matchar.2021.110976 ↗
14. Dynamic restoration and microstructural evolution during hot deformation of a P/M Al6063 alloy10.1016/j.msea.2012.02.031 ↗
15. Comprehensive study of hot compression behaviors and microstructure evolution of solutionized 6082 aluminum alloy extruded bar10.1016/j.jallcom.2022.167541 ↗
16. Deformation microstructure and thermomechanical processing maps of homogenized AA2070 aluminum alloy10.1016/j.msea.2022.142619 ↗
17. Hot workability and dynamic recrystallization behavior of a spray formed 7055 aluminum alloy10.1016/j.matchar.2021.111203 ↗
18. EBSD analysis on restoration mechanism of as-extruded AA2099 Al-Li alloy after various thermomechanical processes10.1016/j.matchemphys.2017.01.044 ↗
19. Kinetic model for describing continuous and discontinuous dynamic recrystallization behaviors of 2195 aluminum alloy during hot deformation10.1016/j.matchar.2021.111492 ↗
20. High temperature deformation behavior and microstructure evolution of wrought nickel-based superalloy GH4037 in solid and semi-solid states10.1016/S1003-6326(20)65248-7 ↗
21. Effect of semi-solid deformation on the restoration mechanisms and texture evolution in AA707510.1007/s11837-019-03835-8 ↗
22. Constitutive behavior of AZ80 M magnesium alloy compressed at elevated temperature and containing a small fraction of liquid10.1016/j.vacuum.2018.06.053 ↗
23. Modeling of continuous dynamic recrystallization of Al-Zn-Cu-Mg alloy during hot deformation based on the internal-state-variable (ISV) method10.1016/j.ijplas.2018.03.002 ↗
24. Improving mechanical anisotropy and corrosion resistance of extruded AA7075 alloy by warm cross rolling and annealing10.1016/j.jallcom.2021.158725 ↗
25. Obtaining uniform high-strength and ductility of 2A12 aluminum alloy cabin components via predeformation and annular channel angular extrusion10.3390/coatings12040477 ↗
26. Numerical and experimental study on the rheo-extrusion process of 2A50 aluminium alloy miniature gear10.1016/j.jmrt.2023.03.086 ↗
27. On the mechanism of hot deformation10.1016/0001-6160(66)90207-0 ↗
28. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
29. Hot compression deformation behavior and processing maps of Al–0.5Mg–0.4Si–0.1Cu alloy10.1016/j.jmrt.2022.07.027 ↗
30. Constitutive behavior and processing maps of a new wrought magnesium alloy ZE20 (Mg-2Zn-0.2Ce)10.1016/j.jma.2019.11.007 ↗
31. Zonal differences in deformation characteristics of AZ31 Mg alloy constrained by heterogeneous metals10.1016/j.jmrt.2021.06.013 ↗
32. Dynamic recrystallization behavior under inhomogeneous thermomechanical deformation state10.1002/srin.202200574 ↗
33. Thixotropic deformation behavior, rapid spheroidization and solid-liquid homogenization of semi-solid Al0.8Co0.5Cr1.5CuFeNi HEA with multilevel microstructure10.1016/j.scriptamat.2023.115384 ↗
34. Semi-solid thixotropic behavior and microstructure evolution of cold deformed CoCrCu1.2FeNi high-entropy alloy10.1016/j.matchar.2023.112926 ↗
35. Hot deformation and processing map of a typical Al–Zn–Mg–Cu alloy10.1016/j.jallcom.2012.10.114 ↗
36. Hot deformation behavior and microstructure evolution model of 7055 aluminum alloy10.1016/j.jmrt.2023.10.165 ↗
37. Dynamic recrystallization of wrought–solidified–wrought complex structure in Ni-based superalloys10.1002/adem.201400223 ↗
38. Microstructure evolution and physical-based diffusion constitutive analysis of Al-Mg-Si alloy during hot deformation10.1016/j.matdes.2019.108181 ↗
39. Hot deformation behavior and dynamic recrystallization mechanism of Ti2ZrTa0.75 refractory complex concentrated alloy10.1016/j.matchar.2023.113061 ↗
40. Flow softening and microstructural evolution of near β titanium alloy Ti-55531 during hot compression deformation in the α + β region10.1016/j.jallcom.2023.170165 ↗
41. Characterizations of microstructure and crystallographic orientation in a near-α titanium alloy billet10.1016/j.jallcom.2017.04.083 ↗
42. Effect of vacuum degrees on interfacial bonding behavior of 7050 aluminum alloy clad plates during hot-roll cladding
43. Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy10.1016/j.matdes.2022.111135 ↗
44. Microstructure evolution of AZ80 magnesium alloy in semi-solid compression by molecular dynamics simulation10.1016/j.jmrt.2023.08.209 ↗
45. Constitutive behavior of a SIMA processed magnesium alloy by employing repetitive upsetting-extrusion (RUE)10.1016/j.jallcom.2018.03.205 ↗
46. Dynamic recrystallization mechanisms of as-forged Al–Zn–Mg-(Cu) aluminum alloy during hot compression deformation10.1016/j.msea.2023.145236 ↗
47. Unveiling the microstructure evolution based on deformation mechanisms and dynamic recrystallization in as-extruded AZ31 Mg alloys during uniaxial compression10.1016/j.jallcom.2021.162417 ↗