In-situ formed porous silicon carbonitride/boron nitride composites to boost cathode performance in lithium sulfur batteries
Source abstract
Abstract
Carbon-rich polymer-derived SiCN ceramic matrix serves as a stabilizing host for sulfur cathodes due to its robust, stress-accommodating properties and well-conductive carbon network. Herein, novel SiCN-BN composites are synthesized through the annealing of a polymer-derived SiCN ceramic alongside boric acid and urea. The prepared cathodes exhibit significantly improved electrochemical performance after sulfur immobilization within the resulting composites. Of particular note is the material annealed at 950 °C, designated as SiCN-BN-950/S. It exhibits a reversible capacity of 445 mAh/g showcasing 62% capacity retention over 60 cycles, using electrodes with an areal density of 3.5 ~ 3.8 mg/cm2 and a sulfur loading of 66 wt.%. Its good cycling stability is attributed to the remarkable synergistic interplay between BN on the surface and disordered carbon present within the SiCN ceramic matrix. The presence of BN enables effective polar adsorption of polysulfides, while the in-situ formed porous carbon contributes to enhanced electrical conductivity. This combination significantly elevates the overall electrochemical performance of the sulfur cathode. The successful utilization of these novel SiCN-BN composites, a remarkable advancement in sulfur cathode technology, opens up possibilities for further enhancing the efficiency and stability of energy storage systems.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. 30 years of lithium-ion batteries
2. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
3. A brief review of post-lithium-ion batteries10.20964/2020.08.22 ↗
4. Challenges and prospects of lithium-sulfur batteries10.1021/ar300179v ↗
5. Lithium-sulfur batteries: electrochemistry, materials, and prospects10.1002/anie.201304762 ↗
6. Rechargeable lithium-sulfur batteries10.1021/cr500062v ↗
7. Bilayer functional interlayer coupling defect and Li-ion channel for high-performance Li-S batteries10.1016/j.electacta.2022.141377 ↗
8. Cooperative catalysis of polysulfides in lithium-sulfur batteries through adsorption competition by tuning cationic geometric configuration of dual-active sites in spinel oxides
9. Designing high-energy lithium-sulfur batteries10.1039/C5CS00410A ↗
10. More reliable lithium-sulfur batteries: status, solutions and prospects10.1002/adma.201606823 ↗
11. Enhancing the reversibility of Li deposition/dissolution in sulfur batteries using high-concentration electrolytes to develop anode-less batteries with lithium sulfide cathode10.1016/j.jpowsour.2022.232323 ↗
12. Thin solid electrolyte separators for solid-state lithium-sulfur batteries10.1021/acs.nanolett.2c04216 ↗
13. Origin and acceleration of Insoluble Li2S2−Li2S reduction catalysis in ferromagnetic atoms-based lithium-sulfur battery cathodes
14. Selective chemisorption of polysulfides by porous molecular crystal: cathode host materials for lean-electrolyte lithium-sulfur cells with high electrochemical stability10.1016/j.jpowsour.2023.232891 ↗
15. Conductive porous vanadium nitride/graphene composite as chemical anchor of polysulfides for lithium-sulfur batteries
16. Mesoporous titanium nitride-enabled highly stable lithium-sulfur batteries10.1002/adma.201601382 ↗
17. Design of filamentous conductive catalyst as separator coating for high-efficiency lithium-sulfur batteries10.1016/j.cej.2023.147870 ↗
18. Stable lithium–sulfur cell separator with a high-entropy metal oxide modification10.1021/acs.energyfuels.3c02538 ↗
19. Advances in lithium–sulfur batteries: from academic research to commercial viability
20. Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes10.1038/nenergy.2016.132 ↗
21. The regulating role of carbon nanotubes and graphene in lithium-ion and lithium–sulfur batteries
22. Three-electrode in mono-electrolyte for integrated photo-assisted lithium sulfur battery10.1016/j.jpowsour.2022.232374 ↗
23. Paragenesis BN/CNTs hybrid as a monoclinic sulfur host for high rate and ultra-long life lithium–sulfur battery10.1039/C8TA09564G ↗
24. Thirty-minute synthesis of hierarchically ordered sulfur particles enables high-energy, flexible lithium-sulfur batteries10.1016/j.nanoen.2021.106459 ↗
25. Encapsulate lithium sulfide cathodes with carbon-doped MoS2 for fast kinetics in lithium-sulfur batteries, a theoretical study10.1016/j.actamat.2022.118441 ↗
26. NiCo5S8 structure with unique morphology as a cathode active material for all-solid-state lithium-sulfur batteries10.1016/j.cej.2022.138050 ↗
27. Pyrite FeS2 as an efficient adsorbent of lithium polysulphide for improved lithium-sulphur batteries10.1039/C6TA01214K ↗
28. Sulphur–TiO2 yolk–shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteries10.1038/ncomms2327 ↗
29. In situ reactive assembly of scalable core–shell sulfur–MnO2 composite cathodes10.1021/acsnano.5b07458 ↗
30. Twinborn TiO2-TiN heterostructures enabling smooth trapping-diffusion-conversion of polysulfides towards ultralong life lithium-sulfur batteries10.1039/C7EE01430A ↗
31. Enhanced adsorptions to polysulfides on graphene-supported BN nanosheets with excellent Li–S battery performance in a wide temperature range10.1021/acsnano.8b05534 ↗
32. Boron nitride nanosheet on gold as an electrocatalyst for oxygen reduction reaction: theoretical suggestion and experimental proof10.1021/ja500393g ↗
33. Boron nitride nanotubes and nanosheets10.1021/nn1006495 ↗
34. Porous boron nitride nanosheets for effective water cleaning10.1038/ncomms2818 ↗
35. Enhanced adsorptions to polysulfides on graphene-supported BN nanosheets with excellent Li-S battery performance in a wide temperature range10.1021/acsnano.8b05534 ↗
36. Highly catalytic boron nitride nanofiber in situ grown on pretreated ketjenblack as a cathode for enhanced performance of lithium–sulfur batteries10.1021/acsaem.0c01888 ↗
37. Effect of morphology of C-rich silicon carbonitride ceramic on electrochemical properties of sulfur cathode for Li-S battery10.1016/j.electacta.2021.138265 ↗
38. Electrochemical performance of carbon-rich silicon carbonitride ceramic as support for sulfur cathode in lithium sulfur battery10.3390/nano12081283 ↗
39. Carbon-rich SiCN ceramics as high capacity/high stability anode material for lithium-ion batteries10.1016/j.jpowsour.2013.02.046 ↗
40. Stable colloidal boron nitride nanosheet dispersion and its potential application in catalysis10.1039/c3ta12231j ↗
41. Preparation and capacity-fading investigation of polymer-derived silicon carbonitride anode for lithium-ion battery10.1021/acsomega.7b01462 ↗
42. Synthesis and thermal evolution of polysilazane-derived SiCN(O) aerogels with variable C content stable at 1600 °C10.1016/j.ceramint.2020.11.157 ↗
43. Boron nitride mesoporous nanowires with doped oxygen atoms for the remarkable adsorption desulfurization performance from fuels10.1021/acssuschemeng.6b01156 ↗
44. Reaction kinetics during non-isothermal solid-state synthesis of boron trioxide via boric acid dehydration10.1007/s11144-021-02084-8 ↗
45. Kinetic analysis of formation of boron trioxide from thermal decomposition of boric acid under non-isothermal conditions10.1007/s10973-017-6740-3 ↗
46. Thermal and hydrolytic decomposition of urea for automotive selective catalytic reduction systems: thermochemical and practical aspects10.1021/ie020950o ↗
47. Hiller · 2011
48. Lide · 2009
49. Boron oxide production kinetics using boric acid as raw material10.1021/ie300685x ↗
50. Boron nitride
51. XPS studies of amorphous SiCN thin films prepared by nitrogen ion-assisted pulsed-laser deposition of SiC target10.1016/S0925-9635(01)00422-8 ↗
52. Annealing behavior and hardness enhancement of amorphous SiCN thin films10.1116/1.2764080 ↗
53. Chemical bonding and electronic structure of B2O3, H3BO3, and BN: an ESCA, Auger, SIMS, and SXS study10.1063/1.439251 ↗
54. N-doped polymer-derived Si(N)OC: the role of the N-containing precursor10.1557/jmr.2015.44 ↗
55. Mechanical size effects of amorphous polymer-derived ceramics at the nanoscale: experiments and ReaxFF simulations10.1039/C9NR00958B ↗
56. XPS investigations of thick, oxygen-containing cubic boron nitride coatings10.1016/j.solidstatesciences.2010.05.029 ↗
57. Sulfur-infiltrated micro- and mesoporous silicon carbide-derived carbon cathode for high-performance lithium sulfur batteries10.1002/adma.201301579 ↗
58. Cathode porosity is a missing key parameter to optimize lithium-sulfur battery energy density10.1038/s41467-019-12542-6 ↗
59. S. Fu et al., Accurate characterization of full pore size distribution of tight sandstones by low-temperature nitrogen gas adsorption and high-pressure mercury intrusion combination method. 9, 80-100 (2021).10.1002/ese3.817 ↗
60. Effect of ultra-fast pyrolysis on polymer-derived SiOC aerogels and their application as anodes for Na-ion batteries
61. M. Thommes et al., Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report). 87, 1051-1069 (2015).10.1515/pac-2014-1117 ↗
62. Rechargeable lithium batteries and beyond: progress, challenges, and future directions10.1557/mrs.2014.62 ↗
63. Nitrogen-doped single-walled carbon nanohorns as a cost-effective carbon host toward high-performance lithium–sulfur batteries10.1021/acsami.7b17602 ↗