journal article·2024-03

Double-layered phase change materials featuring high photothermal conversion for stable thermoelectric power generation

Yu Xu, Fangyuan Sun, Lei Wang, Shubing Li, Wenjin Wang, Changlin Zhou, Chen Yang

Publisher page

Abstract

Organic solid-liquid phase change materials have attracted great attention in the field of photothermal conversion and energy storage due to their advantages such as high latent heat, low subcooling, stable chemical properties, and constant temperature during the phase change process. However, preparing organic composite phase change materials (CPCMs) with multiple desirable properties such as good shape stability, high thermal conductivity, high enthalpy, and excellent photothermal conversion efficiency, remains a challenge. Herein, using a rapid melt blending of expanded graphite (EG) into lauric acid (LA) and cold pressing technique, we constructed double-layered and shape-stabilized D-LA/EG composites. The upper layer consists of 20 wt% EG and 80 wt% LA, while the lower layer 6 wt% EG and 94 wt% LA. It was found that the prepared D-LA/EG exhibited good shape stability, high thermal conductivity, high enthalpy, and excellent photothermal conversion efficiency. More interestingly, when applied as a heat source for an all-solid-state thermoelectric generator in a photo-thermal-electric conversion system, a stable output voltage of 315 mV is generated after the light is ceased, which is attributed to the release of the heat stored in the CPCMs. This work provides a simple and economical strategy to synthesize and balance the above four properties CPCMs, which has potential applications in photo-thermal-electric conversion and solar energy utilization.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Phase Change Materials Research · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Balsa-based porous carbon composite phase change material with photo-thermal conversion performance for thermal energy storage10.1016/j.solener.2021.10.046 ↗
2. Degradation reduces greenhouse gas emissions while weakening ecosystem carbon sequestration of Moso bamboo forests10.1016/j.scitotenv.2023.162915 ↗
3. Fossil fuel energy and environmental performance in an extended STIRPAT model10.1016/j.jclepro.2021.126526 ↗
4. Development of a multigenerational energy system for clean hydrogen generation10.1016/j.jclepro.2021.126909 ↗
5. Metal‐free multi‐heteroatom‐doped carbon bifunctional electrocatalysts derived from a covalent triazine polymer10.1002/smll.202004342 ↗
6. A hierarchical thermal interface material based on a double self-assembly technique enables efficient output power via solar thermoelectric conversion10.1039/D2TA00818A ↗
7. Grid structure phase change composites with effective solar/electro-thermal conversion for multi-functional thermal application10.1016/j.carbon.2022.09.077 ↗
8. Elevating the photothermal conversion efficiency of phase-change materials simultaneously toward solar energy storage, self-healing, and recyclability10.1021/acsami.2c05302 ↗
9. Melanin-perovskite composites for photothermal conversion10.1002/aenm.201901753 ↗
10. Enhanced photothermal conversion capability of melamine foam-derived carbon foam-based form-stable phase change composites10.1016/j.enconman.2022.115693 ↗
11. Thermoelectricity: an Introduction to the Principles10.1149/1.2425888 ↗
12. Size-dependent transport and thermoelectric properties of individual polycrystalline bismuth nanowires10.1002/adma.200502194 ↗
13. Photothermal and thermoelectric power generation performance based on bionic structure and composite nanofluids10.1016/j.colsurfa.2023.131623 ↗
14. Inorganic thermoelectric materials: a review10.1002/er.5313 ↗
15. Thermal transport in amorphous materials: a review10.1088/0268-1242/31/11/113003 ↗
16. Design and electrothermal performance analysis of PV-PCM-TE system
17. Microcapsules composed of stearic acid core and polyethylene glycol‐based shell as a microcapsule phase change material10.1002/er.6431 ↗
18. Synthesis and characterization of organoclay and cellulose nanofibers modified with lauric acid eutectic as new phase change material (PCM) used in buildings for thermal energy storage10.1007/s10973-023-12025-3 ↗
19. Synthesis and properties of dynamic crosslinking polyurethane/PEG shape-stable phase change materials based on the diels-alder reaction10.1021/acsapm.3c00412 ↗
20. Characteristics of thermal storage heat pipe charged with graphene nanoplatelets enhanced organic phase change material10.1016/j.enconman.2022.115902 ↗
21. Largely enhanced thermal conductivity of poly (ethylene glycol)/boron nitride composite phase change materials for solar-thermal-electric energy conversion and storage with very low content of graphene nanoplatelets10.1016/j.cej.2017.01.045 ↗
22. Three-dimensional directional cellulose-based carbon aerogels composite phase change materials with enhanced broadband absorption for light-thermal-electric conversion10.1016/j.enconman.2022.115361 ↗
23. AlN micro-honeycomb reinforced stearic acid-based phase-change composites with high thermal conductivity for solar-thermal-electric conversion10.1039/D2TA08748K ↗
24. Cellulose nanofibril/carbon nanotube composite foam-stabilized paraffin phase change material for thermal energy storage and conversion10.1016/j.carbpol.2021.118585 ↗
25. Highly thermally conductive phase change composites with anisotropic graphene/cellulose nanofiber hybrid aerogels for efficient temperature regulation and solar-thermal-electric energy conversion applications
26. Double-layered and shape-stabilized phase change materials with enhanced thermal conduction and reversible thermochromism for solar thermoelectric power generation10.1016/j.cej.2021.132773 ↗
27. Enhanced thermal conductive lauric acid/g-C3N4/graphene composite phase change materials for efficient photo-thermal storage10.1016/j.fuel.2022.126279 ↗
28. Preparation of porous carbonized woods impregnated with lauric acid as shape-stable composite phase change materials10.1016/j.applthermaleng.2019.01.063 ↗
29. Thermal Performance of Lauric Acid/Bentonite/Carbon Nanofiber Composite Phase-Change Materials for Heat Storage
30. Preparation and properties of lauric acid-octadecanol/expanded graphite shape-stabilized phase change energy storage material
31. Thermal properties of lauric acid/high‐density polyethylene form‐stabilized phase change materials doped with hybrid carbon nanofillers
32. Preparation and thermal properties of palmitic acid @ZnO/Expanded graphite composite phase change material for heat storage10.1016/j.energy.2021.122972 ↗
33. Metal-organic framework derived magnetic phase change nanocage for fast-charging solar-thermal energy conversion10.1016/j.nanoen.2022.107383 ↗
34. Thermal properties and thermal conductivity enhancement of composite phase change material using sodium acetate trihydrate–urea/expanded graphite for radiant floor heating system10.1016/j.applthermaleng.2018.04.102 ↗
35. Thermal performance of lauric acid/bentonite/carbon nanofiber composite phase-change materials for heat storage
36. Palmitic acid/polyvinyl butyral/expanded graphite composites as form-stable phase change materials for solar thermal energy storage10.1016/j.apenergy.2018.07.068 ↗
37. Enhancing the solar absorption capacity of expanded graphite-paraffin wax composite phase change materials by introducing carbon nanotubes additives
38. Preparation of thermally conductive composite phase change materials and its application in lithium-ion batteries thermal management10.1016/j.est.2022.104857 ↗
39. A template-method synthesis of mesoporous-MgO/expanded graphite for enhancing thermal properties of methyl palmitate-lauric acid phase change materials
40. Low-cost and highly thermally conductive lauric acid-paraffin-expanded graphite multifunctional composite phase change materials for quenching thermal runaway of lithium-ion battery10.1016/j.egyr.2023.01.102 ↗
41. Design and preparation of Ag modified expanded graphite based composite phase change materials with enhanced thermal conductivity and light-to-thermal properties10.1016/j.est.2021.102936 ↗
42. Glutaric acid/expanded graphite composites as highly efficient shape-stabilized phase change materials at medium-temperature10.1016/j.est.2023.107038 ↗
43. Thermal conductivity of an organic phase change material/expanded graphite composite across the phase change temperature range and a novel thermal conductivity model10.1016/j.enconman.2014.11.040 ↗
44. Research on thermal conductivity of thermoelectric generator
45. One-step synthesis of graphene-based composite phase change materials with high solar-thermal conversion efficiency10.1016/j.cej.2021.132439 ↗
46. Energy harvesting and storage blocks based on 3D oriented expanded graphite and stearic acid with high thermal conductivity for solar thermal application10.1016/j.energy.2022.124198 ↗
47. Form-stable phase change materials enhanced photothermic conversion and thermal conductivity by Ag-expanded graphite10.1016/j.est.2022.105060 ↗
48. Construction of high thermal conductivity MOFs composite phase change materials with reinforced light-to-thermal conversion10.1016/j.solmat.2021.111339 ↗
49. Enhanced light-thermal conversion efficiency of mixed clay base phase change composites for thermal energy storage10.1016/j.clay.2020.105535 ↗
50. D‐mannitol‐based eutectic composite phase change materials with high thermal conductivity and solar‐thermal conversion10.1002/er.8271 ↗
51. Highly thermally conductive composite phase-change materials doped with two-dimensional heterogeneous nanohybrids for photo/electro-thermal energy storage10.1016/j.est.2022.106225 ↗
52. Optimization of supercooling, thermal conductivity, photothermal conversion, and phase change temperature of sodium acetate trihydrate for thermal energy storage applications10.1016/j.energy.2022.124280 ↗
53. Unsaturated polyester resin supported form-stable phase change materials with enhanced thermal conductivity for solar energy storage and conversion10.1016/j.renene.2021.04.033 ↗
54. Highly efficient thermal energy storage enabled by a hierarchical structured hypercrosslinked polymer/expanded graphite composite10.1016/j.ijheatmasstransfer.2019.119068 ↗
55. Polypyrrole-coated conjugated microporous polymers/expanded graphene carbon aerogels-based phase change materials composites for efficient energy conversion and storage10.1016/j.solmat.2022.111873 ↗