Enhanced thermoelectric and mechanical properties of polycrystalline cubic SnSe by AgBiTe2 alloying
Source abstract
Abstract
Recently, the cubic SnSe with multiple valleys and low thermal conductivity has become the focus of current research and receives extensive attention worldwide. However, the cubic SnSe is difficult to exist stably at normal temperature and pressure. In this work, the cubic rock-salt SnSe samples were successfully stabilized at room temperature by AgBiTe 2 alloying. Microstructure and thermoelectric properties of the Sn 1–2x(AgBi) xSe 1–2xTe 2x ( x = 0, 0.10, 0.15, 0.20, 0.25, 0.30) were studied systematically. With the increase of AgBiTe 2 addition, the crystal structure of SnSe gradually transformed from orthorhombic to cubic phase. Due to the doping of heterogeneous atoms and the phase structural transformation, the carrier concentration and carrier mobility of Sn 1–2x(AgBi) xSe 1–2xTe 2x were optimized, thus the electrical properties were significantly enhanced. An obviously enhanced zT max of 0.70 at 750 K and a zT ave of 0.29 (300–750 K) were achieved in Sn 0.50(AgBi) 0.25Se 0.50Te 0.50. In addition, the mechanical properties of Sn 1–2x(AgBi) xSe 1–2xTe 2x were also strengthened. A higher Vickers hardness of ∼1.8 GPa was obtained in Sn 0.40(AgBi) 0.30Se 0.40Te 0.60.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Heusler alloys: electronic and magnetic properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
2. Thermoelectric properties of Pnma and rocksalt SnS and SnSe10.3390/solids3010011 ↗
3. New trends, strategies and opportunities in thermoelectric materials: A perspective10.1016/j.mtphys.2017.06.001 ↗
4. Processing of advanced thermoelectric materials10.1007/s11431-017-9058-8 ↗
5. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
6. Rationally designing high-performance bulk thermoelectric materials10.1021/acs.chemrev.6b00255 ↗
7. Realizing high thermoelectric performance in polycrystalline SnSe via silver doping and germanium alloying10.1021/acsaem.9b01475 ↗
8. Cubic AgPbmSbTe2+m: bulk thermoelectric materials with high figure of merit10.1126/science.1092963 ↗
9. High-thermoelectric performance of nanostructured bismuth antimony telluride bulk alloys10.1126/science.1156446 ↗
10. Demonstration of electron filtering to increase the Seebeck coefficient in In0.53Ga0.47As/In0.53Ga0.28Al0.19As superlattices10.1103/PhysRevB.74.205335 ↗
11. Band engineering of thermoelectric materials10.1002/adma.201202919 ↗
12. Tuning multiscale microstructures to enhance thermoelectric performance of n-type Bismuth-Telluride-Based solid solutions10.1002/aenm.201500411 ↗
13. SnSe: a remarkable new thermoelectric material10.1039/C6EE01755J ↗
14. Study on thermoelectric properties of polycrystalline SnSe by Ge doping10.1007/s11664-017-5404-1 ↗
15. Enhanced thermoelectric performance of p-type SnSe doped with Zn10.1016/j.scriptamat.2016.08.009 ↗
16. Enhanced thermoelectric and mechanical properties of Na-doped polycrystalline SnSe thermoelectric materials via CNTs dispersion10.1016/j.jallcom.2018.01.178 ↗
17. Improvement of anisotropic thermoelectric performance in polycrystalline SnSe by metallic AgSnSe2 compositing10.1016/j.jallcom.2022.164649 ↗
18. Enhanced thermoelectric performance in p-type polycrystalline SnSe by Cu doping10.1007/s10854-018-9996-x ↗
19. The effects of Ge doping on the thermoelectric performance of p-type polycrystalline SnSe10.1039/C6RA23904H ↗
20. Rocksalt SnS and SnSe: native topological crystalline insulators10.1103/PhysRevB.88.235122 ↗
21. Thermodynamic properties of PbTe, PbSe, and PbS: First-principles study
22. Nontrivial thermoelectric behavior in cubic SnSe driven by spin-orbit coupling10.1016/j.nanoen.2018.07.019 ↗
23. Band flattening and phonon-defect scattering in cubic SnSe-AgSbTe2 alloy for thermoelectric enhancement
24. Modulation of the electronic structure and thermoelectric properties of orthorhombic and cubic SnSe by AgBiSe2 alloying10.1039/D1SC03696C ↗
25. Crystal structure modulation of SnSe thermoelectric material by AgBiSe2 solid solution10.1016/j.jeurceramsoc.2023.02.047 ↗
26. Suppressing charged cation antisites via Se vapor annealing enables p-type dopability in AgBiSe2-SnSe thermoelectrics10.1002/adma.202204132 ↗
27. Contrasting thermoelectric properties in cubic SnSe-NaSbSe2 and SnSe-NaSbTe2: high performance achieved via increasing cation vacancies and charge densities10.1016/j.actamat.2023.118754 ↗
28. Thermoelectric performance of (AgBiTe2)1-x(SnTe)x with stable cubic enabled by enhanced configurational entropy10.1007/s12598-022-02099-7 ↗
29. Band modification and localized lattice engineering leads to high thermoelectric performance in Ge and Bi codoped SnTe-AgBiTe2 alloys10.1002/smll.202301298 ↗
30. Ultralow thermal conductivity and high thermoelectric figure of merit in SnSe crystals10.1038/nature13184 ↗
31. Stabilizing n-type cubic GeSe by entropy-driven alloying of AgBiSe2: ultralow thermal conductivity and promising thermoelectric performance10.1002/anie.201809841 ↗
32. Ferroelectric instability induced ultralow thermal conductivity and high thermoelectric performance in rhombohedral p-type GeSe crystal10.1021/jacs.0c03696 ↗
33. Metavalent bonding in GeSe leads to high thermoelectric performance10.1002/anie.202101283 ↗
34. High-performance SnSe thermoelectric materials: progress and future challenge10.1016/j.pmatsci.2018.04.005 ↗
35. High thermoelectric and mechanical performance in the n-type polycrystalline SnSe incorporated with multi-walled carbon nanotubes10.1016/j.jmst.2021.12.002 ↗
36. Polycrystalline SnSe with extraordinary thermoelectric property via nanoporous design10.1021/acsnano.8b06387 ↗
37. In-situ formed nano-pore induced by Ultrasonication boosts the thermoelectric performance of Cu2Se compounds10.1016/j.jallcom.2021.160639 ↗
38. Enhanced Seebeck coefficient through energy-barrier scattering in PbTe nanocomposites10.1103/PhysRevB.79.115311 ↗
39. Microstructural effects on thermoelectric efficiency: a case study on magnesium silicide10.1016/j.actamat.2014.05.041 ↗
40. Thermoelectric transport properties of p-type silver-doped PbS with in situ Ag2S nanoprecipitates10.1088/0022-3727/47/11/115303 ↗
41. Polycrystalline SnSe with a thermoelectric figure of merit greater than the single crystal10.1038/s41563-021-01064-6 ↗
42. Realizing high figure of merit in phase-separated polycrystalline Sn1–xPbxS10.1021/jacs.6b07010 ↗
43. Studies on thermoelectric figure of merit of Na-doped p-type polycrystalline SnSe10.1039/C5TA08847J ↗
44. The thermoelectric performance of anisotropic SnSe doped with Na10.1039/C5RA19469E ↗
45. Thermoelectric transport properties of pristine and Na-doped SnSe1−xTex polycrystals10.1039/C5CP05510E ↗
46. Band gap estimation from temperature dependent seebeck measurement—deviations from the 2e|S|maxTmax relation10.1063/1.4905922 ↗
47. Heavily doped p-type PbSe with high thermoelectric performance: an alternative for PbTe10.1002/adma.201004200 ↗