Surface oxidation behavior and anti-ablation mechanism of plasma sprayed ZrC-ZrSi2-Al2O3 composite coating under plasma torch ablation
Source abstract
Abstract
A ZrC-ZrSi 2-Al 2O 3 coating system was designed and prepared by atmospheric plasma spraying. Densely packed whisker microstructure and alumina-zirconia hypoeutectic were found in the as-prepared coating. The surface oxidation behavior of this composite coating under plasma torch ablation was fully revealed based on the characterizations from macroscopic to microscopic perspectives. After 20 s ablation, the major phases on the coating surface are t-ZrO 2, Al 2O 3, SiO 2, ZrSiO 4, and ZrSi 2. ZrC-ZrSi 2 whiskers showed good integrity during the ablation process and finally, a dense Zr-Si-O layer was formed in the whisker area. Good coordination between alumina and zirconia is obtained by forming the solid solution and eutectic on the after-ablation coating surface. The as-prepared coating showed promising failure resistance under plasma torch ablation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Advanced structural ceramics in aerospace propulsion10.1038/nmat4687 ↗
2. Review on ultra-high temperature boride ceramics10.1016/j.pmatsci.2020.100651 ↗
3. Comparison of plasma sprayed NbB2-NbC coatings obtained by ex-situ and in-situ approaches10.1016/j.jeurceramsoc.2021.04.021 ↗
4. Preparation of ZrC nano-particles reinforced amorphous carbon composite coating by atmospheric pressure chemical vapor deposition10.1016/j.apsusc.2009.03.045 ↗
5. Microstructures and ablation resistance of ZrC coating for SiC-coated carbon/carbon composites prepared by supersonic plasma spraying10.1007/s11666-011-9676-3 ↗
6. A model for transitions in oxidation regimes of ZrB210.1111/j.1551-2916.2011.04927.x ↗
7. Ablation resistance of ZrC/SiC gradient coating for SiC-coated carbon/carbon composites prepared by supersonic plasma spraying10.1016/j.jeurceramsoc.2016.02.047 ↗
8. Ablation behavior of single and alternate multilayered ZrC-SiC coatings under oxyacetylene torch10.1016/j.jeurceramsoc.2021.11.008 ↗
9. Microstructure and properties of ZrC-SiC multi-phase coatings prepared by thermal evaporation deposition and an in-situ reaction method10.1016/j.surfcoat.2018.06.053 ↗
10. Ablation behaviors of ZrC-TiC coatings prepared by vacuum plasma spray: above 2000 °C10.1016/j.jeurceramsoc.2019.04.033 ↗
11. Microstructure and anti-ablation performance of HfC-TaC and HfC-ZrC coatings synthesized by CVD on C/C composites10.1016/j.ceramint.2020.01.006 ↗
12. Solubility, crystal growth, and film-formation mechanism of NbC-modified ZrC coating under oxyacetylene flame10.1016/j.apsusc.2023.157123 ↗
13. Effect of MoSi2 addition on ablation behavior of ZrC coating fabricated by vacuum plasma spray10.1016/j.ceramint.2018.02.093 ↗
14. Microstructures and ablation resistance of WSi2/ZrSi2/ZrxHf1−xC/SiC coating based on a pattern strengthening one-step method10.1016/j.jeurceramsoc.2020.09.011 ↗
15. Effect of the Al2O3 additive on the high temperature ablation behavior of the ZrC–ZrO2 coating for SiC-coated carbon/carbon composites10.1016/j.ceramint.2019.08.014 ↗
16. Long-time ablation protection of carbon/carbon composites with different-La2O3-content modified ZrC coating10.1016/j.jeurceramsoc.2017.09.050 ↗
17. Effect of monolithic LaB6 on the ablation resistance of ZrC/SiC coating prepared by supersonic plasma spraying for C/C composites10.1016/j.jmst.2016.06.019 ↗
18. Double layer ZrSi2–ZrC–SiC/SiC oxidation protective coating for carbon/carbon composites10.1179/1743294414Y.0000000428 ↗
19. SiC/SiC-ZrSi2 coating with micro-pore to protect C/C composites against oxidation for long-life service at high temperatures10.1016/j.corsci.2021.109780 ↗
20. A novel oxidation protective SiC-ZrB2-ZrSi2 coating with mosaic structure for carbon/carbon composites10.1016/j.ceramint.2018.05.108 ↗
21. Microstructure and oxidation property of CrSi2-ZrSi2-Y2O3/SiC coating prepared on C/C composites by supersonic atmosphere plasma spraying10.1016/j.surfcoat.2019.06.087 ↗
22. Ablation performance of C/C-ZrC-SiC composites with in-situ YSi2-doped ZrC-SiC-ZrSi2 coating under oxyacetylene torch10.1016/j.corsci.2022.110802 ↗
23. Effects of the La2O3 addition contents on the ablation performance of in-situ La-doped ZrC-SiC-ZrSi2 coating for C/C-ZrC-SiC composites10.1016/j.surfcoat.2022.129104 ↗
24. Self-densification behavior, interfacial bonding and cyclic ablation resistance of HfSi2-ZrSi2 modified SiC/ZrB2-SiC/SiC coating for Cf/SiC composite10.1016/j.corsci.2023.111223 ↗
25. Effect of Al2O3 addition on the ablation behavior of SiC-ZrC coated C/C composites10.1016/j.jallcom.2018.04.091 ↗
26. A novel Cr-doped Al2O3-SiC-ZrC composite coating for ablative protection of C/C-ZrC-SiC composites10.1016/j.jeurceramsoc.2018.02.015 ↗
27. In-situ synthesis, microstructure, and properties of NbB2-NbC-Al2O3 composite coatings by plasma spraying10.1007/s40145-022-0608-0 ↗
28. Study on the synthesis and growth mechanisms of the refractory ZrC whiskers10.1016/j.ijrmhm.2013.08.011 ↗
29. Synthesis of zirconium carbide whiskers by a combination of microwave hydrothermal and carbothermal reduction10.1016/j.jssc.2017.11.002 ↗
30. Chemical vapour deposition of zirconium carbide and silicon carbide hybrid whiskers10.1016/j.matlet.2009.12.002 ↗
31. Synthesis and characterization of zirconium carbide nanorods at low temperature10.1016/j.ijrmhm.2015.11.015 ↗
32. Fabrication and properties of Cf/ZrC-SiC-based composites by an improved reactive melt infiltration10.1111/jace.15534 ↗
33. Effect of Y2O3 contents on microstructural, mechanical, and antioxidative characteristics of Al2O3-ZrO2-Y2O3 coatings10.1016/j.apsusc.2022.153096 ↗
34. Direct additive manufacturing of melt growth Al2O3-ZrO2 functionally graded ceramics by laser directed energy deposition10.1016/j.jeurceramsoc.2022.01.034 ↗
35. Solid-state reaction synthesis of ZrC from zirconium oxide at low temperature10.1016/j.ijrmhm.2012.12.001 ↗
36. Effect of MgCl2 addition on the preparation of ZrC–SiC composite particles by sol-gel10.1016/j.ceramint.2021.10.034 ↗
37. High temperature oxidation resistance of La2O3-modified ZrB2-SiC coating for SiC-coated carbon/carbon composites10.1016/j.jallcom.2018.06.230 ↗
38. Ablation mechanism of ZrB2-SiC coating for SiC-coated graphite under an oxyacetylene flame10.1016/j.surfcoat.2018.07.031 ↗
39. Bubble phenomenon of ZrB2 based composites at high temperatures10.1016/j.ceramint.2018.12.153 ↗
40. Nanosized microstructure of Al2O3–ZrO2 (Y2O3) eutectics fabricated by laser engineered net shaping10.1016/j.scriptamat.2014.09.026 ↗
41. Combustion synthesis assisted water atomization-solid solution precipitation: a new guidance for nano-ZTA ceramics10.1016/j.jeurceramsoc.2019.05.049 ↗
42. Thermal properties and microstructures analysis of YSZ and YSZ-Al2O3 thermal barrier coatings10.1007/s11666-020-00996-w ↗