One-dimensional sepiolite confined ionic liquids structure to improve the electrochemical performance of polyethylene-oxide based composite polymer electrolyte
Source abstract
Abstract
Polyethylene-oxide (PEO) based composite polymer electrolytes (CPEs) with one-dimensional sepiolite confined ionic liquids (ILs) structure is constructed to further improve Li + conductivity and reduce cost. Silicon nanorods (SNRs) is obtained by microwave-assisted acid activation of sepiolite and then ILs is confined into SNRs by supercritical CO 2 fluid. The specific surface area of SNRs reduces from 170.88 m 2 g -1 to 2.19 m 2 g -1 after ILs confining, and the morphology and component of ILs in SNRs channel are clearly detected, indicating that the SNRs confined ILs structure (ILs@SNRs) is successfully obtained. The Li + conductivity of CPEs increases from 1.40 × 10 -6 S cm -1 to 0.922 × 10 -4 S cm -1, which indicates that ILs confined in SNRs provide a fast channel for Li + transmission. Besides, the reduction of PEO crystallinity is also favorable to Li + transmission. The corresponding lithium symmetrical battery and LiFePO 4 battery has excellent electrochemical performances. The good rate performance is attributed to the high Li + migration number of 0.261 compare to 0.122 of PEO. Compared with the simple mixing of polymer and ILs, the confined ILs in SNRs channel will not be lost, which maintains the stability of Li + transmission and reduces the consumption amount of ILs thus greatly reducing the cost of CPEs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. An improved 9 micron thick separator for a 350 Wh/kg lithium metal rechargeable pouch cell10.1038/s41467-022-34584-z ↗
2. Phenyl vinylsulfonate, a novel electrolyte additive to improve electrochemical performance of lithium-ion batteries10.3390/en15176205 ↗
3. Alternative combined co-estimation of state of charge and capacity for lithium-ion batteries in wide temperature scope10.1016/j.energy.2022.123236 ↗
4. Enhanced thermostability and electrochemical performance of separators based on an organic-inorganic composite binder composed of polyvinyl alcohol and inorganic phosphate for lithium ion batteries10.1016/j.jallcom.2021.162646 ↗
5. Towards high-energy-density lithium-ion batteries: Strategies for developing high-capacity lithium-rich cathode materials10.1016/j.ensm.2020.11.008 ↗
6. Ionic conductivity of nanocrystalline and amorphous Li10GeP2S12: the detrimental impact of local disorder on ion transport.10.1021/jacs.1c13477 ↗
7. Synthesis of Ga-doped Li7La3Zr2O12 solid electrolyte with high Li+ ion conductivity10.1016/j.ceramint.2020.09.047 ↗
8. Bridging interparticle Li+ conduction in a soft ceramic oxide electrolyte10.1021/jacs.0c12965 ↗
9. Improved lithium ionic conductivity in composite polymer electrolytes with oxide-ion conducting nanowires10.1021/acsnano.6b06797 ↗
10. Suppression of lithium dendrite growth using cross-linked polyethylene/poly(ethylene oxide) electrolytes: a new approach for practical lithium-metal polymer batteries10.1021/ja502133j ↗
11. Study on the suppression of lithium dendrites based on solid electrolyte Li7La3Zr2O12 with annealing treatment of Al interlayer10.1016/j.jallcom.2022.163908 ↗
12. PEO-urea-LiTFSI ternary complex as solid polymer electrolytes10.1016/j.polymer.2016.06.056 ↗
13. High ionic conductivity of composite solid polymer electrolyte via in situ synthesis of monodispersed SiO2 nanospheres in poly(ethylene oxide)10.1021/acs.nanolett.5b04117 ↗
14. In situ prepared nano-crystalline TiO2-poly(methyl methacrylate) hybrid enhanced composite polymer electrolyte for Li-ion batteries10.1039/c3ta00086a ↗
15. Influence of TiO2 nano-particles on charge carrier transport and cell performance of PMMA-LiClO4 based nano-composite electrolytes10.1016/j.electacta.2017.11.070 ↗
16. Metallic-lithium, LiFePO4-based polymer battery using PEO-ZrO2 nanocomposite polymer electrolyte10.1023/B:JACH.0000016623.42147.68 ↗
17. Incorporating 2D γ-Al2O3 nanosheets into the flexible PEO-based solid electrolyte for lithium metal batteries10.1016/j.electacta.2022.141504 ↗
18. Flexible, solid-state, ion-conducting membrane with 3d garnet nanofiber networks for lithium batteries10.1073/pnas.1600422113 ↗
19. Poly (2, 5-benzimidazole)/sulfonated sepiolite composite membranes with low phosphoric acid doping levels for PEMFC applications in a wide temperature range10.1016/j.memsci.2018.12.085 ↗
20. Design of sepiolite-supported ionogel-embedded composite membranes without proton carrier wastage for wide-temperature-range operation of proton exchange membrane fuel cells10.1039/C9TA03666K ↗
21. Microwave-assisted nitric acid treatment of sepiolite and functionalization with polyethylenimine applied to CO2 capture and CO2/N2 separation10.1016/j.apsusc.2017.03.054 ↗
22. Probing the local environment of hybrid materials designed from ionic liquids and synthetic clay by Raman spectroscopy10.1016/j.saa.2013.11.084 ↗
23. Study on thermal properties of polyurethane nanocomposites based on organo-sepiolite10.1016/j.polymdegradstab.2011.12.025 ↗
24. Simple method to determine electronic and ionic components of the conductivity in mixed conductors a review10.1007/BF02376083 ↗
25. Preparation and characterization of PEO-PMMA polymer composite electrolytes doped with nano-Al2O310.1016/j.electacta.2015.04.039 ↗
26. Ionanofluid plasticized electrolyte with improved electrical and electrochemical properties for high‐performance lithium polymer battery10.1002/er.5682 ↗
27. Measurement of transference numbers for lithium ion electrolytes via four different methods, a comparative study10.1016/j.electacta.2011.02.025 ↗
28. Strong Lewis Acid Base and Weak Hydrogen Bond Synergistically Enhancing Ionic Conductivity of Poly(ethylene oxide)@SiO2 Electrolytes for a High Rate Capability Li-Metal Battery10.1021/acsami.9b20128 ↗
29. Preparation of nanocomposite polymer electrolyte via in situ synthesis of SiO2 nanoparticles in PEO10.3390/nano10010157 ↗
30. Effects of the shapes of BaTiO3 nanofillers on PEO-based electrolytes for all-solid-state lithium-ion batteries10.1007/s11581-018-2706-0 ↗
31. A promising composite solid electrolyte incorporating LLZO into PEO/PVDF matrix for all-solid-state lithium-ion batteries10.1007/s11581-019-03320-x ↗