Phase stability enhancement in AlMo0.5NbTa0.5TiZr refractory high entropy alloy through Re addition
Source abstract
Abstract
In this research, the influence of Re addition on the thermal stability of the AlMo 0.5NbTa 0.5TiZr refractory high-entropy alloy was investigated. The based alloy (Re-free) has a microstructure consisted of body-centered cubic (BCC) and hexagonal close-packed (HCP) phases. This dual-phase microstructure was thermally instable and decomposed into a multiphase microstructure during aging treatment in the temperature range of 1000–1200 °C. In contrast, the Re-containing alloy exhibited significantly improved phase stability under the similar aging condition. The enhanced phase stability was attributed to the decelerated atomic diffusion, resulting from the addition of Re. While the segregation of Zr and consequent formation of large needle-like HCP precipitates were the major drawbacks in the microstructure of the aged base alloy, those phases were effectively restricted by the addition of Re, so that only spherical fine precipitates appeared in the microstructure of the aged Re-containing alloy. It turned out that the formation of new precipitates in the aged alloys substantially affects the hardness.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. On the effect of Re addition on microstructural evolution of a CoNi-based superalloy10.1016/j.actamat.2019.01.046 ↗
2. Hot cracking behavior and mechanism of the IC10 directionally solidified superalloy during laser re-melting10.1016/j.vacuum.2020.109563 ↗
3. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
4. Promising properties and future trend of eutectic high entropy alloys10.1016/j.scriptamat.2020.06.022 ↗
5. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
6. Ductile and brittle crack-tip response in equimolar refractory high-entropy alloys10.1016/j.actamat.2020.03.004 ↗
7. Microstructural design for improving ductility of an initially brittle refractory high entropy alloy
8. A novel AlMoNbHfTi refractory high-entropy alloy with superior ductility10.1016/j.jallcom.2023.168821 ↗
9. Phase stability and tensile properties of Co-free Al0.5CrCuFeNi2 high-entropy alloys10.1016/j.jallcom.2013.09.105 ↗
10. Effect of Cr and Zr on phase stability of refractory Al-Cr-Nb-Ti-V-Zr high-entropy alloys10.1016/j.jallcom.2018.05.099 ↗
11. Phase stability and deformation behavior of TiZrHfNbO high-entropy alloys10.3389/fmats.2020.589052 ↗
12. B2 to ordered omega transformation during isothermal annealing of refractory high entropy alloys: Implications for high temperature phase stability10.1016/j.jallcom.2023.170065 ↗
13. Phase stability and mechanical properties of AlHfNbTiZr high-entropy alloys10.1016/j.msea.2018.03.071 ↗
14. Phase stability and microstructure evolution in a ductile refractory high entropy alloy Al10Nb15Ta5Ti30Zr4010.1016/j.mtla.2019.100569 ↗
15. Phase stability as a function of temperature in a refractory high-entropy alloy10.1557/jmr.2018.223 ↗
16. Rhenium chemistry – then and now10.1016/j.ccr.2021.213822 ↗
17. Rhenium
18. Effect of Re and Ru on the phase stability and coarsening kinetics of L12 phase in a Ni29Co27Fe27Cr3Al7Ti7 high entropy alloy10.1016/j.jallcom.2021.158904 ↗
19. First hexagonal close packed high-entropy alloy with outstanding stability under extreme conditions and electrocatalytic activity for methanol oxidation10.1016/j.scriptamat.2017.05.022 ↗
20. WReTaMo refractory high-entropy alloy with high strength at 1600 °C10.1002/adem.202100765 ↗
21. Computational and experimental investigation of refractory high entropy alloy mo15nb20re15ta30w2010.1016/j.jmrt.2020.06.036 ↗
22. Effect of Re on the microstructure and mechanical properties of NbTiZr and TaTiZr equiatomic alloys10.3390/met11111819 ↗
23. Y. Li, J. Lee, B. Kang, S.H. Hong, Microstructure and Elevated-temperature Mechanical Properties of Refractory AlMo0.5NbTa0.5TiZr High Entropy Alloy Fabricated by Powder Metallurgy, 2017. 〈https://arxiv.org/abs/1801.00263v1〉 (Accessed February 18, 2022).
24. Effect of heat treatment regime on microstructure and phase evolution of AlMo0.5NbTa0.5TiZr refractory high entropy alloy10.1016/j.jallcom.2023.169818 ↗
25. Microstructure and properties of aluminum-containing refractory high-entropy alloys10.1007/s11837-014-1066-0 ↗
26. Influence of cooling rate on the microstructure and room temperature mechanical properties in the refractory AlMo0.5NbTa0.5TiZr superalloy10.1016/j.jallcom.2023.169871 ↗
27. Microstructural degradation of the AlMo0.5NbTa0.5TiZr refractory metal high-entropy superalloy at elevated temperatures10.3390/e23010080 ↗
28. The AlMo0.5NbTa0.5TiZr refractory high entropy superalloy: experimental findings and comparison with calculations using the CALPHAD method10.1016/j.matdes.2022.110593 ↗
29. Compositional variation effects on the microstructure and properties of a refractory high-entropy superalloy AlMo0.5NbTa0.5TiZr10.1016/j.matdes.2017.11.033 ↗
30. An assessment of the thermal stability of refractory high entropy superalloys10.1016/j.jallcom.2020.157583 ↗
31. Effect of Al content on the oxidation behavior of refractory high-entropy alloy AlMo0.5NbTa0.5TiZr at elevated temperatures10.1016/j.ijrmhm.2022.105812 ↗
32. Observation of a refractory metal matrix containing Zr-Ti-rich precipitates in a Mo0.5NbTa0.5TiZr high entropy alloy10.1016/j.scriptamat.2020.01.028 ↗
33. On the bcc/B2 interface structure in a refractory high entropy alloy10.1016/j.scriptamat.2022.115071 ↗
34. B. Su, J. Li, C. Yang, Y.Y. Zhang, Z. Li, Y.Y. Zhang, Microstructure and Mechanical Properties of a Refractory Almo0.5nbta0.5tizr High-Entropy Alloy Manufactured by Laser-Directed Energy Deposition, n.d. 〈https://papers.ssrn.com/abstract=4279257〉 (Accessed December 6, 2022).10.1016/j.matlet.2022.133748 ↗
35. Development of a refractory high entropy superalloy10.3390/e18030102 ↗
36. Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys10.1016/j.actamat.2014.01.029 ↗
37. Zr diffusion in BCC refractory high entropy alloys: a case of ‘non-sluggish’ diffusion behavior10.1016/j.actamat.2022.117970 ↗
38. Predicting equilibrium shape of precipitates as function of coherency state10.1016/j.actamat.2012.04.019 ↗
39. Effect of Zr on the as-cast microstructure and mechanical properties of lightweight Ti2VNbMoZrx refractory high-entropy alloys10.1016/j.ijrmhm.2021.105762 ↗
40. Microstructural evolution and phase formation in 2nd-generation refractory-based high entropy alloys10.3390/ma11020175 ↗
41. A novel ZrNbMoTaW refractory high-entropy alloy with in-situ forming heterogeneous structure10.1016/j.msea.2021.142061 ↗
42. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
43. Effect of vanadium addition on the microstructure and properties of AlCoCrFeNi high entropy alloy10.1016/j.matdes.2013.12.048 ↗
44. Effects of mixing enthalpy and cooling rate on phase formation of AlxCoCrCuFeNi high-entropy alloys10.1016/j.mtla.2019.100292 ↗
45. Effect of coherent lattice mismatch on the morphology and kinetics of ordered precipitates10.1007/s11665-018-3572-7 ↗
46. The effect of heat treatment on characteristics of the gamma prime phase and hardness of the nickel-based superalloy Rene®8010.1016/j.matchemphys.2019.01.038 ↗
47. Determination of the structure of α-β interfaces in metastable β-Ti alloys10.1016/j.actamat.2018.03.003 ↗
48. Analysis of plastic deformation in nanoscale metallic multilayers with coherent and incoherent interfaces10.1016/j.ijplas.2011.03.006 ↗
49. Strengthening effects of coherent interfaces in nanoscale metallic bilayers10.1016/j.commatsci.2009.01.013 ↗
50. Phase inversion in a two-phase, BCC+B2, refractory high entropy alloy10.1016/j.actamat.2019.12.004 ↗
51. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
52. R.C. Cammarata, K. Sieradzki, Surface and Interface Stresses, 24, 2003, pp. 215–234. 〈https://doi.org/10.1146/ANNUREV.MS.24.080194.001243〉.10.1146/annurev.ms.24.080194.001243 ↗
53. A critical review on energy conversion and environmental remediation of photocatalysts with remodeling crystal lattice, surface, and interface10.1021/acsnano.9b03649 ↗
54. Coherency and lattice misfit strain critically constrains electron-hole separation in isomaterial and heteromaterial Type-II heterostructures10.1021/acs.jpcc.9b08451 ↗
55. High temperature phase stability of the compositionally complex alloy AlMo0.5NbTa0.5TiZr10.1063/5.0069497 ↗