Entrainment defects in semi-solid A356 aluminum alloy treated by ICTE process
Source abstract
Abstract
The entrainment defects generated during the preparation of semi-solid slurries following the rheocasting technique impart poor mechanical and comprehensive properties to the casting. However, the mechanism of formation of these defects in semi-solid slurry has rarely been studied, so the mechanism of the formation of entrainment defects in the semi-solid A356 aluminum alloy be herein reported. The speed of the thermal equilibrium body (TEB) was maintained at 1300 and 2500 rpm where the entrainment defects of slurry were analyzed under conditions of internal cooling thermal equilibrium (ICTE). Results obtained using the SEM and computed tomography revealed the formation of bifilm defects, bubble trails, gas pores, and shrinkage pores in the slurry produced when the speed of rotation was 2500 rpm which resulted in lower elongation. The tensile specimens fabricated at the 2500 rpm speed were worse than those fabricated when the rotational speed was 1300 rpm in the aspect of elongation and reliability of mechanical properties. Results from numerical simulation and water simulation indicated that the phenomenon of surface turbulence promoted the formation of entrainment defects, and the bubbles entrapped inside the slurries could not escape according to the bubble theory floating calculation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Gating system design based on numerical simulation and production experiment verification of aluminum alloy bracket fabricated by semi-solid rheo-die casting process
2. Model for predicting radial temperature distribution of semi-solid slug produced by swirled enthalpy equilibration device (SEED) process10.1016/j.jmatprotec.2019.05.017 ↗
3. Microstructural and mechanical features of aluminium semi-solid alloys made by rheocasting technique10.1080/02670836.2016.1216263 ↗
4. Liquid segregation behaviour of a semi-solid squeeze cast A356 aluminium cup-shaped part10.1080/02670836.2017.1374498 ↗
5. Recent advances in commercial application of the rheometal process in China and Europe10.4028/www.scientific.net/SSP.285.405 ↗
6. Atomistic simulation of the formation and fracture of oxide bifilms in cast aluminum10.1016/j.actamat.2018.11.008 ↗
7. Current state of semi-solid net-shape die casting10.3390/met9121301 ↗
8. Current progress in rheoforming of wrought aluminum alloys: a review10.3390/met10020238 ↗
9. Microstructure evolution of a semisolid magnesium alloy slurry obtained via an Internal Rapid Cooling Stirring Process (IRCSP)10.1007/s11663-020-01956-z ↗
10. Guo · Transactions of Nonferrous Metals Society of China · 2016 · 10
11. Guo · J. Netshape Form. Eng. · 2020 · 12 · 9
12. Optimization of casting design parameters on fabrication of reliable semi-solid aluminum suspension control arm10.1007/s11665-017-2878-1 ↗
13. Microstructural and mechanical features of aluminium semi-solid alloys made by rheocasting technique
14. Development and achievements of SSM processes for high performance components10.4028/www.scientific.net/SSP.256.319 ↗
15. Formation of grain refined and non-dendritic microstructure of an aluminum alloy under angular oscillation10.1016/j.jallcom.2009.04.035 ↗
16. Blistering in semi-solid die casting of aluminium alloys and its avoidance10.1016/j.actamat.2016.11.032 ↗
17. Microstructure evolution in semi-solid A356 aluminium alloy treated by ICTE process10.1080/02670836.2022.2158274 ↗
18. Statistical distributions of fracture strengths of cast Al-7Si-Mg alloy10.1016/0921-5093(93)90226-5 ↗
19. On estimating Weibull modulus by the linear regression method10.1007/s10853-007-2060-5 ↗
20. Rozario · Rise of Gas Bubbles Across the Interface Between Two Liquids · 2018
21. Simulation of air entrainment during mold filling: comparison with water modeling experiments10.1007/s11663-018-1334-4 ↗
22. Role of double oxide film defects in the formation of gas porosity in commercial purity and Sr-containing Al alloys
23. Oxide inclusion defects in Al-Si-Mg cast alloys10.1179/cmq.2005.44.4.435 ↗
24. The consolidation of metals: the origin of bifilms10.1007/s10853-015-9399-9 ↗
25. Effect of Double Oxide Film Defects on Mechanical Properties of As-Cast C95800 Alloy, Acta Metallurgica Siniica (English Letters), 2017, vol. 30, p. 9.10.1007/s40195-016-0526-7 ↗
26. The nucleation of Fe-Rich phases on oxide films in Al-11.5Si-0.4Mg cast alloys
27. J. Campbell, O. Freng, Castings (Second Edition), Castings (Second Edition), 2003.
28. Effect of holding time before solidification on double-oxide film defects and mechanical properties of aluminum alloys10.1007/s11663-011-9571-9 ↗
29. Visualisation of oxide film defects during solidification of aluminium alloys10.1016/S1359-6462(00)00506-6 ↗
30. Vacuum-assisted rheo-forging process of A356 aluminum alloys10.1016/j.ijmachtools.2008.07.009 ↗
31. Chen, Qi, The effect of transition metal additions on double oxide film defects in Al alloy castings, (2017).
32. Modification of double oxide film defects with the addition of Mo to An Al-Si-Mg alloy10.1007/s11663-020-02038-w ↗
33. Morphology and fracture of oxide bifilm defects in nickel-aluminium bronze
34. Consumption of entrained gases within bifilms during a Mg-alloy casting process10.1007/s11663-021-02237-z ↗
35. Weibull analysis of mechanical data for castings: a guide to the interpretation of probability plots10.1007/s11661-010-0364-6 ↗
36. Mathematical model to estimate the duration of the atmosphere within a double oxide film defect in pure aluminum alloy10.1007/s11663-008-9142-x ↗
37. The behaviour of double oxide film defects in liquid Al alloys under atmospheric and reduced pressures10.1016/j.jallcom.2009.10.271 ↗
38. An overview of the effects of bifilms on the structure and properties of cast alloys10.1007/BF02735006 ↗
39. Numerical simulation and experimental validation of free surface flows during low pressure casting process10.1016/j.jmatprotec.2017.02.003 ↗
40. A study on semisolid processing of A356 aluminum alloy through vacuum-assisted electromagnetic stirring10.1007/s00170-011-3376-5 ↗
41. A study on bubbles in semisolid alloys