Synergetic regulation of hierarchical microstructure to improve the 704 ℃ tensile property in laser directed energy deposition IN718Plus superalloy
Source abstract
Abstract
IN718Plus superalloy with hierarchical microstructure has been successfully manufactured by laser directed energy deposition (LDED). Along building direction, microstructure varies from composing of epitaxial columnar grains oriented along <001> γ direction to equiaxed grains in flower like configuration. Striped Laves phase and fine γ`/γ`` precipitates form in the columnar grains, and would transform into fine Laves phase particles and nanoscale γ` precipitates at equiaxed layer. To improve the compositional homogeneity and microstructural stability, high temperature solution treatment has been explored on the superalloy. The treatment would not affect the morphology and orientation of columnar grains, but would redissolve Laves phase precipitates. Double aging treatment has also been performed to obtain homogeneous distributed γ` precipitates, and the synergistic regulation of microstructure enhances the mechanical property significantly, as causing the room temperature yield strength and tensile strength increased from 0.88 GPa and 1.14 – 1.04 GPa and 1.28 GPa, respectively. Moreover, the excellent mechanical property would be maintained upon 704 ℃, with yield strength of 0.93 GPa, tensile strength of 1.04 GPa and high elongation of 27.3%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Grain-boundary precipitation in Allvac 718Plus10.1016/j.actamat.2012.01.042 ↗
2. Three-dimensional characterization of an oxide scale on ATI 718Plus® superalloy10.1016/j.corsci.2020.108634 ↗
3. Enhancing tensile properties of wrought Ni-based superalloy ATI 718Plus at elevated temperature via morphology control of η phase10.1016/j.matchar.2020.110547 ↗
4. Additively manufactured hierarchical stainless steels with high strength and ductility10.1038/nmat5021 ↗
5. An overview of residual stresses in metal powder bed fusion
6. Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy10.1016/j.actamat.2008.11.004 ↗
7. Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy10.1016/j.actamat.2014.05.039 ↗
8. Prediction of microstructure in laser powder bed fusion process10.1016/j.actamat.2016.11.018 ↗
9. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
10. Effect of post-processes on the microstructure and mechanical properties of laser powder bed fused IN718 superalloy
11. Influence of powder characteristics and additive manufacturing process parameters on the microstructure and mechanical behaviour of Inconel 625 fabricated by Selective Laser Melting
12. Hierarchical microstructure of a titanium alloy fabricated by electron beam selective melting10.1016/j.jmst.2019.09.015 ↗
13. Additive manufacturing of metals: Microstructure evolution and multistage control10.1016/j.jmst.2021.06.011 ↗
14. Hierarchical grain size and nanotwin gradient microstructure for improved mechanical properties of a non-equiatomic CoCrFeMnNi high-entropy alloy10.1016/j.jmst.2021.02.059 ↗
15. Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming10.1016/j.jallcom.2018.07.087 ↗
16. Laser powder bed fusion of Inconel 718 on 316 stainless steel
17. Effects of circular beam oscillation technique on formability and solidification behaviour of selective laser melted Inconel 718: from single tracks to cuboid samples10.1016/j.jmst.2019.09.044 ↗
18. Investigations of γ′, γ″ and δ precipitates in heat-treated Inconel 718 alloy fabricated by selective laser melting10.1016/j.matchar.2018.01.006 ↗
19. Microstructure, precipitates and mechanical properties of powder bed fused inconel 718 before and after heat treatment10.1016/j.jmst.2018.12.006 ↗
20. The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing10.1016/j.actamat.2018.10.032 ↗
21. The mechanical and microstructural characteristics of laser-deposited IN10.1016/j.jmatprotec.2005.05.005 ↗
22. Effect of grain boundary misorientation on η phase precipitation in Ni-base superalloy 718Plus10.1016/j.matchar.2019.02.038 ↗
23. Effect of homogenization heat treatments on the cast structure and tensile properties of nickel-base superalloy ATI 718Plus in the presence of boron and zirconium additions10.1016/j.msea.2017.02.047 ↗
24. On the microstructure evolution during low cycle fatigue deformation of wrought ATI 718Plus alloy10.1016/j.msea.2020.140132 ↗
25. Microstructure evolution and underlying mechanisms during the hot deformation of 718Plus superalloy10.1016/j.msea.2020.139334 ↗
26. Creep performance and damage mechanism for Allvac 718Plus superalloy10.1016/j.msea.2018.09.088 ↗
27. Hot corrosion behaviour of wire-arc additive manufactured Ni-based superalloy ATI 718Plus®10.1016/j.corsci.2019.07.010 ↗
28. Analyses of anodically formed passive film and corrosion behavior of wire-arc additive manufactured ATI 718Plus® superalloy
29. Residual stresses and microstructure within Allvac 718Plus laser powder bed fusion bars
30. Improved dynamic impact behaviour of wire-arc additive manufactured ATI 718Plus®10.1016/j.msea.2018.09.079 ↗
31. Influence of post-deposition heat treatments on the microstructure and mechanical properties of wire-arc additively manufactured ATI 718Plus10.1007/s11661-019-05619-w ↗
32. The influence of solution temperature on microstructure evolution and mechanical properties of ATI 718Plus repaired by wire and arc additive manufacturing10.1016/j.msea.2022.143641 ↗
33. Deformation twinning during high temperature compression tests of the Ni-base superalloy ATI 718Plus®10.1016/j.actamat.2019.12.047 ↗
34. Microstructure and electrochemical anodic behavior of Inconel 718 fabricated by high-power laser solid forming10.1016/j.electacta.2018.04.186 ↗
35. Solidification and solid state phase transformation of Allvac (R) 718Plus (TM) alloy, Superalloys 718, 625, 706 and Derivatives
36. Effect of cold rolling on morphology of carbides and properties of 7Cr17MoV stainless steel10.1080/10426914.2014.952030 ↗
37. Effect of solution cooling rate on microstructure evolution and mechanical properties of Ni-based superalloy ATI 718Plus10.1016/j.msea.2021.141113 ↗
38. Microstructural analyses of ATI 718Plus® produced by wire-ARC additive manufacturing process10.1007/s11661-017-4162-2 ↗
39. The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 71810.1016/j.msea.2017.03.098 ↗
40. Anomalous precipitate-size-dependent ductility in multicomponent high-entropy alloys with dense nanoscale precipitates10.1016/j.actamat.2021.117480 ↗
41. Enhanced strength–ductility synergy and transformation-induced plasticity of the selective laser melting fabricated 304L stainless steel
42. A defect-resistant Co-Ni superalloy for 3D printing10.1038/s41467-020-18775-0 ↗
43. The cementite spheroidization process in high-carbon steels with different chromium contents10.1007/s11661-007-9403-3 ↗
44. Exploring the fatigue strength improvement of Cu-Al alloys10.1016/j.actamat.2017.11.019 ↗
45. Significance of stacking fault energy in bulk nanostructured materials: insights from Cu and its binary alloys as model systems10.1016/j.pmatsci.2018.11.001 ↗