journal article·2023-10

Enhanced multi-scale nanomechanical deformation behavior in reactive plasma sprayed Fe-based amorphous/TiN composite coating

Lintao Wu, Kaicheng Zhang, Zehua Zhou, Guangyu Wang, Xin Zhang

Publisher page

Abstract

Creep performance plays a pivotal role in evaluating the stability of materials during application. In particular, creep in amorphous alloys exhibits nonlinear and outburst characteristics. This work attempted to strengthen the Fe-based amorphous coating under loading by introducing TiN x ceramic material with high stability to the amorphous interlamellar. The results revealed that the creep resistance and indentation size effect of the composite coating were improved, compared with the monolithic Fe-based amorphous coating. The creep curves of both coatings can be well fitted by the Kelvin-Voigt formula composed of two relaxation processes. Moreover, the diffusion-mediated creep ratio of the composite coating was higher than that of the amorphous coating. And the composite coating had less free volume. Accordingly, more shear transition regions were activated synergistically during the deformation process, so the atom rearrangement effect was enhanced, which was well proved by the time relaxation spectrum and deformation characteristics. The expansion caused by excessive free volume in the amorphous shear band region caused plastic flow and strain softening. While the less free volume in the composite coating improved this situation, showing a less obvious indentation size effect. Ceramic phase doping appears to be a very effective and promising way to wield the plastic flow, accordingly to modify the amorphous coating.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · High-Temperature Coating Behaviors · Medieval Literature and History

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Wear behavior and corrosion properties of Fe-based thin film metallic glasses10.1016/j.jallcom.2015.07.256 ↗
2. High-temperature tribological property of Fe-based amorphous alloy coating10.1016/j.jnoncrysol.2021.121136 ↗
3. Wettability and corrosion performance of arc-sprayed Fe-based amorphous coatings10.1016/j.surfcoat.2022.128129 ↗
4. Corrosion resistance mechanisms of detonation sprayed Fe-based amorphous coating on AZ31B magnesium alloy10.1016/j.jnoncrysol.2021.121276 ↗
5. Study the effect of AT13 addition on the properties of AT13/Fe-based amorphous composite coatings10.1016/j.surfcoat.2019.125053 ↗
6. Characterization of microstructure and passive film difference of FeCrMoCB amorphous coatings affected by feedstock specific surface area10.1016/j.surfcoat.2023.129333 ↗
7. Laminar Fe-based amorphous composite coatings with enhanced bonding strength and impact resistance10.1016/j.actamat.2014.03.047 ↗
8. Soft spots and their structural signature in a metallic glass10.1073/pnas.1412095111 ↗
9. Medium-range order dictates local hardness in bulk metallic glasses10.1016/j.mattod.2020.10.032 ↗
10. The effect of grain orientation on nanoindentation behavior of model austenitic alloy Fe-20Cr-25Ni10.1016/j.actamat.2017.07.028 ↗
11. Strain distribution across an individual shear band in real and simulated metallic glasses10.1021/acs.nanolett.7b04816 ↗
12. Atomic-level processes of shear band nucleation in metallic glasses10.1103/PhysRevLett.119.195503 ↗
13. Rejuvenation of metallic glasses by non-affine thermal strain10.1038/nature14674 ↗
14. The brittleness of post-treatment of 3D printed Zr-based metallic glasses in supercooled liquid state10.1016/j.msea.2020.139259 ↗
15. Flaw-insensitive fracture of a micrometer-sized brittle metallic glass10.1016/j.actamat.2021.117219 ↗
16. Pronounced nanoindentation creep deformation in Cu-doped CoFe-based metallic glasses10.1016/j.jallcom.2019.07.226 ↗
17. Hardening of a metallic glass during cyclic loading in the elastic range10.1063/1.2919722 ↗
18. Makingmetallic glasses plastic by control of residual stress10.1038/nmat1758 ↗
19. Structural rejuvenation and relaxation of a metallic glass induced by ion irradiation10.1016/j.scriptamat.2020.01.023 ↗
20. Evolution of residual stress, free volume, and hardness in the laser shock peened Ti-based metallic glass10.1016/j.matdes.2016.09.017 ↗
21. Transient nucleation and microstructural design in flash-annealed bulk metallic glasses10.1016/j.actamat.2017.01.059 ↗
22. Nanoindentation creep behavior of diverse microstructures in a pre-strained interstitial high-entropy alloy by high-throughput mapping10.1016/j.msea.2022.143988 ↗
23. Multi-heterostructure and mechanical properties of N-doped FeMnCoCr high entropy alloy10.1016/j.ijplas.2021.102965 ↗
24. A review and progress of multiphase flows in atmospheric and low pressure plasma spray advanced coating
25. Nano oxides reinforced high-entropy alloy coatings synthesized by atmospheric plasma spraying10.1080/21663831.2019.1604443 ↗
26. Enhancement of impact resistance of Fe-based amorphous coating by Al2O3 dispersion10.1016/j.matlet.2016.02.060 ↗
27. Composite coating containing WC/12Co cermet and Fe-based metallic glass deposited by high-velocity oxygen fuel spraying10.1016/j.jallcom.2010.03.209 ↗
28. Wear behaviors of Fe-based amorphous composite coatings reinforced by Al2O3 particles in air and in NaCl solution10.1016/j.matdes.2015.08.142 ↗
29. Microstructure and properties of TiN/Fe-based amorphous composite coatings fabricated by reactive plasma spraying10.1016/j.jallcom.2019.01.171 ↗
30. Properties of Fe-based amorphous alloy coatings with Al2O3-13% TiO2 deposited by plasma spraying10.1016/S1875-5372(15)60004-2 ↗
31. Reinforced mechanical properties of plasma-sprayed Fe-based amorphous composite coatings by in-situ TiNx/TiOy10.1016/j.ceramint.2022.08.190 ↗
32. Characterization of gas tunnel type plasma sprayed TiN reinforced Fe-based metallic glass coatings10.1016/j.jallcom.2012.09.111 ↗
33. Role of length scale and temperature in indentation induced creep behavior of polymer derived Si–C–O ceramics10.1016/j.msea.2010.08.016 ↗
34. Anelastic and viscoplastic deformation in a Fe-based metallic glass10.1016/j.jallcom.2020.157233 ↗
35. Nanoindentation based properties of Inconel 718 at elevated temperatures: a comparison of conventional versus additively manufactured samples10.1016/j.ijplas.2019.04.018 ↗
36. Rate-dependent nanoindentation creep behavior of a Fe-based amorphous coating10.1016/j.jnoncrysol.2022.121668 ↗
37. Strain rate sensitivity of nanoindentation creep in an AlCoCrFeNi high-entropy alloy10.1007/s00339-016-0339-6 ↗
38. Nanoindentation creep behavior in a CoCrFeCuNi high-entropy alloy film with two different structure states10.1016/j.msea.2014.10.065 ↗
39. Ideal elastic, anelastic and viscoelastic deformation of a metallic glass10.1007/BF00540316 ↗
40. Room-temperature creep and structural relaxation of Mg–Cu–Y metallic glasses10.1016/j.actamat.2008.04.021 ↗
41. Structural analysis of rapidly solidified Mg–Cu–Y glasses during room-temperature embrittlement10.1080/14786430802603720 ↗
42. Manipulating internal flow units toward favorable plasticity in Zr-based bulk-metallic glasses by hydrogenation10.1016/j.jmst.2021.04.037 ↗
43. Defects activation in CoFe-based metallic glasses during creep deformation10.1016/j.jmst.2020.08.012 ↗
44. Nanoindentation creep behavior of electrodeposited Ni-P nanoglass films10.1016/j.intermet.2019.106480 ↗
45. Experimental characterization of shear transformation zones for plastic flow of bulk metallic glasses10.1073/pnas.0806051105 ↗
46. Criterion for plastic yielding of metallic glasses with a (T/Tg)^2/3 temperature dependence10.1103/PhysRevLett.95.195501 ↗
47. Role of thermal spikes in energetic displacement cascades10.1103/PhysRevLett.59.1930 ↗
48. Structural transformations and defect production in ion implanted silicon: a molecular dynamics simulation study10.1103/PhysRevLett.74.2507 ↗
49. Dynamics of viscoplastic deformation in amorphous solids10.1103/PhysRevE.57.7192 ↗
50. Activation energy of shear transformation zones: a key for understanding rheology of glasses and liquids10.1103/PhysRevLett.97.195501 ↗
51. Structural disordering in amorphous Pd40Ni40P20 induced by high temperature deformation10.1016/S1359-6454(98)00234-1 ↗
52. Nanoindentation study on the room temperature creep characteristics of a senary Ti 16.7 Zr 16.7 Hf 16.7 Cu 16.7 Ni 16.7 Be 16.7 high entropy bulk metallic glass10.1016/j.jnoncrysol.2017.04.041 ↗
53. Response of an amorphous/crystalline interface to nanoindentation: an atomistic study10.1016/j.apsusc.2021.149285 ↗
54. Multi-temperature indentation creep tests on nanotwinned copper10.1016/j.ijplas.2018.01.016 ↗
55. A critical appraisal of the extraction of creep parameters from nanoindentation data obtained at room temperature10.1016/j.actamat.2006.07.020 ↗
56. Indentation size effects on the strain rate sensitivity of nanocrystalline Ni?25at%Al thin films10.1016/j.scriptamat.2005.01.018 ↗
57. Microstructural effect on time-dependent plasticity of nanoporous gold10.1016/j.ijplas.2018.05.011 ↗
58. Microstructure and nanoindentation creep behavior of CoCrFeMnNi high-entropy alloy fabricated by selective laser melting
59. Nanoindentation creep behavior of an Al0.3CoCrFeNi high-entropy alloy10.1007/s11661-016-3469-8 ↗
60. Size-dependent creep of duralumin micro-pillars at room temperature10.1016/j.ijplas.2013.11.003 ↗
61. Strain rate sensitivity of the ultrastrong gradient nanocrystalline 316L stainless steel and its rate-dependent modeling at nanoscale10.1016/j.ijplas.2020.102696 ↗
62. Nanoindentation based properties of Inconel 718 at elevated temperatures: a comparison of conventional versus additively manufactured samples10.1016/j.ijplas.2019.04.018 ↗
63. Structural gradient of plastic Fe50Ni30P13C7 bulk metallic glass10.1016/j.jallcom.2019.02.208 ↗
64. Room temperature nanoindentation creep behavior of detonation sprayed Fe-based amorphous coating10.1016/j.intermet.2021.107426 ↗
65. Microscopic characterization of structural relaxation and cryogenic rejuvenation in metallic glasses10.1016/j.actamat.2018.10.036 ↗
66. Anelastic deformation processes in metallic glasses and activation energy spectrum model10.1016/S0921-5093(97)80088-3 ↗
67. Structural responses of metallic glasses under neutron irradiation10.1038/s41598-017-17099-2 ↗
68. Creation and annihilation of free volume during homogeneous flow of a metallic glass10.1063/1.1827344 ↗
69. Investigation of nanomechanical deformation behavior in plasma sprayed Fe-based amorphous/ nanocrystalline composite coating via multi-scale indentation and nanotribology10.1016/j.jnoncrysol.2020.120244 ↗
70. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗