Preparation and performance study of POE-g-MAH/GMA toughened bio-based PA56 alloys
Source abstract
Abstract
Maleic anhydride (MAH) and glycidyl methacrylate (GMA) dual monomer grafted POE (POE-g-MAH/GMA) toughened bio-based PA56 alloys were prepared by the physical co-blending modification method in a twin-screw extruder.The microscopic morphology, mechanical properties, flow properties, forming shrinkage properties and water absorption properties of the alloys were investigated.The results show that POE-g-MAH/GMA in each alloy is uniformly dispersed in the PA56 matrix in the form of regular spherical particles with a phase domain size of about 100–150 nm; When the mass fraction of POE-g-MAH/GMA is 25%, the notched impact strength of the alloy reaches 31 and 29 times that of pure PA56 at 23 °C and − 30 °C, respectively, which indicates that POE-g-MAH/GMA has a very obvious improvement on toughness of PA56. With the increase of POE-g-MAH/GMA mass fraction, the water absorption of the alloy samples assumes a decreasing trend, but the tensile strength, bending strength and melt flow rate reduce slightly, and the forming shrinkage of the alloy slightly increases. Comprehensive analysis shows that the alloy material has high added value and is suitable for the preparation of products with high toughness requirements.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Additive Manufacturing and 3D Printing Technologies · Orthopaedic implants and arthroplasty
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Synthesis and characterization of alternating copolyoxamide with high heat resistance and excellent crystallization property10.1016/j.polymer.2021.124385 ↗
2. Thermal and mechanical properties of flax char/carbon fiber reinforced polyamide 66 hybrid composites10.1002/pc.26394 ↗
3. Non-isothermal crystallization, yellowing resistance and mechanical properties of heat-resistant nylon 10t/66/titania dioxide/glass fibre composites10.1039/C8RA10037C ↗
4. Semiaromatic polyamides containing carboxyl unit: synthesis and properties10.1021/acs.iecr.7b01998 ↗
5. The polyamide market10.5604/12303666.1221737 ↗
6. Crystallization of polyamide 56/polyamide 66 blends: non‐isothermal crystallization kinetics10.1002/app.46409 ↗
7. Thermal degradation kinetics and pyrolysis products of bio-ased polyamide 56 fiber
8. Conductive nylon fabric through in situ synthesis of nano-silver: preparation and characterization10.1016/j.msec.2015.06.044 ↗
9. Study on the acid resistant properties of bio-based nylon 56 fiber compared with the fiber of nylon 6 and nylon 66
10. Challenges for China׳s energy conservation and emission reduction10.1016/j.enpol.2014.07.004 ↗
11. Two lamellar to fibrillar transitions in the tensile deformation of high-density polyethylene10.1021/ma100303d ↗
12. Preparation, properties of glass fiber reinforced nylon56 composites10.1002/pc.26982 ↗
13. The research on the production of bio-based polyamides 56 sheath-core composite modified fiber
14. Hydrogen bonding and crystalline structure of bio-based pa5610.1016/j.polymer.2021.124356 ↗
15. Study on the unsaturated hydrogen bond behavior of bio-based polyamide 5610.1515/epoly-2019-0004 ↗
16. Brill transition and melt crystallization of nylon 56: An odd–even polyamide with two hydrogen-bonding directions10.1016/j.polymer.2010.09.074 ↗
17. Non-isothermal crystallization kinetics of PA56/66 copolyamide
18. Mechanical properties, moisture absorption, and dyeability of polyamide 5, 6 fibers10.1080/00405000.2015.1020678 ↗
19. Progress in modifications and applications of biobased nylons
20. Phase morphology and mechanical properties of polyamide-6/polyolefin elastomer-g-maleic anhydride blends10.1080/00222348.2013.857536 ↗
21. Toughening and compatibilization of polyphenylene sulfide/nylon 66 blends with sebs and maleic anhydride grafted sebs triblock copolymers10.1002/app.26832 ↗
22. Compatibilization and toughening of poly (2, 6–dimethyl-1, 4–phenylene oxide)/polyamide 6 alloy with poly (ethylene 1–octene): mechanical properties, morphology, and rheology10.1002/app.11987 ↗
23. Rubber toughening of plastics: rubber particle cavitation and its consequences10.1002/masy.19961010130 ↗
24. Effects of miscibility on the morphology and microstructure and mechanical properties of PA66/POE blends
25. Research progress of lowering moisture absorption for nylon products
26. Impact behaviour of nylon-rubber blends: 4. Effect of the coupling agent, maleic anhydride10.1016/0032-3861(89)90384-4 ↗