Effect of oxygen vacancy on photoluminescence properties of Dy3+ doped K2BaCa(PO4)2 phosphor and remote luminescence multi-layer for white light
Source abstract
Abstract
Dy 3+ ions singly-doped phosphors, emerging as single-component white light-emitting phosphors, have been regarded as a promising candidate for white light generation under ultraviolet (UV) or near-ultraviolet (NUV) excitation. Here, a series of Dy 3+ doped K 2BaCa(PO 4) 2 phosphors with single phase was successfully synthesized by solid-state reaction method. Under NUV excitation, K 2BaCa(PO 4) 2: Dy 3+ phosphors exhibits the desire blue emission at 490 nm and yellow emission at 580 nm, attributed to the 4F 9/2 → 6H 15/2 and 4F 9/2 → 6H 13/2 transitions of Dy 3+ ions, respectively. Interestingly, the broad emission peak centered at 458 nm can also be found and assigned to the oxygen vacancy in K 2BaCa(PO 4) 2 host lattice. Significantly, the emission intensity of the phosphor is greatly enhanced to 4.1 times higher than that of the sample without oxygen vacancy due to the energy transfer from oxygen vacancy to Dy 3+ ions. K 2BaCa(PO 4) 2: 0.03Dy 3+ phosphor with high quantum yield of 76.9% exhibits good thermal stability with the relative emission intensity of 95.7% and 88.6% at 323 K and 373 K, respectively. Subsequently, the white light with correlated color temperature (CCT) of 4521 K and color rendering index (CRI) of 79 can be achieved for the optimized K 2BaCa(PO 4) 2: 0.03Dy 3+ phosphor packaged with NUV LED chip (365 nm). Further, the remote luminescence multi-layer based on K 2BaCa(PO 4) 2: 0.03Dy 3+ phosphors is fabricated on glass substrate by screen printing technology and exhibit better heat dissipation performance than that of the conventional NUV LEDs, which can be a promising candidate of single-component phosphors for the manufacture of white LEDs with adjustable remote luminescent layers.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Luminescence and Fluorescent Materials · Radiation Detection and Scintillator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Photoluminescence studies on Eu2+ and Ce3+-doped Li2SrSiO410.1016/j.jlumin.2008.05.021 ↗
2. Phosphors in phosphor-converted white light-emitting diodes: Recent advances in materials, techniques and properties10.1016/j.mser.2010.07.001 ↗
3. White-light emission from near UV InGaN-GaN LED chip precoated with blue/green/red phosphors10.1109/LPT.2002.805852 ↗
4. A noble gas sensor platform: linear dense assemblies of single-walled carbon nanotubes (LACNTs) in a multi-layered ceramic/metal electrode system (MLES)10.1039/C7TC03576D ↗
5. NUV chip based white LED using thermal stable Eu2+-activated phosphate and borate phosphor10.1016/j.matlet.2012.11.109 ↗
6. Facile fabrication of thermal stable Eu(HCOO)3 red-emitting crystals with high color purity for near-ultraviolet chip triggered white light-emitting diodes10.1016/j.jlumin.2019.05.043 ↗
7. Single phase cool white light emitting novel Ca9Al(PO4)7: Dy3+ nanophosphor under NUV excitation
8. A novel single-phase white light emitting phosphor Ca9La(PO4)5(SiO4)F2: Dy3+: synthesis, crystal structure and luminescence properties10.1039/C5RA23348H ↗
9. Synthesis and photoluminescence properties of a novel white-light-emitting Dy3+-activated Sr3Sc(PO4)3 phosphor
10. Bi4BPO10: Dy3+: a single-phase white-emitting phosphor for light-emitting diodes
11. Preparation and Luminescent Properties of SrLaAl3O7: Dy3+ White-light Phosphors
12. Warm white light generation from a single phase Dy3+ doped Mg2Al4Si5O18 phosphor for white UV-LEDs10.1039/C4CP00357H ↗
13. Eu2+ site preferences in the mixed cation K2BaCa(PO4)2 and thermally stable luminescence10.1021/jacs.8b06021 ↗
14. Dopant preferential site occupation and high efficiency white emission in K2BaCa(PO4)2: Eu2+, Mn2+ phosphors for high quality white LED applications10.1039/C9QI00138G ↗
15. An insight of luminescence properties of Bi3+-activated K2BaCa(PO4)2 phosphors10.1016/j.solidstatesciences.2019.04.001 ↗
16. K. Li, M. Shang, Y. Zhang, J. Fan, H. Lian, J. Lin, Photoluminescence properties of single-component white-emitting Ca9Bi(PO4)7: Ce3+, Tb3+, Mn2+ phosphors for UV LEDs, J. Mater. Chem. C. 3 (2015) 7096–7104. https://doi.org/10.1039/C5TC00927H.10.1039/C5TC00927H ↗
17. Near-UV light excited Eu3+, Tb3+, Bi3+ co-doped LaPO4 phosphors: synthesis and enhancement of red emission for WLEDs10.1016/j.ceramint.2014.12.128 ↗
18. Development of LED Package Heat Dissipation Research10.3390/mi13020229 ↗
19. Research on heat dissipation of multi-chip LED filament package10.3390/mi13010077 ↗
20. Ultraviolet excitation of remote phosphor with symmetrical illumination used in dual-sided liquid-crystal display10.1364/OL.35.002547 ↗
21. A remote phosphor film of silicate-poly (styrene-co-glycidyl methacrylate) composites for NUV chip-based white LED10.1016/j.jallcom.2017.09.104 ↗
22. Improved CCT uniformity of white LED using remote phosphor with patterned sapphire substrate10.1364/AO.52.007376 ↗
23. Fabrication of up-conversion phosphor films on flexible substrates using a nanostructured organo-silicon10.1166/jnn.2018.14944 ↗
24. Electrophoretic prepared ZnGa[sub 2]O[sub 4] phosphor film for FED10.1149/1.1610001 ↗
25. Ce3+ glass-ceramic phosphor by an organic-free screen-printing technique for high-power WLEDs10.1016/j.optmat.2020.110118 ↗
26. Tunable chromaticity and enhanced luminous efficacy of white LEDs with phosphor-in-glass coating via multilayer screen-printing10.1016/j.ceramint.2017.07.065 ↗
27. based on LuAG: Ce3+ PiG coated red-emitting K2SiF6: Mn4+ phosphor by screen-printing10.1016/j.optmat.2017.05.004 ↗
28. M8MgSc(PO4)7: xDy3+ (M = Ca/Sr) Single-Phase Full-Color Phosphor with High Thermal Emission Stability10.1021/acs.inorgchem.7b01268 ↗
29. K. Li, R. Van Deun, Color Tuning from Greenish-Yellow to Orange-Red in Thermal-Stable KBaY(MoO4)3: Dy3+, Eu3+ Phosphors via Energy Transfer for UV W-LEDs, ACS Appl. Electron. Mater. 2 (2020) 1735–1744. https://doi.org/10.1021/acsaelm.0c00307.10.1021/acsaelm.0c00307 ↗
30. Multiwavelength excited white-emitting Dy3+ doped Sr3Bi(PO4)3 phosphor10.1016/j.ceramint.2013.02.044 ↗
31. Ingredient regulation engineering of samarium (III)-activated double-perovskite niobate matrices10.1016/j.jallcom.2023.169326 ↗
32. Role of oxygen vacancy in rare-earth-free LiCa3Mg(VO4)3 phosphor: Enhancing photoluminescence by heat-treatment in oxygen flow10.1016/j.jmst.2020.11.039 ↗
33. J. Zhou, J. Zhong, J. Guo, H. Liang, Q. Su, Q. Tang, Y. Tao, F. Moretti, K. Lebbou, C. Dujardin, The Influence of Oxygen Vacancies on Luminescence Properties of Na3LuSi3O9: Ce3+, J. Phys. Chem. C. 120 (2016) 18741–18747. https://doi.org/10.1021/acs.jpcc.6b04964.10.1021/acs.jpcc.6b04964 ↗
34. Surface oxygen vacancies of ZnO: A facile fabrication method and their contribution to the photoluminescence10.1016/j.jallcom.2019.03.395 ↗
35. Design of K2SrCa(PO4)2−x(BO3)x: Eu2+ phosphors with full-visible spectrum by crystal structure modification10.1016/j.jlumin.2022.119273 ↗