A porous lithium metal anode with an artificial solid electrolyte interface fabricated by a facile process
Source abstract
Abstract
Lithium metal batteries (LMBs) have been considered a next-generation energy storage system. However, dendrite growth on lithium metal anode has critical issues with poor Coulombic efficiency and safety problems such as short-circuiting. Moreover, the continuous growth of dendrites leads to severe volume expansion of the electrode. To solve these problems, we suggest a lithium metal anode with a porous structure covered by artificial solid electrolyte interphase (SEI) layer. The porous lithium metal anode with the artificial SEI layer is prepared simply by dissolving lithium salt (lithium bis(fluorosulfonyl)imide, LiFSI) from a pellet of the mixture of lithium metal powder and lithium salt. In contrast to planar lithium metal foil, the porous structure decreases areal current density and reduces the possibility to form long dendrites penetrating the separator. Also, the artificial SEI layer with a porous structure induces uniform plating of lithium above and inside the lithium metal anode. As a result, the symmetric cells with the porous lithium metal anode show enhanced cycle life and rate capability compared to the anode prepared with bare lithium metal powder. Furthermore, the full cell assembled with the porous lithium metal anode and NCM811 cathode also shows significantly higher rate capability than the bare lithium metal anode. Our results provide a better understanding for designing a porous lithium metal anode with an inherent SEI layer for high-capacity and high-rate lithium metal batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
2. Template-free synthesis of SnO2 hollow nanostructures with high lithium storage capacity10.1002/adma.200600733 ↗
3. Morphology-controlled synthesis of SnO2 nanotubes by using 1D silica mesostructures as sacrificial templates and their applications in lithium-ion batteries10.1002/smll.200901815 ↗
4. Template synthesis of ordered-mesoporous tin oxide for lithium-ion battery anode materials10.5229/JKES.2014.17.2.86 ↗
5. New electrochemical energy storage systems based on metallic lithium anode—the research status, problems and challenges of lithium-sulfur, lithium-oxygen and all solid state batteries10.1007/s11426-017-9041-1 ↗
6. Towards high energy density lithium battery anodes: Silicon and lithium10.1039/C9SC01201J ↗
7. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
8. Nucleation and growth mechanism of lithium metal electroplating10.1021/jacs.9b10195 ↗
9. Electrolyte additive enabled fast charging and stable cycling lithium metal batteries10.1038/nenergy.2017.12 ↗
10. Spontaneously formation of SEI layers on lithium metal from LiFSI/DME and LiTFSI/DME electrolytes10.1016/j.apsusc.2020.147983 ↗
11. Fluoroethylene carbonate additives to render uniform Li deposits in lithium metal batteries
12. Dendrite-free, high-rate, long-life lithium metal batteries with a 3D cross-linked network polymer electrolyte10.1002/adma.201604460 ↗
13. Design principles for electrolytes and interfaces for stable lithium-metal batteries10.1038/nenergy.2016.114 ↗
14. Surface functionalization of a conventional polypropylene separator with an aluminum nitride layer toward ultrastable and high-rate lithium metal anodes10.1021/acsami.8b18660 ↗
15. A smart, anti-piercing and eliminating-dendrite lithium metal battery10.1016/j.nanoen.2018.04.078 ↗
16. Hierarchical chitin fibers with aligned nanofibrillar architectures: a nonwoven-mat separator for lithium metal batteries10.1021/acsnano.7b02085 ↗
17. Self-assembled, highly-lithiophilic and well-aligned biomass engineered MXene paper enables dendrite-free lithium metal anode in carbonate-based electrolyte10.1016/j.jechem.2022.01.024 ↗
18. Flexible and stable 3D lithium metal anodes based on self-standing MXene/COF frameworks for high-performance lithium-sulfur batteries10.1007/s12274-021-3433-9 ↗
19. Synergistic effect of modest pores and lithiophilic surface on 3D current collectors for stable Li metal anodes10.1016/j.jallcom.2022.164925 ↗
20. Vacuum distillation derived 3D porous current collector for stable lithium–metal batteries10.1016/j.nanoen.2018.03.036 ↗
21. Mechanical surface modification of lithium metal: Towards improved Li metal anode performance by directed Li plating10.1002/adfm.201402953 ↗
22. Lithium dendrite inhibition via 3D porous lithium metal anode accompanied by inherent SEI layer10.1016/j.ensm.2019.11.009 ↗
23. 3D stable hosts with controllable lithiophilic architectures for high-rate and high-capacity lithium metal anodes10.1016/j.jpowsour.2019.227214 ↗
24. In-situ formation of LiF-rich solid-electrolyte interphases on 3D lithiophilic skeleton for stable lithium metal anode10.1016/j.ensm.2022.12.003 ↗
25. In situ formation of a lithiophilic surface on 3D current collectors to regulate lithium nucleation and growth for dendrite-free lithium metal anodes10.1016/j.cej.2022.139903 ↗
26. Characteristics of a Li/MnO2 battery using a lithium powder anode at high-rate discharge10.1016/S0378-7753(02)00581-5 ↗
27. Scalable process for application of stabilized lithium metal powder in Li-ion batteries10.1016/j.jpowsour.2016.01.061 ↗
28. X-ray photoelectron spectroscopy: towards reliable binding energy referencing10.1016/j.pmatsci.2019.100591 ↗
29. XPS on Li-battery-related compounds: analysis of inorganic SEI phases and a methodology for charge correction10.1021/acsaem.8b00406 ↗
30. XPS analysis of oleylamine/oleic acid capped Fe 3 O 4 nanoparticles as a function of temperature10.1016/j.apsusc.2014.02.006 ↗
31. Thermal stability of oxidized ultrathin Li films on TZM for plasma facing components10.1016/j.jnucmat.2020.152587 ↗
32. Binding energy referencing for XPS in Alkali metal-based battery materials research (II): Application to complex composite electrodes10.3390/batteries4030036 ↗
33. Heterogeneity in the fluorescence of graphene and graphene oxide quantum dots10.1007/s00604-017-2075-9 ↗
34. Identifying the positive role of lithium hydride in stabilizing Li metal anodes10.1126/sciadv.abl8245 ↗
35. Recent progress in LiF materials for safe lithium metal anode of rechargeable batteries: is LiF the key to commercializing Li metal batteries?10.1016/j.ceramint.2018.09.287 ↗
36. Electrochemical evaluation of lithium-metal anode in highly concentrated ethylene carbonate based electrolytes
37. A new ether-based electrolyte for dendrite-free lithium-metal based rechargeable batteries
38. In situ formation of a stable interface in solid-state batteries10.1021/acsenergylett.9b00857 ↗
39. Vertically aligned carbon nanotubular structure for guiding uniform lithium deposition via capillary pressure as stable metallic lithium anodes10.1016/j.ensm.2019.06.016 ↗
40. Comparative study of imide-based Li salts as electrolyte additives for Li-ion batteries10.1016/j.jpowsour.2017.11.045 ↗
41. Localized high-concentration sulfone electrolytes for high-efficiency lithium-metal batteries10.1016/j.chempr.2018.05.002 ↗
42. Recent progress on lithium anode protection for lithium–sulfur batteries: review and perspective10.1063/5.0107648 ↗
43. Sulfurized solid electrolyte interphases with a rapid Li+ diffusion on dendrite-free Li metal anodes10.1016/j.ensm.2017.03.008 ↗
44. Suppression of dendritic lithium growth by in situ formation of a chemically stable and mechanically strong solid electrolyte interphase10.1021/acsami.7b14662 ↗
45. Stable Li metal anode with protected interface for high-performance Li metal batteries10.1016/j.ensm.2018.04.030 ↗
46. A review on the deposition/dissolution of lithium metal anodes through analyzing overpotential behaviors
47. Stable Li metal anode with protected interface for high-performance Li metal batteries10.1016/j.ensm.2018.04.030 ↗
48. Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes10.1038/nnano.2016.32 ↗
49. Enhanced stability of lithium metal anode by using a 3D porous nickel substrate10.1002/celc.201701250 ↗
50. Effect of LiFSI concentrations to form thickness- and modulus-controlled SEI layers on lithium metal anodes10.1021/acs.jpcc.8b02314 ↗