journal article·2023-10

Effect of pre-fatigue damage on the residual strength of 2198-T8 aluminum-lithium alloy sheet with holes

Yajun Chen, Yiding Zhang, Xuechun Pan, Jinchuan Yang, Tong Chang

Publisher page

Abstract

The 2198-T8 aluminum-lithium alloy is the advanced aircraft aluminum-lithium alloy used for airframe construction. During the service of the aircraft, the rivet joints of the fuselage skin are vulnerable to fatigue damage, which is accompanied by the formation of fatigue cracks near the rivet holes. The influences of pre-fatigue damage on the residual strength of 2198-T8 aluminum-lithium alloy with rivet holes were studied by combining the digital image correlation (DIC) technique and the micro and macro fracture morphology. The results show that with the increase of the pre-fatigue loading ratio, the residual strength and residual strain of 2198-T8 aluminum-lithium alloy gradually decrease, and when the pre-fatigue loading ratio is greater than 90 %, the attenuation trend is sharply accelerated. The relationship between residual strength and residual strain satisfies the residual strength degradation model, and the formula has a goodness of fit of 0.9878. The fatigue cracks at the hole edge propagate in both vertical and horizontal directions, and the propagation rate increases with the increase of the pre-fatigue loading ratio, and the fatigue striations gradually widen.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Welding Techniques and Residual Stresses · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Origin of unusual fracture in stirred zone for friction stir welded 2198-T8 Al-Li alloy joints10.1016/j.msea.2017.03.079 ↗
2. Microstructural evolution and mechanical behavior of friction spot welded 2198-T8 Al-Li alloy during aging treatment10.1016/j.matdes.2016.11.045 ↗
3. Fatigue behavior of the aeronautical Al-Li (2198) aluminum alloy under constant amplitude loading10.1016/j.ijfatigue.2013.07.009 ↗
4. Influence of foreign object impact mode on fatigue performance of 2198-T8 Al-Li alloy thin sheets for fuselage10.1111/ffe.13338 ↗
5. Method to analyse multiple site damage fatigue before and after crack coalescence10.1016/j.engfracmech.2017.09.011 ↗
6. Effects of hole reaming on fatigue performance of thin sheets for fuselage: DIC and FEM analysis10.1016/j.ijfatigue.2020.105893 ↗
7. Strength distribution of fatigue crack initiation sites in an Al-Li alloy10.1007/s11661-006-0194-8 ↗
8. XFEM based analysis of fatigue crack growth in damaged wing-fuselage attachment lug10.1016/j.engfailanal.2020.104516 ↗
9. Discrete crack growth analysis methodology for through cracks in pressurized fuselage structures10.1002/nme.1620381003 ↗
10. Multiple-site damage in aircraft fuselage structures10.1111/j.1460-2695.1995.tb00879.x ↗
11. Mechanical properties and fatigue crack growth rates in friction stir welded nugget of 2198-T8 Al-Li alloy joints10.1016/j.msea.2013.01.044 ↗
12. Anisotropy and size effect in tensile mechanical properties of Al-Cu-Li 2198 alloy10.1016/j.prostr.2017.07.052 ↗
13. Study on life and path of fatigue cracks in multiple site damage plates10.1016/j.ijfatigue.2015.07.017 ↗
14. Characterization of high cycle fatigue behavior of a new generation aluminum lithium alloy10.1016/j.actamat.2011.06.003 ↗
15. Micro-crack initiation and propagation in a high strength aluminum alloy during very high cycle fatigue10.1016/j.msea.2018.01.008 ↗
16. Boundary element simulation of fatigue crack growth in multi-site damage10.1016/j.enganabound.2014.03.002 ↗
17. A modified residual strength prediction method for aluminum alloy plates with MSD10.1016/j.mechrescom.2020.103584 ↗
18. Residual strength prediction of impacted CFRP laminates10.1177/002199838401800601 ↗
19. Predicting the residual strength and deformability of corroded steel plate based on the corrosion morphology10.1016/j.conbuildmat.2017.07.035 ↗
20. Stress intensity factor for multiple cracks on curved panels10.1016/j.prostr.2018.12.078 ↗
21. Effect of hygrothermal-mechanical exposure on the residual strength of adhesively bonded joints10.1016/j.ijadhadh.2020.102616 ↗
22. Analysis of corrosion behavior and residual strength of lightweight 2060-T8 Al-Li alloy
23. Analysis of aluminum sheets with multiple sites damage based on fatigue tests and DIC technique10.1016/j.ijfatigue.2017.12.008 ↗
24. Investigation of fatigue crack propagation mechanisms of branching crack in 2324-T39 aluminum alloy thin plates under cyclic loading spectrum10.1016/j.ijfatigue.2015.09.017 ↗
25. Measured surface deformation and strains in thin thermoplastic prepreg tapes steered along curved paths without adhesion using StereoDIC10.1007/s11340-019-00478-3 ↗
26. Microcrack initiation behavior around film cooling holes in a Ni-based single crystal: In situ observation and crystal plastic analysis10.1016/j.msea.2019.138609 ↗
27. The fatigue limit prediction of notched components–a critical review and modified stress gradient based approach
28. Fatigue crack propagation in aluminum-lithium alloy 2090: Part I. long crack behavior10.1007/BF02649269 ↗
29. The effect of stress concentration and material structure on the kinetics of damage accumulation10.1016/j.prostr.2020.01.146 ↗
30. Fatigue damage model of stone matrix asphalt with polymer modified binder based on tensile strain evolution and residual strength degradation using digital image correlation methods10.1016/j.measurement.2018.03.037 ↗