Microstructural evolution and tensile property of gradient microstructure CoCrFeMnNi high-entropy alloy induced by pre-torsion
Source abstract
Abstract
Gradient-structure was obtained in CoCrFeMnNi high-entropy alloys utilizing both the forward pre-torsion and forward-reverse pre-torsion preparation technique. The slope between hardness and r/R is high corresponding to increase in the pre-torsion angles attributable to the gradient structure after pre-torsion processing. Under 2% tensile strain, the change of dislocation and twin morphology takes place as pre-torsion angle increases, i.e., from discrete dislocations, to dislocation tangles and to dislocation cells, and from single twins to secondary twins. According to tensile test results, yield strength of samples increases but fracture strain linearly decreases with increasing pre-torsion angles as: Yield s trengt h = 905.47 − 11.67 elongation . Yield strength of FRPTed specimens is slightly higher than that of FPTed specimens under the same pre-torsion angles with the maximum increment of 56 MPa. Strength mechanism indicates that the improvement of yield strength of the HEAs is mainly attributed to gradient dislocation and twin strengthening. In addition, a strength predictive model, which takes gradient dislocation and twin strengthening into consideration, is proposed, and predictive yield strength match well with the experimental data of FPTed- and FRPTed- samples.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Nanostructured high‐entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. High-entropy alloys–a new era of exploitation
3. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
4. Microstructural origins of high strength and high ductility in an AlCoCrFeNi2. 1 eutectic high-entropy alloy10.1016/j.actamat.2017.07.041 ↗
5. Evolution of phase constitution with mechanical alloying and spark plasma sintering of nanocrystalline Al x CoCrFeNi (x= 0, 0.3, 0.6, 1 mol) high-entropy alloys10.1557/s43578-021-00483-0 ↗
6. AlxCoCrFeNiSi high entropy alloy coatings with high microhardness and improved wear resistance10.1016/j.surfcoat.2020.126328 ↗
7. Microstructure, phase stability, and oxidation resistance of (FeCoNi) 60Al15Cr25− xTix high-entropy alloys10.1016/j.jallcom.2021.159320 ↗
8. Outstanding radiation resistance of tungsten-based high-entropy alloys10.1126/sciadv.aav2002 ↗
9. Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys, Nat. Rev. Mater.
10. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
11. Gradient cell–structured high-entropy alloy with exceptional strength and ductility10.1126/science.abj8114 ↗
12. Dual gradient microstructure to simultaneously improve strength and electrical conductivity of aluminum wire10.1016/j.msea.2020.139308 ↗
13. Improved fatigue resistance of gradient nanograined Cu10.1016/j.actamat.2018.12.018 ↗
14. Effect of gradient microstructure on the strength and ductility of medium-entropy alloy processed by severe torsion deformation10.1016/j.msea.2020.140429 ↗
15. Evading the strength–ductility trade-off dilemma in steel through gradient hierarchical nanotwins10.1038/ncomms4580 ↗
16. Multiple gradient structures driving higher tensile strength and good capacity to absorbed energy in aluminum wire processed by cryogenic pre-torsion10.1016/j.scriptamat.2021.114436 ↗
17. Optimizing mechanical properties of gradient-structured low-carbon steel by manipulating grain size distribution10.1016/j.msea.2018.11.042 ↗
18. Effect of gradient microstructure induced by pre-torsion on hydrogen embrittlement of pure iron10.1016/j.corsci.2021.109821 ↗
19. Hydrogen embrittlement of CoCrFeMnNi high-entropy alloy compared with 304 and IN718 alloys10.3390/met12060998 ↗
20. Simultaneously enhancing strength and ductility of a high-entropy alloy via gradient hierarchical microstructures10.1016/j.ijplas.2019.07.017 ↗
21. Designing structures with combined gradients of grain size and precipitation in high entropy alloys for simultaneous improvement of strength and ductility10.1016/j.actamat.2022.117847 ↗
22. Achieving a unique combination of strength and ductility in CrCoNi medium-entropy alloy via heterogeneous gradient structure10.1007/s10853-020-04870-6 ↗
23. The effect of carbon on the microstructures, mechanical properties, and deformation mechanisms of thermo-mechanically treated Fe40. 4Ni11. 3Mn34. 8Al7. 5Cr6 high entropy alloys10.1016/j.actamat.2016.12.074 ↗
24. Nano-twin mediated plasticity in carbon-containing FeNiCoCrMn high entropy alloys10.1016/j.jallcom.2015.05.224 ↗
25. Fracture resistance of high entropy alloys: a review10.1016/j.intermet.2018.05.013 ↗
26. Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0. 3CoCrFeNi high entropy alloy10.1016/j.matdes.2017.02.072 ↗
27. The cleavage strength of polycrystals
28. E. Hall, 1951. The deformation and ageing of mild steel: III discussion of results, Proceedings of the Physical Society. Section B 64(9) (1951) 747.10.1088/0370-1301/64/9/303 ↗
29. G.I. Taylor, 1934. The mechanism of plastic deformation of crystals. Part I.—Theoretical, Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character 145(855) (1934) 362–387.10.1098/rspa.1934.0106 ↗
30. Revisiting the role of prestrain history in the mechanical properties of ultrafine-grained CoCrFeMnNi high-entropy alloy10.1016/j.msea.2020.140398 ↗
31. Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization10.1016/S1359-6454(01)00233-6 ↗
32. Constitutive modeling of deformation behavior of high-entropy alloys with face-centered cubic crystal structure10.1080/21663831.2017.1292325 ↗
33. A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature10.1016/j.jallcom.2020.153981 ↗
34. Evolution of dislocation densities and the critical conditions for the Portevin-Le Chatelier effect10.1016/0956-7151(90)90021-8 ↗
35. A unified phenomenological description of work hardening and creep based on one-parameter models10.1016/0001-6160(84)90202-5 ↗
36. Dislocation and twin substructure evolution during strain hardening of an Fe–22 wt% Mn–0.6 wt% C TWIP steel observed by electron channeling contrast imaging10.1016/j.actamat.2011.07.009 ↗
37. Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy10.1016/j.actamat.2018.10.017 ↗
38. The respective influence of microstructural and thermal softening on adiabatic shear localization10.1016/j.mechmat.2012.09.008 ↗
39. Microstructural effects on adiabatic shear band formation10.1016/j.scriptamat.2011.09.014 ↗