journal article·2023-07

Laser shock dynamic compaction of tungsten carbide reinforced-aluminum matrix (WCp/Al) composites

Tao Wang, Huixia Liu, Zhen Dong, Youjuan Ma, Wenxiang Sun, Maomao Cui, Xiao Wang

Publisher page

Abstract

Laser impact can generate high-strain impact loads. On this basis, a laser impact dynamic compaction (DC) of the tungsten carbide particles (WCp)/Al composite powder with large differences in stiffness and plasticity was performed in this study. Then, the influences of laser energy and WCp content on relative density (actual density/theoretical density), mechanical properties, and microstructure of the pressed billet surface, damage surface, and cross section of the Al matrix composites (WCp/Al) were analyzed. Along with the analysis of the high-strain compaction process, the spread of shock wave process in the compacted billets and the densification behavior of the powder compacts were evaluated via 2D multiparticle finite element method (MPFEM). Results showed that relative density of the compacted billets tended to increase and then decrease with the rise in of WCp content (5%, 10%, 15%, and 20%). In the DC of the composite powder by the laser impact, the pore filling was mainly filled by plastic deformation of the relatively soft Al particles, and the hard WCp did not undergo plastic deformation due to its high strength. A composite powder compact with high relative density was successfully prepared with a WCp content of 10% at 1800 mJ of laser energy. The eventual relative density reached 97.72%, and the overall microhardness increased by approximately 23.25%. The 2D MPFEM simulations could sufficiently predict the dynamic mechanical response in the DC by the laser impact and depict the strain and stress variation patterns at the particle-scale level. Finally, the densification mechanism of the composite powder billets was investigated. The simulation results pertaining to the relationship between the final laser energy and relative density were in significant agreement with the experimental results.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Titanium–hydroxyapatite composite biomaterial for dental implants10.1179/174329006X94591 ↗
2. Shock wave compaction and sintering of mechanically alloyed CoCrFeMnNi high-entropy alloy powders10.1016/j.msea.2017.09.132 ↗
3. High velocity compaction of 0.9Al2O3/Cu composite powder10.1016/j.matdes.2013.12.059 ↗
4. Effects of warm die on high velocity compaction behaviour and mechanical properties of iron based PM alloy10.1179/1743290115Y.0000000019 ↗
5. Compaction of Ti–6Al–4V powder using high velocity compaction technique10.1016/j.matdes.2013.03.003 ↗
6. Influence of particle size on property of Ti–6Al–4V alloy prepared by high-velocity compaction10.1016/S1003-6326(13)62470-X ↗
7. Experimental and 3D MPFEM simulation study on the green density of Ti–6Al–4V powder compact during uniaxial high velocity compaction10.1016/j.jallcom.2019.153226 ↗
8. High velocity compaction: comparison with conventional compaction for new press development in hot cell pellet manufacturing10.1016/j.proche.2012.10.067 ↗
9. Effect of multiple impacts on high velocity pressed iron powder10.1016/j.powtec.2009.05.028 ↗
10. Dynamic behavior of selected ceramic powders10.1016/j.ijimpeng.2005.04.012 ↗
11. A comparative study on hot dynamic compaction and quasi-static hot pressing of Al7075/SiCnp nanocomposite10.1016/j.apt.2014.08.007 ↗
12. Effect of discharge energy of magnetic pulse compaction on the powder compaction characteristics and spring back behavior of copper compacts10.1007/s12540-020-00698-6 ↗
13. Microstructure and mechanical properties of Ti6Al4V powder compacts prepared by magnetic pulse compaction10.1016/S1003-6326(09)60177-1 ↗
14. Bonding mechanism of explosive compaction–welding sintering10.1016/j.jmapro.2019.08.018 ↗
15. Explosive compaction of Al2O3 nanopowders10.1016/j.ceramint.2016.02.066 ↗
16. Dynamic compaction of titanium powder by vaporizing foil actuator assisted shearing10.1016/j.powtec.2014.01.019 ↗
17. Mechanical and microstructural characterization of Al7075/SiC nanocomposites fabricated by dynamic compaction10.1007/s12613-014-0908-7 ↗
18. Study on mechanical characteristics, microstructure and equation of copper powder compaction based on electromagnetic compaction10.1016/j.matchemphys.2020.123449 ↗
19. Effect of aspect ratio on the compaction characteristics and micromorphology of copper powders by magnetic pulse compaction10.1016/j.apt.2020.09.010 ↗
20. Crystallographic and morphological characteristics of explosively compacted copper under various detonation velocities10.1080/14786435.2012.669057 ↗
21. Dynamic compaction of pure copper powder using pulsed magnetic force10.1016/S1006-7191(07)60039-8 ↗
22. Laser shock dynamic compaction of aluminum powder10.1016/j.jmapro.2022.03.056 ↗
23. Aluminum matrix composites for industrial use: advances and trends10.1016/j.promfg.2016.12.045 ↗
24. Effect of mixing method and particle size on hardness and compressive strength of aluminium based metal matrix composite prepared through powder metallurgy route10.1016/j.jmrt.2022.02.094 ↗
25. Analysis of the stress states and interface damage in a particle reinforced composite based on a micromodel using cohesive elements10.1016/j.msea.2013.09.097 ↗
26. A density-dependent modified Drucker-Prager Cap model for die compaction of Ag57.6-Cu22.4-Sn10-In10 mixed metal powders10.1016/j.powtec.2016.09.061 ↗
27. Packing of cylindrical particles: DEM simulations and experimental measurements10.1016/j.powtec.2017.03.058 ↗
28. DEM dynamic simulation of tetrahedral particle packing under 3D mechanical vibration10.1016/j.powtec.2017.04.048 ↗
29. A numerical analysis of cold powder compaction based on micromechanical experiments10.1016/j.powtec.2013.03.040 ↗
30. Study of the cold compaction of composite powders by the discrete element method10.1016/S1359-6454(02)00402-0 ↗
31. Isostatic compaction of bimodal powder mixtures and composites10.1016/j.ijmecsci.2004.05.012 ↗
32. Cold compaction of composite powders with size ratio10.1016/j.actamat.2003.12.026 ↗
33. Study of cold powder compaction by using the discrete element method10.1016/j.powtec.2010.08.056 ↗
34. A study of compaction of composite particles by multi-particle finite element method10.1016/j.compscitech.2008.11.020 ↗
35. Numerical modeling of cold powder compaction using multi particle and continuum media approaches10.1016/j.powtec.2014.11.008 ↗
36. The study of relations between loading history and yield surfaces in powder materials using discrete finite element simulations
37. Simulation of multi-axial compaction of granular media from loose to high relative densities10.1016/j.jmps.2005.02.007 ↗
38. Modeling of high-density compaction of granular materials by the Discrete element method10.1016/j.ijsolstr.2009.05.008 ↗
39. Microscopic approach of powder compaction using fnite element method10.1016/S0020-7403(02)00002-4 ↗
40. Three-dimensional multiparticle finite element simulation of dynamic compaction of copper powder by laser shock10.1016/j.powtec.2022.117916 ↗
41. MPFEM simulation of compaction densification behavior of Fe-Al composite powders with different size ratios10.1016/j.jallcom.2018.01.198 ↗
42. The impact of mesh adaptivity on the gravity current front speed in a two-dimensional lock-exchange10.1016/j.ocemod.2011.01.003 ↗
43. Finite element analysis of three dimensional crack growth by the use of a boundary element sub model10.1016/j.engfracmech.2009.03.007 ↗
44. Physical study of laser‐produced plasma in confined geometry10.1063/1.346783 ↗
45. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures
46. Processing and properties of particulate reinforced steel matrix composites10.1016/S0921-5093(97)00710-7 ↗
47. Tribological properties of Al7075-SiC nanocomposite prepared by hot dynamic compaction10.1080/09276440.2015.1055955 ↗
48. An overview of dynamic compaction in powder metallurgy10.1179/174328008X309690 ↗
49. The lower limit of explosive welding parameter window for bimetal