journal article·2023-07

Applying wash coating techniques for swelling-induced stress reduction and thermal improvement in metal hydrides

J. Warfsmann, J.A. Puszkiel, M. Passing, P.S. Krause, E. Wienken, K. Taube, T. Klassen, C. Pistidda, J. Jepsen

Publisher page

Abstract

The storage of hydrogen in metal alloys as an alternative to hydrogen storage in pressurized or liquid form has the advantage of high volumetric storage capacity and less complex storage systems due to lower pressure and moderate temperature conditions. The later leads to an improved safety and reduced cost of the storage vessel. However, when considering their utilization in hydrogen storage tanks, swelling-induced stress and heat management are challenges that still require to be addressed. Several strategies have been published in the past to address these problems, however it can be challenging to scale them up. In this work, we propose an easily scalable approach to overcome these drawbacks. The commercially available AB 2 room-temperature metal alloy Hydralloy C5 was modified by applying a wash coating-like methodology. The surface of the metal alloy was coated with a mixture of a conductive material like expanded natural graphite (ENG) or aluminum and the elastomeric ethylene-vinyl acetate copolymer (EVA). The performance of this modified metal alloy was investigated by in situ measurement of hydrogen capacity, heat dissipation and swelling-induced stress during 50 hydrogenation/dehydrogenation cycles. The coated metal alloy maintained a satisfactory hydrogen capacity with slightly improved heat dissipation. The swelling-induced stress behavior of the treated material was greatly improved. Especially the addition of a mixture of 10 wt% ENG and 10 wt% EVA allowed to completely compensate for the swelling-induced stress during hydrogenation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Hybrid Renewable Energy Systems · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Energy supply, its demand and security issues for developed and emerging economies10.1016/j.rser.2005.12.004 ↗
2. McNeill · 2001
3. Enerdata, 2022. Global Energy and Climate Trends 2022 Edition, 2022.
4. High dimensional dependence in power systems: A review10.1016/j.rser.2018.05.056 ↗
5. Electricity in Europe: exiting fossil fuels?10.1093/oxrep/grw003 ↗
6. Grid Integration of renewable energy: flexibility, innovation, and experience10.1146/annurev-environ-110615-085725 ↗
7. A survey of smart grid architectures, applications, benefits and standardization10.1016/j.jnca.2016.10.003 ↗
8. Recent advances of energy storage technologies for grid: a comprehensive review10.1002/est2.322 ↗
9. Hydrogen energy as future of sustainable mobility10.3389/fenrg.2022.893475 ↗
10. Hydrogen energy systems: a critical review of technologies, applications, trends and challenges10.1016/j.rser.2021.111180 ↗
11. A novel emergency gas-to-power system based on an efficient and long-lasting solid-state hydride storage system: modeling and experimental validation10.3390/en15030844 ↗
12. Hydrogen nexus in a sustainable energy future10.1039/b810104n ↗
13. Clean hydrogen and ammonia synthesis in paraguay from the Itaipu 14 GW hydroelectric plant10.3390/chemengineering3040087 ↗
14. Safety of hydrogen storage and transportation: an overview on mechanisms, techniques, and challenges10.1016/j.egyr.2022.04.067 ↗
15. Nanoconfinement of lithium alanate for hydrogen storage10.1016/j.jallcom.2022.166834 ↗
16. Hydrogen storage in complex metal hydrides NaBH4: hydrolysis reaction and experimental strategies10.3390/catal12040356 ↗
17. Metallurgical processing of Mg alloys and MgH2 for hydrogen storage10.1016/j.jallcom.2021.162798 ↗
18. Metal hydride hydrogen compressors: a review10.1016/j.ijhydene.2014.01.158 ↗
19. Experimental investigation of the swelling/shrinkage of a hydride bed in a cell during hydrogen absorption/desorption cycles10.1016/j.ijhydene.2012.07.091 ↗
20. Hydride breathing and its consequence on stresses applied to containers: a review10.1016/j.ijhydene.2021.07.082 ↗
21. An improved H2-Gas pressure operated LaNi5 Powder-Dispersed Polyurethane/Titanium 2-Layer actuator with reversible giant and rapid expansion by hydrogenation10.2320/matertrans.M2017212 ↗
22. The stress developed on the side wall of the pressure vessel for the packed bed of the hydrogen storage alloy and the change in the packing state10.3775/jie.100.5 ↗
23. The hydriding–dehydriding characteristics of La0.6Y0.4Ni4.8Mn0.2 and their influences in the surface strain on small-scale, thin-wall and vertical containers10.1016/j.matdes.2008.04.024 ↗
24. Effect of diffusion coefficient variation on interrelation between hydrogen diffusion and induced internal stress in hydrogen storage alloys10.1016/j.jallcom.2016.08.288 ↗
25. Stress reduction in a hydride container by the addition of a glidant agent10.1016/j.ijhydene.2020.07.020 ↗
26. Effect of silicone oil additive on swelling stress alleviation in the metal hydride reactor10.1016/j.ijhydene.2022.01.114 ↗
27. Development of large MH tank system for renewable energy storage10.1016/j.ijhydene.2017.06.048 ↗
28. Reactive hydride composite confined in a polymer matrix: new insights into the desorption and absorption of hydrogen in a storage material with high cycling stability
29. Mechanical stresses originating from metal hydride composites during cyclic hydrogenation10.1016/j.ijhydene.2015.06.053 ↗
30. Comparative analysis of the efficiencies of hydrogen storage systems utilising solid state H storage materials10.1016/j.jallcom.2014.12.107 ↗
31. Hydrogen storage technologies for stationary and mobile applications: review, analysis and perspectives10.1016/j.rser.2021.111311 ↗
32. Research and development of hydrogen carrier based solutions for hydrogen compression and storage10.1088/2516-1083/ac7cb7 ↗
33. Application of hydrides in hydrogen storage and compression10.1016/j.ijhydene.2019.01.104 ↗
34. Development of a two-stage metal hydride system as topping cycle in cascading sorption systems for cold generation10.1016/S1359-4311(01)00115-6 ↗
35. Optimization of internal heat exchangers for hydrogen storage tanks utilizing metal hydrides10.1016/j.ijhydene.2011.07.044 ↗
36. Performance analysis of cylindrical metal hydride beds with various heat exchange options10.1016/j.jallcom.2014.12.272 ↗
37. Dynamic model and experimental results of a thermally driven metal hydride cooling system10.1016/j.ijhydene.2009.01.085 ↗
38. A tool for modelling the breathing of hydride powder in its container while cyclically absorbing and desorbing hydrogen10.1016/j.ijhydene.2014.11.077 ↗
39. Preparation and properties of hydrogen storage alloy-copper microcapsules10.1016/0022-5088(85)90246-2 ↗
40. Metal hydride compacts of improved thermal conductivity10.1016/S0360-3199(00)00115-4 ↗
41. Enhancement of hydrogen sorption in magnesium hydride using expanded natural graphite10.1016/j.ijhydene.2009.07.112 ↗
42. Stress on a reaction vessel by the swelling of a hydrogen absorbing alloy10.1016/S0925-8388(97)00246-6 ↗
43. Stress development of metal hydride composites for high density hydrogen storage applications10.1016/j.jallcom.2017.02.113 ↗
44. Long-term cycle stability of metal hydride-graphite composites10.1016/j.ijhydene.2015.09.013 ↗
45. Hydrogen-based systems for integration of renewable energy in power systems: achievements and perspectives10.1016/j.ijhydene.2021.06.218 ↗
46. An effective activation method for industrially produced TiFeMn powder for hydrogen storage10.1016/j.jallcom.2022.165847 ↗
47. Thermal conductivity of ethylene-vinyl acetate copolymers with different vinyl acetate contents dependent on temperature and crystallinity10.1016/j.tca.2021.179141 ↗
48. Concept, design and manufacture of a prototype hydrogen storage tank based on sodium alanate10.1002/ceat.200900095 ↗
49. G.A. Lozano Martinez, 2010. Development of hydrogen storage systems using sodium alanate. PhD-Thesis, TUHH Hamburg, 2010.
50. W.M. Haynes, CRC Handbook of Chemistry and Physics, 96th Edition, CRC Press.
51. Pierson · 1993
52. Effects of cyclic hydriding–dehydriding reactions of LaNi5 on the thin-wall deformation of metal hydride storage vessels with various configurations10.1016/j.renene.2012.05.024 ↗
53. Investigations on graphene platelets as dry lubricant and as grease additive for sliding contacts and rolling bearing application10.3390/lubricants8010003 ↗
54. Fundamentals and recent advances in polymer composites with hydride-forming metals for hydrogen storage applications10.1016/j.ijhydene.2022.08.004 ↗
55. Hydration characteristics of metal hydride fixed in resin form10.1252/jcej.25.1 ↗
56. AB5/ABS composite material for hydrogen storage10.1016/j.ijhydene.2008.10.013 ↗
57. 2019