journal article·2023-06

Deformation and damage mechanisms during stress rupture of Waspaloy after vacuum solution plus aging treatment

Hongliang Liu, Xin Zhao, Xiao Liu, Jinjuan Lv, Lei Zheng

Publisher page

Abstract

The microstructure of vacuum solution-treated Waspaloy is investigated before and after a stress rupture test. The samples with trimodal and bimodal distributions of γ′ precipitates are produced by single-stage (760 °C/16 h) and standard two-stage (845 °C/4 h + 760 °C/16 h) aging treatments, respectively. Both kinds of samples deform mainly by the propagation of dislocations in the uniformly deformed region and then by a combination of dislocation slip and deformation twinning in the necked region. The secondary and tertiary γ′ precipitates are sheared by a/2 < 110 > dislocations, while stacking faults are created in the primary γ′ precipitates by shearing of a/3 < 112 > dislocations. The finer tertiary γ′ precipitates can more effectively impede the movement of dislocations than the secondary γ′ precipitates. Thus, the single-stage aged sample exhibits a longer stress rupture life and lower strain rate than the two-stage aged sample. For the damage mechanism, the fracture in the uniform deformation stage is generally intergranular given that the deformation is mainly concentrated around the grain boundaries. A mixed mode of transgranular and intergranular fracture occurs in the necked region due to the obvious grain boundary sliding and serious deformation within the grains.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. The role of composition on the extent of individual strengthening mechanisms in polycrystalline Ni-based superalloys
2. Microstructure evolution dependence of work-hardening characteristic in cold deformation of a difficult-to-deform nickel-based superalloy10.1016/j.msea.2020.140280 ↗
3. Coarsening and dissolution of γ′ precipitates during solution treatment of AD730™ Ni-based superalloy: mechanisms and kinetics models10.1016/j.jallcom.2015.11.002 ↗
4. Dissolution behavior of intragranular M23C6 carbide in 617B Ni-base superalloy during long-term aging10.1016/j.jallcom.2019.01.389 ↗
5. Influence of microstructure on local intra-and intergranular deformations during creep of a nickel-based superalloy at 700 °C10.1016/j.msea.2013.09.015 ↗
6. High-temperature tensile and creep behaviour of Inconel 625 superalloy sheet and its associated deformation-failure micromechanisms10.1016/j.msea.2021.142152 ↗
7. Effective solution treatment can result in improved creep performance of superalloys10.1016/j.jallcom.2018.08.089 ↗
8. Creep mechanisms of U720Li disc superalloy at intermediate temperature10.1016/j.msea.2011.03.034 ↗
9. Effects of solution temperatures on creep resistance in a powder metallurgy nickel-based superalloy
10. Creep deformation and rupture mechanism of an advanced wrought NiFe-based superalloy for 700° C class A-USC steam turbine rotor application10.1016/j.jallcom.2016.06.120 ↗
11. Creep of precipitation-hardened nickel-base alloy single crystals at high temperatures10.1007/BF02649637 ↗
12. Creep properties of a powder metallurgy disk superalloy at 700 ℃10.1557/jmr.2016.510 ↗
13. Morphological changes of γ′ precipitates in superalloy IN738LC at various cooling rates10.1016/j.msea.2008.07.069 ↗
14. Vacuum brazing of GH99 superalloy using graphene reinforced BNi-2 composite filler10.1016/j.jmst.2018.02.008 ↗
15. Intermetallic phase formation during brazing of a nickel alloy using a Ni–Cr–Si–Fe–B quinary filler alloy10.1080/13621718.2018.1553280 ↗
16. Interfacial diffusion reactions and mechanical properties of Ti3Al/Ni-based superalloy joints brazed with AgCuPd filler metal10.1016/j.matchar.2018.07.024 ↗
17. Diffusion brazing of IN718/AISI 316L dissimilar joint: microstructure evolution and mechanical properties10.1016/j.jmapro.2020.06.025 ↗
18. Properties of IN X-750/BNi-2/SAF 2205 joints formed by transient liquid phase bonding10.1016/j.jmatprotec.2019.116297 ↗
19. The effect of thermal cycle on the microstructural development of a powder metallurgy superalloy braze material10.1007/BF02647755 ↗
20. Investigation on hot deformation behavior of Waspaloy10.1016/j.msea.2012.11.024 ↗
21. Improvement of machinability of Waspaloy via laser-assisted machining10.1007/s00170-012-4012-8 ↗
22. Stress rupture fracture model and microstructure evolution for Waspaloy10.1007/s11661-013-1660-8 ↗
23. Effect of γ′ content on the mechanical behavior of the WASPALOY alloy system10.1016/S0921-5093(00)02042-6 ↗
24. Fatigue, creep and creep/fatigue behaviour of a nickel base superalloy at 700 ℃10.1111/j.1460-2695.1997.tb01488.x ↗
25. Stress relaxation behavior and mechanism of AEREX350 and Waspaloy superalloys10.1016/j.msea.2016.09.077 ↗
26. Vacuum Brazing of Inconel 718 to Waspaloy Superalloy Using Bni2 Brazing Filler10.4028/www.scientific.net/AMM.236-237.26 ↗
27. Hot tensile deformation behaviors and fracture characteristics of a typical Ni-based superalloy10.1016/j.matdes.2013.10.071 ↗
28. Effect of microstructure on work hardening behaviour of IN-617 alloy10.1016/j.msea.2020.140317 ↗
29. The formation of intragranular stress concentration in plastic deformed Ni-base superalloy: Governing factors and process10.1016/j.msea.2021.140820 ↗
30. Deformation mechanisms in a fine-grained Udimet 720LI nickel-base superalloy with high volume fractions of γ′ phases10.1016/j.msea.2016.07.068 ↗
31. Semi-quantitative creep-fatigue damage analysis based on diffraction-based misorientation mapping and the correlation to macroscopic damage evolutions10.1016/j.ijfatigue.2021.106227 ↗
32. Estimation of geometrically necessary dislocation density from filtered EBSD data by a local linear adaptation of smoothing splines10.1107/S1600576719004035 ↗
33. Deformation twinning during high temperature compression tests of the Ni-base superalloy ATI 718Plus®10.1016/j.actamat.2019.12.047 ↗
34. Hot deformation characterization of nickel-based superalloy UNS10276 through processing map and microstructural studies10.1016/j.jallcom.2016.10.029 ↗
35. A study on the effect of strain rate on the dynamic recrystallization mechanism of alloy 617B10.1007/s11661-016-3664-7 ↗
36. Matrix-diffusion-controlled coarsening of the γ′ Phase in waspaloy10.1007/s12540-019-00274-7 ↗
37. Synchrotron in-situ aging study and correlations to the γ′ phase instabilities in a high-refractory content γ-γ′ Ni-base superalloy10.1007/s11661-018-4683-3 ↗
38. Precipitation hardening of superalloys by ordered γ′-particles10.1016/0079-6425(85)90001-5 ↗
39. Investigation of creep deformation mechanisms at intermediate temperatures in René 88 DT10.1016/j.actamat.2005.03.017 ↗
40. Segregation and η phase formation along stacking faults during creep at intermediate temperatures in a Ni-based superalloy10.1016/j.actamat.2015.08.053 ↗
41. On precipitate shearing by superlattice stacking faults in superalloys10.1080/01418618808204522 ↗
42. Anisotropic creep properties of the nickel-base superalloy CMSX-410.1016/1359-6454(95)00315-0 ↗
43. Primary creep in single crystal superalloys: origins, mechanisms and effects10.1016/j.actamat.2006.09.026 ↗
44. Direct observation of an extended complex stacking fault in the γ′ phase of a Ni-base superalloy10.1016/j.scriptamat.2006.06.019 ↗
45. Influence of temperature on stacking fault energy and creep mechanism of a single crystal nickel-based superalloy10.1016/j.jmst.2016.01.020 ↗
46. Influence of γ’precipitate on deformation and fracture during creep in PM nickel-based superalloy10.1016/j.pnsc.2020.12.008 ↗
47. Mechanistic behaviour and modelling of creep in powder metallurgy FGH96 nickel superalloy10.1016/j.msea.2016.08.101 ↗
48. Strengthening methods in crystals, Applied
49. Precipitation hardening10.1007/BF02670416 ↗
50. Influence of Replacing Molybdenum with Tungsten on the Creep Fracture Property of Waspaloy Nickel-Based Alloy10.3390/met12111842 ↗
51. On the generation of microstrains during the plastic deformation of Waspaloy10.1016/S1359-6454(99)00314-6 ↗
52. Isothermal and thermo-mechanical fatigue behavior of the nickel base superalloy Waspaloy™ under uniaxial and biaxial-planar loading10.1016/j.ijfatigue.2015.07.020 ↗
53. Etch pit and γ′ precipitate evolution in controlled Waspaloy microstructures aged at 725, 800 and 875° C10.1016/j.actamat.2008.10.010 ↗
54. The creep and fracture behaviour of the cast, nickel-based superalloy, IN10010.1016/0025-5416(78)90151-9 ↗
55. The grain boundary microstructures of the base and modified RR 2072 bicrystal superalloys and their effects on the creep properties10.1016/S0921-5093(04)00905-0 ↗
56. The effect of triple junction type on grain-boundary sliding and accomodation in aluminium tricrystals10.1016/0956-7151(92)90048-J ↗
57. Grain-boundary sliding and triple-point fold in aluminum tricrystals10.1016/0036-9748(87)90429-7 ↗
58. On the anomalous temperature dependency of fatigue crack growth of SS 316 (N) weld10.1016/j.msea.2010.04.075 ↗