journal article·2023-06

Microstructures and properties of Ni-Si precipitation strengthened phosphor bronze

Guoliang Li, Zidi Hang, Shipeng Yue, Qing Liu, Zhongkai Guo, Haimin Ding, Jinchuan Jie, Tingju Li

Publisher page

Abstract

To strengthen phosphor bronze, this work attempted to form precipitate nanoparticles in the matrix by adding alloying elements. First, Ni and Si were identified as alloying elements through mixing enthalpy analysis. Then, Cu-8Sn-0.1P, Cu-8Sn-0.1P-0.5Ni-0.12Si, Cu-8Sn-0.1P-1Ni-0.24Si, and Cu-8Sn-0.1P-2Ni-0.48Si alloys were prepared by intermediate frequency induction furnace. After that, the microstructures of these alloys were characterized and their properties were tested. Experimental results indicated that Ni 31Si 12, Ni 2Si, and Ni 5P 4 phases are newly formed in the as-cast microstructure after adding Ni and Si. At the same time, the eutectoid size of α-Cu and Cu 41Sn 11 in the as-cast microstructure of Ni-Si added phosphor bronze is reduced, the secondary dendrite arm spacing is reduced, and the segregation is also improved. After aging treatment, nano-sized cellular Ni 2Si and trace Ni 5P 4 phases are precipitated in the Ni-Si added phosphor bronze. With the formation of nanoprecipitates, Ni-Si added phosphor bronzes show excellent precipitation strengthening effect after aging treatment, and the electrical conductivity of Cu-8Sn-0.1P-0.5Ni-0.12Si and Cu-8Sn-0.1P-1Ni-0.24Si alloys is also slightly higher than that of Cu-8Sn-0.1P. This study provides a new solution for strengthening phosphor bronze, enabling phosphor bronze alloys to meet higher performance and broader applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanoporous metals and alloys · Advanced materials and composites · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Application of single pan thermal analysis to Cu-Sn peritectic alloys10.1016/j.actamat.2007.12.006 ↗
2. Effects of Sn content and hot deformation on microstructure and mechanical properties of binary high Sn content Cu-Sn alloys10.1016/j.msea.2020.140054 ↗
3. A DSC analysis of thermodynamic properties and solidification characteristics for binary Cu-Sn alloys10.1016/j.actamat.2012.08.013 ↗
4. Morphological and mechanical behaviour of Cu-Sn alloys-a review10.1007/s12540-020-00899-z ↗
5. Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion10.1016/j.triboint.2018.08.021 ↗
6. Development of wear resistant Cu-12Sn-1.5Ni alloy via minor addition of Fe during casting process10.1016/j.apsusc.2021.151623 ↗
7. Co and Ti effect on hot workability of phosphor bronze10.1016/j.jallcom.2022.163778 ↗
8. Selective laser melting of Cu-10Sn-0.4P: processing, microstructure, properties, and brief comparison with additively manufactured Cu-10Sn10.1002/adem.202100716 ↗
9. Material selection in the design of electrical connectors10.1016/j.jmatprotec.2004.04.209 ↗
10. Strength of joints produced by transient liquid phase bonding in the Cu-Sn system10.1016/j.actamat.2005.01.013 ↗
11. Additive manufacturing of Cu-10Sn bronze10.1016/j.matlet.2015.05.076 ↗
12. Implication of peritectic composition in historical high-tin bronze metallurgy10.1016/j.matchar.2009.05.009 ↗
13. The deformation compatibility and recrystallisation behaviour of the alloy CuSn10P110.1016/j.matchar.2021.110940 ↗
14. Refinement strengthening, second phase strengthening and spinodal microstructure-induced strength-ductility trade-off in a high-entropy alloy10.1016/j.msea.2022.143343 ↗
15. Processing of Cu-Al2O3 metal matrix nanocomposite materials by using high energy ball milling10.1016/S0921-5093(00)00627-4 ↗
16. Deformation mechanism and enhanced properties of Cu-TiB2 composites evaluated by the in-situ tensile test and microstructure characterization10.1016/j.jallcom.2020.156555 ↗
17. Carbon nanotube reinforced Cu-10Sn alloy composites: mechanical and thermal properties10.1016/j.msea.2011.05.038 ↗
18. Alloy design strategies to increase strength and its trade-offs together10.1016/j.pmatsci.2020.100720 ↗
19. The effect of iron on the microstructure and mechanical properties of a cast Cu-12Sn-1.5Ni (wt%) alloy10.1016/j.msea.2020.139330 ↗
20. Formation mechanism of in-situ nanostructured grain in cast Cu-10Sn-2Zn-1.5Fe-0.5Co (wt%) alloy10.1016/j.matdes.2016.01.064 ↗
21. Combining synergetic effects of gradient nanotwins and nanoprecipitates in heterogeneous bronze alloy10.1016/j.actamat.2022.117831 ↗
22. The Ni-Si (nickel-silicon) system10.1007/BF02868885 ↗
23. Phase diagram calculation: past, present and future10.1016/S0079-6425(03)00025-2 ↗
24. Microstructure and mechanical properties of Cu-Ni-Si alloys10.1016/j.msea.2006.12.163 ↗
25. Improvement in strength and electrical conductivity of Cu-Ni-Si alloys by aging and cold rolling10.1016/j.jallcom.2005.09.037 ↗
26. The effect of bimodal structure with nanofibers and normal precipitates on the mechanical and electrical properties of CuNiSi alloy10.1016/j.matchar.2020.110642 ↗
27. Study of the mechanical, structural, and electrical properties and annealing effect of a Cu-30Zn-1Ni-0.2 Si alloy fabricated using cryogenic rolling10.1088/2053-1591/ab49cd ↗
28. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
29. Cu-Ni-Sn-Si alloys designed by cluster-plus-glue-atom model10.1016/j.matdes.2019.107641 ↗
30. Minor-alloyed Cu-Ni-Si alloys with high hardness and electric conductivity designed by a cluster formula approach10.1016/j.pnsc.2017.06.006 ↗
31. A new strategy to design eutectic high-entropy alloys using mixing enthalpy10.1016/j.intermet.2017.09.001 ↗
32. Growth mechanism of primary Ti5Si3 phases in special brasses and their effect on wear resistance10.1016/j.jmst.2020.05.063 ↗
33. Studies of electrical resistivity of an annealed Cu-Fe composite10.1063/1.4803716 ↗
34. Effect of V addition on microstructures and mechanical properties of Cu-15Ni-8Sn alloy10.1016/j.msea.2019.01.084 ↗
35. Effects of solute concentration on the stacking fault energy in copper alloys at finite temperatures10.1016/j.jallcom.2017.07.332 ↗
36. Dendritic segregation and arm spacing in directionally solidified CMSX-4 superalloy10.1080/13640461.2016.1166726 ↗
37. Construction of rGO-SnO2 heterojunction for enhanced hydrogen detection10.1016/j.apsusc.2022.152623 ↗
38. Study on high-strength and high-conductivity Cu-Fe-P alloys10.1016/j.msea.2006.01.068 ↗
39. Precipitation hardening in metals10.1179/026708399773002782 ↗
40. Preparation and properties of Al2O3-reinforced Cu-Ni-Sn metallic matrix for applications in diamond-cutting tools10.1016/j.diamond.2020.108025 ↗
41. Increasing toughness by promoting discontinuous precipitation in Cu–Ni–Si alloys10.1080/09500839.2016.1189099 ↗
42. Slow strain rate tensile tests on notched specimens of as-cast pure Cu and Cu-Fe-Co