journal article·2023-05

Validation of Cr6Fe18Mo in tribaloy T-800 coating fabricated by induction heating assisted laser cladding

Zhao Yong, Deqiao Xie, Yang Liu, Lida Shen, Shichun Jiang, Fei Xing, Lili Chang, Zongjun Tian

Publisher page

Abstract

Due to excellent performance of high-temperature wear and corrosion resistance, Tribaloy 800 (T800) alloy has been used in steel and petrochemical industry. Most scholars believe that it is Laves phase (Co 3Mo 2 Si) that leads to high crack sensitivity of T-800 alloy. However, the formation of Laves phase is impossible under conditions where there is a tendency of phase separation. In this study, the phases composition of T-800 coatings fabricated by induction heating assisted laser cladding (IHLC) is discussed. Results show that T-800 coatings prepared by IHLC are consist of Cr 6Fe 18Mo 5 and γ-Co supersaturated solid solution with many lattice defects. With the increase of preheating temperature, the fraction of Cr 6Fe 18Mo 5 phase can be increased to be 51.19%, due to sufficient Fe element and maintaining time of temperature above 700 °C. The fraction of γ-Co with lattice defects and residual tensile stress in coating can be decreased with the increase of preheating temperature, which lead to a crack-free T-800 coating.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. The effects of heat treatment on microstructure and mechanical properties of tribaloy 400 coatings deposited by laser cladding
2. Microstructure and sliding wear behaviour of tribaloy T-800 coatings deposited by laser cladding10.1016/j.wear.2005.04.020 ↗
3. Sliding wear characteristics of molybdenum containing Stellite 12 coating at elevated temperatures10.1016/j.triboint.2015.06.006 ↗
4. Enabling multi-material structures of Co-based superalloy using laser directed energy deposition additive manufacturing10.3390/met11111717 ↗
5. Interface bonding behavior and failure mechanism of joining Tribaloy T-800/AISI 4140 via laser engineered net shaping10.1016/j.optlastec.2022.108620 ↗
6. Comparative study of Co-based alloys in repairing low Cr-Mo steel components by laser cladding10.1016/j.phpro.2012.10.050 ↗
7. Characterization and wear of oxides formed on CoCrMoSi alloy coatings, Surface & Coating
8. Micromechanical behavior and wear resistance of hybrid plasma-sprayed TiC reinforced Tribaloy-40010.1016/j.surfcoat.2021.127682 ↗
9. A. Renz, B. Prakash, J. Hardell, O. Lehmann, High-Temperature Sliding Wear Behaviour of Stellite®12 and Tribaloy®T400, Elsevier B.V., 2018.10.1016/j.wear.2018.02.013 ↗
10. Microstructure and wear property of laser-clad Co3Mo2Si/Coss wear resistant coatings10.1016/j.surfcoat.2010.06.064 ↗
11. Tribo-mechanical insight into carbide-laden hybrid suspension-powder plasma-sprayed Tribaloy T400 composite coatings10.1016/j.surfcoat.2020.125957 ↗
12. Comparative study of Co-based alloys in repairing low Cr-Mo steel components by laser cladding10.1016/j.phpro.2012.10.050 ↗
13. Fretting wear damage mechanism of CoMoCrSi coatings10.1016/j.wear.2021.203896 ↗
14. Micromechanical behaviour and wear resistance of hybrid plasma-sprayed TiC reinforced Tribaloy-40010.1016/j.surfcoat.2021.127682 ↗
15. Frank · Adv. Mater. Process · 2010 · 168 · 19
16. Li · Surf. Coat. Technol. · 2009 · 204 · 110610.1016/j.surfcoat.2009.07.035 ↗
17. Tschiptschin, Microabrasion of three experimental cobalt-chromium alloys; wear rates and wear mechanisms10.1016/j.wear.2017.07.023 ↗
18. Effect of yttrium and aluminum additions on isothermal oxidation behavior of Tribaloy T-700 alloys10.1016/j.corsci.2014.07.053 ↗
19. Novel wear resistant carbide-laden coatings deposited by powder-suspension hybrid plasma spray: Characterization and testing10.1016/j.surfcoat.2020.126147 ↗
20. Isothermal oxidation behavior of Tribaloy TM T400 and T-80010.1038/s41529-018-0060-3 ↗
21. Microstructures, mechanical properties and tribological behaviors of HVOF-sprayed CoMoCrSi alloy coatings before and after 800 °C-annealed treatment10.1016/j.jallcom.2022.164662 ↗
22. Microstructure and high-temperature sliding wear property of Coss/Co3Mo2Si metal silicide alloys10.1016/j.msea.2005.01.020 ↗
23. A structural of the Fe-Cr system alloys10.1016/S1359-6454(96)00088-2 ↗
24. Fe-rich portion of the Fe-Cr phase diagram: electron microscopy study10.1023/A:1015259517812 ↗
25. Formation of microstructures responsible for remarkable properties of the Ni- and Co-based superalloys10.1016/j.actamat.2016.02.051 ↗
26. Structural transformations in the Co53Mo35Cr12 alloy at different temperatures10.1016/j.jallcom.2014.02.135 ↗
27. Isothermal Oxidation Performance of Laser Cladding Assisted with Preheat (LCAP) Tribaloy T-800 Composite Coatings Deposited on EN810.3390/coatings11070843 ↗
28. Parameter optimization of T800 coating fabricated by EHLA based on response surface methodology10.1016/j.optlastec.2022.108837 ↗
29. The Tribaloy T-800 Coatings Deposited by Laser Engineered Net Shaping10.3390/ma12091366 ↗
30. Determination of the Fe-Cr-Mo phase diagram at intermediate temperatures using dual-anneal diffusion multiples10.1007/s11669-015-0423-1 ↗
31. A novel crack-free Ti-modified Al-Cu-Mg alloy designed for selective laser melting
32. Selecting process parameters of crack-free Ni60A alloy coating prepared by coaxial laser cladding10.1016/j.optlastec.2021.107805 ↗