Hydrogen-induced evolution associated with nano-scale precipitated phases in AlCoCrFeNi2.1 high-entropy alloy
Source abstract
Abstract
Hydrogen diffusion behavior of high-entropy alloy AlCoCrFeNi 2.1 was investigated and it was found that the alloy exhibits a low hydrogen diffusion coefficient. Dislocations proliferated greatly in body-centered cubic (BCC) and face-centered cubic (FCC) phases after hydrogenation. Plentiful rhombic net-like morphology appeared on the surface of FCC phase, while abundant nano-scale precipitated phases were found in BCC phases. Subsequent experimental results show that the growth of nano-scale precipitate phases can further delay the hydrogen diffusion and reduce the surface hardness of the alloy. The relationship between the hydrogen-induced evolution caused by hydrogen penetration is strongly correlated with the microstructure and nano-scale precipitate phases in both FCC and BCC phases. Nanophases are found to be responsible for the hydrogen-induced evolution and associated changes in properties of this material.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Compositional dependence of hydrogenation performance of Ti-Zr-Hf-Mo-Nb high-entropy alloys for hydrogen/tritium storage10.1016/j.jmst.2019.08.060 ↗
2. Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy10.1016/j.actamat.2015.07.004 ↗
3. Localized plasticity and associated cracking in stable and metastable high-entropy alloys pre-charged with hydrogen10.1016/j.prostr.2018.12.119 ↗
4. Effect of hydrogen-induced surface steps on the nanomechanical behavior of a CoCrFeMnNi high-entropy alloy revealed by in-situ electrochemical nanoindentation10.1016/j.intermet.2019.106605 ↗
5. Toward expanding the realm of high entropy materials to platinum group metals: a review
6. Faceted Kurdjumov-Sachs interface-induced slip continuity in the eutectic high-entropy alloy, AlCoCrFeNi2.1
7. Loss of integrity of hydrogen technologies: a critical review10.1016/j.ijhydene.2020.06.021 ↗
8. Fracture Mechanics: Fundamentals and Applications
9. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
10. Cryogenic-mechanical properties and applications of multiple-basis-element alloys10.3390/met12122075 ↗
11. Influences of Ti additions on the microstructure and tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy10.1016/j.intermet.2020.107024 ↗
12. Y-Hf co-doped AlCoCrFeNi2.1 eutectic high-entropy alloy with excellent oxidation and spallation resistance under thermal cycling conditions at 1100℃ and 1200℃10.1016/j.corsci.2021.109515 ↗
13. Effect of high magnetic field assisted heat treatment on microstructure and properties of AlCoCrCuFeNi high-entropy alloy10.1016/j.matlet.2021.130540 ↗
14. Experimental and finite element simulation studies on hot deformation behavior of AlCoCrFeNi2.1 eutectic high entropy alloy10.1016/j.jallcom.2018.03.262 ↗
15. Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing10.1016/j.msea.2016.08.048 ↗
16. Tribological behavior of an AlCoCrFeNi2.1 eutectic high entropy alloy sliding against different counterfaces10.1016/j.triboint.2020.106599 ↗
17. Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.actamat.2017.07.041 ↗
18. Phase separation of AlCoCrFeNi2.1 eutectic high-entropy alloy during directional solidification and their effect on tensile properties10.1016/j.intermet.2019.106569 ↗
19. Effect of lamellar microstructure on fatigue crack initiation and propagation in AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.engfracmech.2021.107615 ↗
20. Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy10.1016/j.matchemphys.2017.06.023 ↗
21. Deformation mechanism during high-temperature tensile test in an eutectic high-entropy alloy AlCoCrFeNi2.110.1016/j.msea.2018.03.078 ↗
22. Hydrogen embrittlement of additively manufactured AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.corsci.2021.110007 ↗
23. Uncovering the critical factor governing the fatigue crack propagation under the coexistence of multi-interfaces in AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.engfracmech.2021.108132 ↗
24. Effects of Al-Si coating structures on bendability and resistance to hydrogen embrittlement in 1.5-GPa-grade hot-press-forming steel10.1016/j.actamat.2021.117561 ↗
25. Modelling of hydrogen diffusion and hydrogen induced cracking in supermartensitic and duplex stainless steels10.1016/j.matdes.2008.04.026 ↗
26. An investigation on the eutectic structure and precipitates in the high-entropy alloy AlCoCrFeNi2. 1
27. Effective hydrogen diffusion coefficient for CoCrFeMnNi high-entropy alloy and microstructural behaviors after hydrogen permeation10.1016/j.ijhydene.2020.02.012 ↗
28. Hydrogen transport in a duplex stainless steel10.1016/S1359-6454(00)00122-1 ↗
29. Diffusion coefficient of hydrogen interstitial atom in α-Fe, γ-Fe and ε-Fe crystals by first-principle calculations10.1016/j.ijhydene.2017.08.212 ↗
30. First-principles study on hydrogen diffusivity in BCC, FCC, and HCP iron10.1007/s11661-018-4815-9 ↗
31. Hydrogen diffusion and hydrogen influenced critical stress intensity in an API X70 pipeline steel welded joint-experiments and FE simulations10.1016/j.ijhydene.2012.05.005 ↗
32. Recent advances on environmental corrosion behavior and mechanism of high-entropy alloys10.1016/j.jmst.2020.11.044 ↗
33. Effects of high-pressure hydrogen charging on the structure of austenitic stainless steels10.1016/S0921-5093(04)00822-6 ↗
34. Anomalous decrease in X-ray diffraction intensities of Cu-Ni-Al-Co-Cr-Fe-Si alloy systems with multi-principal elements10.1016/j.matchemphys.2007.01.003 ↗
35. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
36. A new strategy to overcome the strength-ductility trade off of high entropy alloy10.1016/j.scriptamat.2022.114678 ↗
37. Resolving the hydrogen effect on dislocation nucleation and mobility by electrochemical nanoindentation10.1016/j.scriptamat.2011.12.004 ↗
38. Evaluation of hydrogen trapping in high strength steels by thermal desorption spectroscopy10.1016/j.msea.2012.04.078 ↗
39. The influence of intergranular and interphase boundaries and δ-ferrite volume fraction on hydrogen embrittlement of high-nitrogen steel10.1016/j.ijhydene.2021.06.183 ↗
40. Hydrogen induced microstructure evolution and cracking mechanism in a metastable dual-phase high-entropy alloy10.1016/j.msea.2021.141490 ↗
41. Influences of hydrogen charging method on the hydrogen distribution and nanomechanical properties of face-centered cubic high-entropy alloy: a comparative study10.1016/j.scriptamat.2019.04.025 ↗
42. 1D growth of Cr-rich nanophase induced by hydrogen in high-entropy alloy AlCoCrFeNi2.110.1016/j.matlet.2022.133163 ↗
43. Hydrogen embrittlement understood10.1007/s11663-015-0325-y ↗
44. The role of hydrogen in hardening/softening steel: influence of the charging process10.1016/j.scriptamat.2015.05.017 ↗
45. Hydrogen-enhanced localized plasticity-a mechanism for hydrogen-related fracture10.1016/0921-5093(94)90975-X ↗
46. Hydrogen-induced nanohardness variations in a CoCrFeMnNi high-entropy alloy10.1016/j.ijhydene.2017.02.061 ↗
47. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
48. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
49. Effect of hydrogen charging time on hydrogen embrittlement of CoCrFeMnNi high-entropy alloy10.1016/j.corsci.2021.110073 ↗
50. Transmission electron microscopy characterization of dislocation structure in a face-centered cubic high-entropy alloy Al0.1CoCrFeNi10.1016/j.actamat.2017.10.050 ↗
51. Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy10.1038/srep35863 ↗
52. Effect of prestrain on hydrogen diffusion and trapping in structural steel10.1016/j.matlet.2018.10.049 ↗
53. In-situ visualization of corrosion behavior of AlxCoCrFeNi high entropy alloys during electrochemical polarization10.1016/j.jallcom.2020.156014 ↗
54. Towards a unified and practical industrial model for prediction of hydrogen embrittlement and damage in steels10.1016/j.prostr.2016.06.078 ↗
55. Hydrogen damage of steels: a case study and hydrogen embrittlement model10.1016/j.engfailanal.2015.05.017 ↗
56. Hydrogen-induced phase boundary Cr-segregation in high-entropy alloy AlCoCrFeNi2.110.1016/j.mtla.2022.101556 ↗
57. Effect of electrochemical hydrogen charging on the mechanical property and corrosion behavior of Ti-3Mo alloy10.1016/j.corsci.2022.110219 ↗
58. Hydrogen effects on nanovoid nucleation in face-centered cubic single-crystals10.1016/j.actamat.2007.09.012 ↗
59. Cr effect on hydrogen embrittlement of Fe3Al-based iron aluminide intermetallics: surface or bulk effect10.1016/j.actamat.2014.01.042 ↗
60. Heterogeneous dislocation nucleation from surfaces and interfaces as governing plasticity mechanism in nanoscale metals10.1557/jmr.2011.338 ↗