N-rich porous Si@SiOx/NC composites derived from in situ polymerisation of acrylic acid as anode for Li-ion batteries
Source abstract
Abstract
Si possesses a high theoretical specific capacity as anode material for Li-ion batteries. However, it has poor electrical conductivity and severe volume effect during charge-discharge processes, resulting in substantial internal resistance and significantly reduced available capacity. These issues can be greatly mitigated by encapsulating Si nanoparticles within a carbonous material. Hence, network precursors are synthesised herein to encapsulate Si nanoparticles by in situ polymerisation of acrylic acid and melamine. After freeze-drying, the precursors are pyrolysed under Ar atmosphere to obtain homogeneous N-rich porous Si@SiO x /NC composites. A fibrous network structure is acquired by using appropriate amounts of polyacrylic acid and Si. Such a structure provides an outstanding electron transmission network and effectively buffers the volume change of Si to maintain a stable electrode structure. The results show that when the content of Si nanoparticles in the composite is 35.2 wt%, the prepared Si@SiO x/NC−2 composite has abundant micropores (267.90 m 2 g −1 ) and mesopores (17.48 m 2 g −1). The material shows an initial discharge-specific capacity of 1833.6 mAh g −1 and Coulombic efficiency of 65%. After 150 cycles at 0.1 A g −1, the discharge-specific capacity is still as high as 922.8 mAh g −1 . The excellent electrochemical performance of the Si@SiO x/NC composites is due to the three-dimensional conductive structure. The unique construction could play an important role in expanding the commercial application of Si-based anode materials in Li-ion batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. Recent progress and perspectives on silicon anode: Synthesis and prelithiation for LIBs energy storage10.1016/j.jechem.2021.04.013 ↗
2. Recent trends in silicon/graphene nanocomposite anodes for lithium-ion batteries10.1016/j.jpowsour.2021.229709 ↗
3. Recent progress and future perspective on practical silicon anode-based lithium ion batteries10.1016/j.ensm.2022.01.042 ↗
4. A Review on recent advances for boosting initial Coulombic efficiency of silicon anodic lithium ion batteries10.1002/smll.202102894 ↗
5. Recent progress and future perspective on practical silicon anode-based lithium ion batteries10.1016/j.ensm.2022.01.042 ↗
6. Assembly: A key enabler for the construction of superior silicon-based anodes10.1002/advs.202203162 ↗
7. Tailoring the structure of silicon-based materials for lithium-ion batteries via electrospinning technology
8. Synthesis of embossing Si nanomesh and its application as an anode for lithium ion batteries10.1016/j.jpowsour.2017.07.048 ↗
9. Structure design and mechanism analysis of silicon anode for lithium-ion batteries10.1007/s40843-019-9464-0 ↗
10. Solid electrolyte interphase manipulation towards highly stable hard carbon anodes for sodium ion batteries10.1016/j.ensm.2019.10.006 ↗
11. A general method of manipulating formation, composition, and morphology of solid–electrolyte interphases for stable Li-Alloy anodes10.1021/jacs.7b07584 ↗
12. Carbon free silicon/polyaniline hybrid anodes with 3D conductive structures for superior lithium-ion batteries10.1039/C9CC09132G ↗
13. Surface and interface engineering of silicon-based anode materials for lithium-ion batteries10.1002/aenm.201701083 ↗
14. Structure design and mechanism analysis of silicon anode for lithium-ion batteries10.1007/s40843-019-9464-0 ↗
15. Design of high-energy-dissipation, deformable binder for high-areal-capacity silicon anode in lithium-ion batteries10.1016/j.cej.2021.129991 ↗
16. Highly energy-dissipative, fast self-healing binder for stable Si anode in lithium-ion batteries10.1002/adfm.202005699 ↗
17. A highly crosslinked polymeric binder for silicon anode in lithium-ion batteries
18. Silicon nanoparticle self-incorporated in hollow nitrogen-doped carbon microspheres for lithium-ion battery anodes10.1016/j.electacta.2020.137630 ↗
19. Enhancing lithium storage performance by strongly binding silicon nanoparticles sandwiching between spherical graphene10.1016/j.apsusc.2020.148191 ↗
20. Synthesis of silicon nanosheets from kaolinite as a high-performance anode material for lithium-ion batteries10.1016/j.jpcs.2019.109227 ↗
21. Different dimensional nanostructured silicon materials from synthesis methodology to application in high-energy lithium-ion batteries10.1002/ente.201900962 ↗
22. Architecture and performance of Si/C microspheres assembled by nano-Si via electro-spray technology as stability-enhanced anodes for lithium-ion batteries10.1016/j.jallcom.2022.163940 ↗
23. Large-scale self-catalyzed spongelike silicon nano-network-based 3D anodes for high-capacity lithium-ion batteries10.1021/acs.nanolett.8b05127 ↗
24. Core-shell structure of porous silicon with nitrogen-doped carbon layer for lithium-ion batteries10.1016/j.materresbull.2018.09.004 ↗
25. Preparation and characterization of coreeshell structure Si/C composite with multiple carbon phases as anode materials for lithium ion batteries10.1016/j.jallcom.2015.10.217 ↗
26. A honeycomb-cobweb inspired hierarchical core-shell structure design for electrospun silicon/carbon fibers as lithium-ion battery anodes10.1016/j.carbon.2015.11.048 ↗
27. A submicron Si@C core-shell intertwined with carbon nanowires and graphene nanosheet as a high-performance anode material for lithium ion battery
28. C.M. Zhang. A self-assembled silicon/phenolic resin-based carbon core-shell nanocomposite as an anode material for lithium-ion batteries10.1039/C7RA13580G ↗
29. High power and stable P-doped yolk-shell structured Si@C anode simultaneously enhancing conductivity and Li+ diffusion kinetics10.1007/s12274-020-3142-9 ↗
30. Uniform yolk-shell structured Si-C nanoparticles as a high performance anode material for the Li-ion battery10.1039/C9CC07997A ↗
31. Facile preparation of nitrogen-doped yolk-shell Si@void@C/CNTs microspheres as high-performance anode in lithium-ion batteries
32. Yolk-shell Si@void@C composite with Chitooligosaccharide as a C–N precursor for high capacity anode in lithium-ion batteries10.1016/j.jpcs.2021.109965 ↗
33. High-rate performance of porous Si@SiOx@N-rich carbon nanofibers as anode in lithium-ion batteries under high temperature10.1002/celc.201901111 ↗
34. A facile synthesis of phosphorus doped Si/SiO2/C with high coulombic efficiency and good stability as an anode material for lithium ion batteries10.1016/j.electacta.2021.138385 ↗
35. Rapid CO2 exfoliation of Zintl phase CaSi2-derived ultrathin free-standing Si/SiOx/C nanosheets for high-performance lithium storage10.1007/s40843-021-1708-6 ↗
36. SiOx/C-Ag nanosheets derived from Zintl phase CaSi2 via a facile redox reaction for high performance lithium storage10.1007/s12274-021-3491-z ↗
37. In situ generated carbon nanosheet-covered micron-sized porous Si composite for long-cycling life lithium-ion batteries10.1021/acsaem.0c02445 ↗
38. Silicon nanoparticles encapsulated in multifunctional crosslinked nano-silica/carbon hybrid matrix as a high-performance anode for Li-ion batteries10.1016/j.cej.2021.129468 ↗
39. Dual-confined SiOx encapsulated in PVA derived carbon layer and chitin derived N-doped carbon nanosheets for high-performance lithium storage10.1016/j.cej.2021.129754 ↗
40. Scalable production of 3D plum-pudding-like Si/C spheres: towards practical application in Li-ion batteries10.1016/j.nanoen.2016.04.014 ↗
41. ‘Concrete’’ inspired construction of a silicon/carbon hybrid electrode for high performance lithium ion battery10.1016/j.carbon.2015.05.032 ↗
42. One-pot sol-gel synthesis of Si/C yolk-shell anodes for high performance lithium-ion batteries10.1016/j.jallcom.2020.155135 ↗
43. Preparation and electrochemical properties of Si@C/CNTs composites derived from crosslinked chitosan10.1016/j.jallcom.2022.165212 ↗
44. Electrospun flexible Si/C@CNF nonwoven anode for high capacity and durable lithium-ion battery10.1016/j.coco.2018.10.012 ↗
45. Carbon-confined PVA-derived silicon/silica/carbon nanofiber composites as anode for lithium-ion batteries10.1149/2.0811414jes ↗
46. Optimal microstructural design of pitch-derived soft carbon shell in yolk-shell silicon/carbon composite for superior lithium storage10.1016/j.electacta.2021.137924 ↗
47. Engineering the distribution of carbon in silicon oxide nanospheres at atomic level for highly stable anodes10.1002/anie.201902083 ↗
48. Heteroatom-doped carbon-based materials for lithium and sodium ion batteries10.1016/j.ensm.2020.07.027 ↗
49. Boron doping-induced interconnected assembly approach for mesoporous silicon oxycarbide architecture10.1093/nsr/nwaa152 ↗
50. Boron heteroatom-doped silicon-carbon peanut-like composites enables long life lithium-ion batteries10.1007/s12598-021-01741-0 ↗
51. Achieving high volumetric lithium storage capacity in compact carbon materials with controllable nitrogen doping10.1002/adfm.201807441 ↗
52. Three-dimensional nitrogen-doped carbon coated hierarchically porous silicon composite as lithium-ion battery anode10.1016/j.jallcom.2021.159921 ↗
53. Preparation and characterization of graphitic carbon nitride through pyrolysis of melamine10.1007/s00339-008-4816-4 ↗
54. Acrylic-melamine modified DGEBA-epoxy coatings and their anticorrosive behavior10.1016/j.porgcoat.2003.10.003 ↗
55. Flexible freestanding 3D Si/C composite nanofiber film fabricated using the electrospinning technique for lithium-ion batteries anode10.1016/j.ssi.2019.04.017 ↗
56. Nodes-connected silicon-carbon nanofibrous hybrids anodes for lithium-ion batteries10.1016/j.apsusc.2021.148944 ↗
57. Controlling surface oxides in Si/C nanocomposite anodes for high-performance Li-ion batteries10.1002/aenm.201801718 ↗
58. Experimental methods in chemical engineering: specific surface area and pore size distribution measurements—BET, BJH, and DFT10.1002/cjce.23632 ↗
59. Double-buffer silicon-carbon anode material by a dynamic self-assembly process for lithium-ion batteries10.1016/j.electacta.2021.139041 ↗
60. Pinecone-like silicon@carbon microspheres covered by Al2O3 nano-petals for lithium-ion battery anode under high temperature10.1016/j.electacta.2021.138461 ↗
61. Nickel-assisted one-pot preparation of graphenic carbon matrices embedded with silicon nanoparticles as anode materials for lithium ion batteries10.1016/j.carbon.2021.04.042 ↗
62. Functionalization-assistant ball milling towards Si/graphene anodes in high performance Li-ion batteries10.1016/j.carbon.2021.05.024 ↗
63. XPS on Li-battery-related compounds: analysis of inorganic SEI phases and a methodology for charge correction10.1021/acsaem.8b00406 ↗