Study on the improvement and mechanism of AA6101 electrical conductivity by trace TM (Zr, V, Ti) elements-assisted boron treatment
Source abstract
Abstract
The transition metal elements (TMs) are one of the most important factors that damage the electrical conductivity (EC) of AA6101. But according to our study, during boron treatment process introducing trace TMs is beneficial to improve boron treatment efficiency and purify the Al matrix. In this work, boron treatment and TM-assisted composite boron treatment are carried out to improve the EC of AA6101 and the influence mechanism of TMs (Zr, V, Ti) on boron treatment is studied in detail. Results show that the EC of AA6101 improves and then decreases with the increasing of B addition, reaching a maximum value of 53.4% International Annealed Copper Standard (IACS) with 0.09% B (all compositions quoted in this work are in wt% unless otherwise stated). But by analyzing the boron reaction products, it can be found that the TM borides are core-shell structure and the core mainly is unreacted AlB 2 compounds, thus the boron treatment efficiency is relative low. Based on this, besides 0.09% B addition, different amounts of TMs (Zr, V, Ti) are introduced into Al melts to break the core-shell structure and promote the boron reaction going on. When the additions of Zr, V, and Ti are 0.05%, 0.06%, and 0.03%, the EC of AA6101 can reach 54.2%IACS, 53.9%IACS, and 53.7%IACS, respectively. By comparing it is obvious that Zr-assisted boron treatment is the best and the EC of AA6101 is 8.2% better than AA6101 without treatment (50.1%IACS). On the basis of thermodynamics and dynamics, Zr can replace the TMs on the boride particles, and the replaced TMs continue to react with the unreacted AlB 2 in the boride center. Thus more TMs impurities are involved in the reaction and their damage to EC of AA6101 can be reduced. At last, a schematic diagram is drawn to explain the influence mechanism of TMs on boron reaction process, which is useful for the development of conductive Al alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Solid-solution copper alloys with high strength and high electrical conductivity10.1016/j.scriptamat.2012.12.027 ↗
2. Nanoprecipitates induced dislocation pinning and multiplication strategy for designing high strength, plasticity and conductivity Cu alloys10.1016/j.scriptamat.2021.113741 ↗
3. Haupin · 2003
4. Effect of Fe on microstructure and properties of 8xxx aluminum conductor alloys10.1007/s11665-016-2373-0 ↗
5. Effect of Fe-rich particles and solutes on the creep behaviour of 8xxx alloys10.1080/02670836.2016.1258156 ↗
6. Effects of minor Cu and Mg additions on microstructure and material properties of 8xxx aluminum conductor alloys10.1557/jmr.2017.56 ↗
7. Comparative fatigue resistance of overhead conductors made of aluminium and aluminium alloy: tests and analysis10.1016/j.proeng.2015.12.662 ↗
8. Influence of AlB2 compound on elimination of incoherent precipitation in artificial aging of wires drawn from redraw rod extruded from billets cast of alloy AA-6101 by vertical direct chill casting10.1016/j.matdes.2007.06.004 ↗
9. Modification of AA-6201 alloy for manufacturing of high conductivity and extra high conductivity wires with property of high tensile stress after artificial aging heat treatment for all-aluminium alloy conductors10.1016/j.matdes.2005.06.005 ↗
10. Influence of natural aging and cold deformation on the mechanical and electrical properties of 6201–T81 aluminum alloy wires
11. Fatigue performance of overhead conductors tested under the same value of H/w parameter10.1016/j.proeng.2018.02.035 ↗
12. Conductive Al Alloys: the contradiction between strength and electrical conductivity10.1002/adem.202001249 ↗
13. M. Iraizoz, N. Rossello, M. Amado, 2016. Influence of Solution Heat Treatment Temperature in the Final Properties of AA6201 Drawn Wire. Light Metals 2015 Springer International Publishing, Cham, 2016.10.1002/9781119093435.ch33 ↗
14. Development of high-strength and high-electrical-conductivity aluminum alloys for power transmission conductors
15. Smyrak · 2016
16. Modification of AA-6201 alloy for manufacturing of high conductivity and extra high conductivity wires with property of high tensile stress after artificial aging heat treatment for all-aluminium alloy conductors10.1016/j.matdes.2005.06.005 ↗
17. Microstructures and properties of Al–Mg–Si alloy overhead conductor by horizontal continuous casting and continuous extrusion forming process10.1016/j.msea.2015.09.114 ↗
18. Nanostructured Al and Cu alloys with superior strength and electrical conductivity10.1007/s10853-015-9354-9 ↗
19. Enhancing electrical conductivity and strength in Al alloys by modification of conventional thermo-mechanical process10.1016/j.matdes.2015.07.133 ↗
20. Enhanced strength and electrical conductivity of Al–Mg–Si alloy by thermo-mechanical treatment10.1016/j.msea.2015.10.050 ↗
21. Proposed solution for random characteristics of aluminium alloy wire rods due to the natural aging10.1016/j.mspro.2015.04.012 ↗
22. A modified processing route for high strength Al-Mg-Si aluminum conductors based on twin-roll cast strip10.1016/j.jmatprotec.2019.116463 ↗
23. Effect of Zr addition on properties of Al–Mg–Si aluminum alloy used for all aluminum alloy conductor10.1016/j.matdes.2011.04.034 ↗
24. Effects of zirconium addition and solute iron concentration on the softening behavior of 6101 aluminum conductor alloy
25. Effect of Ce addition on castability, mechanical properties and electric conductivity of Al–03Si–02Mg alloy10.1179/1743133615Y.0000000002 ↗
26. Study on the improvement of electrical conductivity and mechanical properties of low alloying electrical aluminum alloys. Compos
27. Effects of grain refinement and boron treatment on electrical conductivity and mechanical properties of AA1070 aluminum10.1016/j.matdes.2015.06.149 ↗
28. Study about improving mechanism of electrical conductivity of AA1070Al treated by a novel composite boron treatment with trace Ti10.1016/j.jallcom.2021.159416 ↗
29. The improvement of boron treatment effificiency and electrical conductivity of AA1070Al achieved by trace Ti assistant10.1016/j.jallcom.2017.11.099 ↗
30. , Nucleation and growth of Fe-rich phases in Al-5Ti-1B modified Al-Fe alloys investigated using synchrotron X-ray imaging and electron microscopy10.1016/j.jmst.2020.12.011 ↗
31. Revealing the nucleation and growth mechanisms of Fe-rich phases in Al-Cu-Fe(-Si) alloys under the influence of Al-Ti-B10.1016/j.intermet.2022.107584 ↗
32. Removal of vanadium from molten Aluminum-Part I. Analysis of VB2 formation10.1007/s11663-013-9974-x ↗
33. Removal of vanadium from molten aluminum-Part II. kinetic analysis and mechanism of VB2 formation10.1007/s11663-013-9975-9 ↗
34. Removal of vanadium from molten aluminum-Part III. analysis of industrial boron treatment practice10.1007/s11663-013-0017-4 ↗