journal article·2023-03

Data-driven investigation of microstructure and surface integrity in additively manufactured multi-principal-element alloys

Jing Peng, Bin Liu, Weipeng Li, Peter K. Liaw, Jia Li, Qihong Fang

Publisher page

Abstract

The great variability of the additively manufactured quality is becoming a major challenge to limit its wide application. Here, we combine the high-throughput molecular dynamics simulations with the artificial neural network to search for the high surface quality and damage minimization of the selective laser melted (SLMed) FeCrNi multi-principal-element alloy (MPEA), based on the complex microstructure obtained from experiment characterization. By adjusting the laser scanning speed and laser power density, a large amount of data related to the surface roughness, dislocation characteristics, and residual stress in the SLMed MPEAs is obtained for optimizing the SLM process. Atomic simulation results show that there are various degrees of Cr segregation under different processing parameters, which leads to the uncertainty of residual stress distribution and dislocation characteristics. Thus, the surface roughness and subsurface damage is highly sensitive to the SLM parameters. According to the training results of the artificial neural network, the laser scanning speed plays a more key role in regulating the surface integrity and subsurface damage in the SLMed MPEAs. The overall prediction results exhibit that the relatively slow laser scanning speed effectively reduces the residual stress. Importantly, a complex relationship between the SLMed parameters and properties is built. The current work provides a predictive recommendation to optimize the quality and process design of the SLMed MPEAs with high surface integrity and low subsurface damage.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
2. Machine learning assisted investigation of defect influence on the mechanical properties of additively manufactured architected materials10.1016/j.ijmecsci.2022.107190 ↗
3. Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing10.1038/s41586-022-04914-8 ↗
4. Enhancing mechanical properties of dual-phase Al0. 5CoCrFeNiSi0. 25 high entropy alloy via thermomechanical treatment10.1016/j.jallcom.2022.166141 ↗
5. Solving oxygen embrittlement of refractory high-entropy alloy via grain boundary engineering10.1016/j.mattod.2022.02.006 ↗
6. The predicted rate-dependent deformation behaviour and multistage strain hardening in a model heterostructured body-centered cubic high entropy alloy10.1016/j.ijplas.2021.103073 ↗
7. Recent progress on the microstructure and properties of high entropy alloy coatings prepared by laser processing technology: a review10.1016/j.jmapro.2022.02.006 ↗
8. The use of high-entropy alloys in additive manufacturing10.1016/j.scriptamat.2014.11.037 ↗
9. Mechanical and corrosion properties of CoCrFeNiTi-based high-entropy alloy additive manufactured using selective laser melting
10. Segregation enabled outstanding combination of mechanical and corrosion properties in a FeCrNi medium entropy alloy manufactured by selective laser melting10.1016/j.jmst.2021.05.018 ↗
11. Improving surface integrity and corrosion resistance of additive manufactured Ti6Al4V alloy by cryogenic machining10.1007/s00170-019-04180-5 ↗
12. Machining-induced surface integrity of Inconel 718 alloy fabricated by powder bed fusion additive manufacturing under various laser processing parameters10.1080/10910344.2021.1998107 ↗
13. Surface integrity of machined additively manufactured Ti alloys10.1016/j.jmatprotec.2018.04.030 ↗
14. Advances in additive manufacturing process simulation: residual stresses and distortion predictions in complex metallic components10.1016/j.matdes.2020.108779 ↗
15. Numerical modeling of melt-pool behavior in selective laser melting with random powder distribution and experimental validation10.1016/j.jmatprotec.2017.11.032 ↗
16. Unraveling atomic-scale crystallization and microstructural evolution of a selective laser melted FeCrNi medium-entropy alloy10.1039/D0CE00358A ↗
17. Machine learning for design, phase transformation and mechanical properties of alloys10.1016/j.pmatsci.2021.100797 ↗
18. Combined first-principles and machine learning study of the initial growth of carbon nanomaterials on metal surfaces10.1016/j.apsusc.2022.152762 ↗
19. Machine learning assisted design of high entropy alloys with desired property10.1016/j.actamat.2019.03.010 ↗
20. Microstructure exploration and an artificial neural network approach for hardness prediction in AlCrFeMnNiWx high-entropy alloys10.1016/j.jallcom.2020.153766 ↗
21. Determination of the influence of processing parameters on the mechanical properties of the Ti–6Al–4V alloy using an artificial neural network10.1016/j.commatsci.2012.03.047 ↗
22. Vacancy dependent mechanical behaviors of high-entropy alloy10.1016/j.ijmecsci.2022.107065 ↗
23. Investigation of nanomachining-induced plastic behavior using machine learning-assisted high-throughput molecular dynamics simulations10.1007/s00170-022-08802-3 ↗
24. Machine learning in additive manufacturing: a review10.1007/s11837-020-04155-y ↗
25. Machine learning for advanced additive manufacturing10.1016/j.matt.2020.08.023 ↗
26. In-situ monitoring of melt pool images for porosity prediction in directed energy deposition processes10.1080/24725854.2017.1417656 ↗
27. Machine learning based fatigue life prediction with effects of additive manufacturing process parameters for printed SS 316L10.1016/j.ijfatigue.2020.105941 ↗
28. Atomic-scale structural evolution in selective laser melting of Cu50Zr50 metallic glass10.1016/j.commatsci.2018.03.072 ↗
29. Sensitivity analysis of material and process parameters in finite element modeling of selective laser melting of Inconel 62510.1007/s00170-015-8329-y ↗
30. LAMMPS-large-scale atomic/molecular massively parallel simulator
31. Visualization and analysis of atomistic simulation data with OVITO–the open visualization tool10.1088/0965-0393/18/1/015012 ↗
32. A property-oriented design strategy for high performance copper alloys via machine learning10.1038/s41524-019-0227-7 ↗
33. High-throughput simulation combined machine learning search for optimum elemental composition in medium entropy alloy10.1016/j.jmst.2020.08.008 ↗
34. Machine-learning phase prediction of high-entropy alloys10.1016/j.actamat.2019.03.012 ↗
35. High rate directional solidification and its application in single crystal superalloys10.1016/S1468-6996(01)00049-3 ↗
36. Formation process and mechanical properties in selective laser melted multi-principal-element alloys10.1016/j.jmst.2022.06.017 ↗
37. The cellular boundary with high density of dislocations governed the strengthening mechanism in selective laser melted 316L stainless steel10.1016/j.msea.2020.140279 ↗
38. Atomic-scale structural evolution in selective laser melting of Cu50Zr50 metallic glass10.1016/j.commatsci.2018.03.072 ↗
39. Selective laser melting of aluminum nano-powder particles, a molecular dynamics study
40. A novel supersaturated medium entropy alloy with superior tensile properties and corrosion resistance10.1016/j.scriptamat.2020.05.023 ↗
41. Processing parameter effects on residual stress and mechanical properties of selective laser melted Ti6Al4V10.1007/s11665-018-3477-5 ↗
42. FEM analysis of thermal and residual stress profile in selective laser melting of 316L stainless steel10.1016/j.jmapro.2021.03.040 ↗
43. Microstructure evolution characteristics of Inconel 625 alloy from selective laser melting to heat treatment10.1016/j.msea.2017.08.058 ↗
44. CoCr alloy processed by selective laser melting (SLM): effect of laser energy density on microstructure, surface morphology, and hardness10.1016/j.jmapro.2020.01.052 ↗
45. Vision based system for surface roughness characterisation of milled surfaces using speckle line images
46. Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction
47. As-fabricated surface morphologies of Ti-6Al-4V samples fabricated by different laser processing parameters in selective laser melting
48. Selective laser melting additive manufacturing of tungsten with niobium alloying: microstructure and suppression mechanism of microcracks10.1016/j.jallcom.2021.159879 ↗
49. Numerical modelling of the impact of energy distribution and Marangoni surface tension on track shape in selective laser melting of ceramic material
50. Influence of process parameters on surface roughness of aluminum parts produced by DMLS10.1007/s00170-012-4688-9 ↗
51. Selective laser melting of titanium parts: Influence of laser process parameters on macro-and microstructures and tensile property10.1016/j.powtec.2018.09.090 ↗