journal article·2023-03Open access

Study of the relationship between process parameters, volatility of Te, and physical properties in n-type Bi2Te3-based alloys for the reproducible fabrication of high-performance thermoelectric materials

Sung-Jin Jung, Sang-Soon Lim, Byeong-Hyeon Lee, Sung Ok Won, Hyung-Ho Park, Seong Keun Kim, Jin-Sang Kim, Seung-Hyub Baek

Abstract

Solid compounds containing volatile elements often deviate from the stoichiometric composition, owing to the loss of the volatile species during thermal processes. This leads to a wide range of properties reported for the nominally same materials. It is important to understand how the process parameters of each fabrication step affect the volatility of the element, and how the physical properties change with the altered stoichiometry. Herein, we address this issue in n-type thermoelectric Bi2Te3-based alloys containing volatile Te. Thermal analysis indicated that mechanical deformation enhanced the volatility of Te by inducing a eutectic reaction through the formation of Te-rich phases. The effective evaporation of Te from the eutectic liquid phase created point defects and micropores, which significantly affected the thermoelectric and physical properties of the specimens. Moreover, Te atoms were transferred from heavily deformed samples to lightly deformed samples along the chemical potential gradients of Te via the vapor phase during annealing. The post-annealing temperature was increased above the eutectic temperature by introducing a pre-annealing step, which suppressed the formation of micropores. Therefore, we fabricated high-density n-type Bi2Te3-based alloys with a thermoelectric figure-of-merit (zTmax) of approximately 1.1, whose performance at the module level exceeded those of commercial single-crystal counterparts. This study provides a comprehensive relationship between the process parameters, Te volatility, and physical properties of Bi2Te3-based alloys. Our results offer an insight for the reproducibly and tuning of physical properties of other compounds containing volatile elements other than Bi2Te3.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Kang · 2004
2. Deposition of the tin sulfide thin films using ALD and a vacuum annealing process for tuning the phase transition10.1016/j.jallcom.2021.162806 ↗
3. Effects of hot pressing temperature and annealing temperature on microstructure and compressive properties of a bulk nanocrystalline AZ61 magnesium alloy contain Ti10.1016/j.jallcom.2021.161533 ↗
4. Design and development of Co35Cr5Fe20−xNi20+xTi20 high entropy alloy with excellent magnetic softness
5. Self-lubricating behavior caused by tribo-oxidation of Ti3SiC2/Cu composites in a wide temperature range10.1016/j.ceramint.2022.02.084 ↗
6. Suppressing charged cation antisites via Se vapor annealing enables p-type dopability in AgBiSe2–SnSe thermoelectrics
7. Sintering of Ge-Sb-Se chalcogenide glass powder by tube furnace and spark plasma methods10.1016/j.jnoncrysol.2021.120723 ↗
8. Exploring point defects and trap states in undoped SrTiO3 single crystals10.1016/j.jeurceramsoc.2021.10.010 ↗
9. Mechanochemically synthesized SnS nanocrystals: Impact of nonstoichiometry on phase purity and solar cell performance10.1021/acssuschemeng.7b02711 ↗
10. Processing high-performance thermoelectric materials in a green way: a proof of concept in cold sintered PbTe0.94Se0.0610.1021/acsami.2c09065 ↗
11. Effect of sintering time on the structural and magnetocaloric properties of Mn-Fe-P-Si-Ge-B alloys prepared by spark plasma sintering10.1016/j.jallcom.2022.166365 ↗
12. Influence of sintering temperature on microstructure of Na0.5Bi0.5TiO3 ceramics10.1016/j.jallcom.2021.160955 ↗
13. Liquid phase sintering10.1007/s10853-008-3008-0 ↗
14. Thermodynamics-guided alloy and process design for additive manufacturing
15. Thermoelectric properties and thermal stability of metal-doped cuprous sulfide thermoelectrics10.1016/j.jeurceramsoc.2022.09.030 ↗
16. An over 10% module efficiency obtained using non-Bi2Te3 thermoelectric materials for recovering heat of<600 K10.1039/D1EE02253A ↗
17. Cold-sintered Bi2Te3‑based materials for engineering nanograined thermoelectrics10.1021/acsaem.1c03540 ↗
18. High-Entropy-stabilized Chalcogenides With High Thermoelectric Performance10.1126/science.abe1292 ↗
19. Thermoelectric cooling materials10.1038/s41563-020-00852-w ↗
20. Clarification of electronic and thermal transport properties of Pb-, Ag-, and Cu-doped p-type Bi0.52Sb1.48Te310.1016/j.jallcom.2018.09.099 ↗
21. Topological insulator Bi2Te3: the effect of doping with elements from the VIII B column of the periodic table10.1021/acs.jpcc.2c02724 ↗
22. Synergistic effect of Zn doping on thermoelectric properties to realize a high figure-of-merit and conversion efficiency in Bi2−xZnxTe3 based thermoelectric generators10.1039/D1TC06118F ↗
23. Mediating point defects endows n-type Bi2Te3 with high thermoelectric performance and superior mechanical robustness for power generation application10.1002/smll.202201352 ↗
24. Ultra-fast fabrication of Bi2Te3 based thermoelectric materials by flash-sintering at room temperature combining with spark plasma sintering10.1038/s41598-022-14405-5 ↗
25. Antisite defect manipulation enables the high thermoelectric performance of p-type Bi2−xSbxTe3 alloys for solid-state refrigeration
26. Thermoelectric property studies on Cu‐doped n‐type CuxBi2Te2.7Se0.3 nanocomposites10.1002/aenm.201100149 ↗
27. Free-electron creation at the 60 twin boundary in Bi2Te310.1038/ncomms12449 ↗
28. Ultralow thermal conductivity in dual-doped n-type Bi2Te3 material for enhanced thermoelectric properties10.1002/aelm.202000910 ↗
29. Point defect engineering: co-doping synergy realizing superior performance in n-Type Bi2Te3 thermoelectric materials10.1002/smll.202101328 ↗
30. Boron-mediated grain boundary engineering enables simultaneous improvement of thermoelectric and mechanical properties in N-type Bi2Te3
31. Tunable electrical conductivity and simultaneously enhanced thermoelectric and mechanical properties in n-type Bi2Te310.1002/advs.202203250 ↗
32. Oxidation of thermoelectric Bi2Te3-based alloys by atomic layer deposition of Ru metal10.1016/j.matlet.2022.132321 ↗
33. Removing the oxygen-induced donor-like effect for high thermoelectric performance in n‑type Bi2Te3‑based compounds10.1021/acsami.1c19357 ↗
34. The effect of powder pre-treatment on the mechanical and thermoelectric properties of spark plasma sintered N-type bismuth telluride10.1016/j.jallcom.2021.159782 ↗
35. Spontaneous solid-state foaming of nanocrystalline thermoelectric compounds at elevated temperatures10.1016/j.nanoen.2017.04.018 ↗
36. Thermal stability and mechanical response of Bi2Te3‑based materials for thermoelectric applications10.1021/acsaem.9b02093 ↗
37. Impurity-free, mechanical doping for the reproducible fabrication of the reliable n-type Bi2Te3-based thermoelectric alloys10.1016/j.actamat.2018.02.061 ↗
38. Strain-assisted, low-temperature synthesis of high-performance thermoelectric materials10.1039/c3cp54969k ↗
39. Impact of parasitic thermal effects on thermoelectric property measurements by Harman method10.1063/1.4870413 ↗
40. Enantioselective control of lattice and shape chirality in inorganic nanostructures using chiral biomolecules10.1038/ncomms5302 ↗
41. Bi-In-Te phase diagram10.1016/j.jallcom.2017.06.144 ↗
42. Experimental reinvestigation and thermodynamic description of Bi-Te binary system10.1016/j.calphad.2017.11.007 ↗
43. Point defect engineering of high‐performance bismuth‐telluride‐based thermoelectric materials10.1002/adfm.201400474 ↗
44. Thermoelectric properties of p-type antimony bismuth telluride alloys prepared by cold pressing10.1016/S0025-5408(96)00149-3 ↗
45. Chemical vapor transport reactions – a historical review
46. MoTe2: semiconductor or semimetal?10.1021/acsnano.1c01816 ↗
47. Substitutionally doped MoSe2 for high-performance electronics and optoelectronics10.1002/smll.202102855 ↗
48. Tuning electrical and optical properties of MoSe2 transistors via elemental doping10.1002/admt.202000307 ↗
49. Bi2Te3 single crystals with high room-temperature thermoelectric performance enhanced by manipulating point defects based on first principles calculation10.1039/C9RA01738K ↗
50. Topologically-enhanced thermoelectric properties in Bi2Te3‑based compounds: effects of grain size and misorientation10.1021/acsami.2c12843 ↗
51. Thermoelectric properties of hydrothermally synthesized and hot pressed n-type Bi2Te3 alloys with different contents of Te10.1016/j.mseb.2004.11.001 ↗
52. Enhancement in thermoelectric figure of merit in nanostructured Bi2Te3 with semimetal nanoinclusions10.1002/aenm.201100338 ↗
53. Structural defects and electronic properties of the Cu-doped topological insulator Bi2Se3
54. Enhancement of thermoelectric properties in n-type Cu0.01Bi2Te2.3+ xSe0. 7 (0≤ x≤ 0.7) compounds with Te-excess10.1007/s13391-018-0021-6 ↗
55. Te-rich Bi2Te3 thin films by electron− beam deposition: structural, electrical, optical and thermoelectric properties10.1016/j.tsf.2020.138355 ↗
56. Simultaneous regulation of electrical and thermal transport properties of N-type Bi2Te3 via adding excessive Te followed by Se doping10.1021/acsaem.1c00546 ↗
57. Characterization of Lorenz number with Seebeck coefficient measurement10.1063/1.4908244 ↗
58. Porous organic filler for high efficiency of flexible thermoelectric generator10.1016/j.nanoen.2020.105604 ↗