A simple and efficient strategy to construct Li-rich layered materials with surface layered/spinel heterostructures
Source abstract
Abstract
In Li-rich layered oxides cathode materials (LR materials), spinel structure was widely introduced to suppress the structure attenuation and voltage decline during cycling. In this study, LR materials with surface layered/spinel heterostructures have been fabricated by a simple high-temperature post-treatment method. The existence of the surface spinel structure in synthesized materials was verified via X-ray diffraction, Raman spectra, and transmission electron microscopy. Moreover, the synthesized materials demonstrated remarkable electrochemical performance, especially their cycling performance. After optimization, the LR-850 samples showed the best electrochemical performances, that is, the capacity retentions are 126.97% at 1 C after 200 cycles and 92.2% at 5 C after 700 cycles, and the discharge-specific capacities are 139.6 mAh·g −1 at 5 C and 111 mAh·g −1 at 10 C, respectively. These electrochemical properties improvements are attributed to the introduction of the surface spinel structure in LR materials which could enhance the structural stability and provide 3D lithium ion diffusion paths.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Towards high-energy-density lithium-ion batteries: Strategies for developing high-capacity lithium-rich cathode materials10.1016/j.ensm.2020.11.008 ↗
2. Mechanism of structural change and the trigger of electrochemical degradation of Li-rich layered oxide cathodes during charge-discharge cycles10.1021/acsaem.9b01595 ↗
3. Systematic study of the effects of lithium deficiencies on the crystal structure and electrochemical performance of Li-rich materials10.1016/j.jallcom.2021.163549 ↗
4. Enhanced electrochemical performances of cerium-doped Li-Rich Li1.2Ni0.13Co0.13Mn0.54O2 cathode materials10.1016/j.jallcom.2020.158000 ↗
5. Niobium doping of Li1.2Mn0.54Ni0.13Co0.13O2 cathode materials with enhanced structural stability and electrochemical performance10.1016/j.ceramint.2020.06.152 ↗
6. Improved cycling stability of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode materials by optimizing Ti doping10.1142/S1793604721500028 ↗
7. Toward the performance evolution of lithium-ion battery upon impact loading10.1016/j.electacta.2022.141192 ↗
8. Surface analysis of LiMn2O4 electrodes in carbonate-based electrolytes10.1149/1.1426398 ↗
9. LiFePO4/Carbon Nanomaterial Composites for Cathodes of High-Power Lithium Ion Batteries10.1134/S0020168521060108 ↗
10. Tuning Primary Particle Growth of Li1.2Ni0.2Mn0.6O2 by Nd-Modification for Improving the Electrochemical Performance of Lithium Ion Batteries10.1021/acssuschemeng.8b06005 ↗
11. Unraveling the Voltage Decay Phenomenon in Li-Rich Layered Oxide Cathode of No Oxygen Activity10.1002/aenm.201902258 ↗
12. Degradation modes and mechanisms analysis of lithium-ion batteries with knee points10.1016/j.electacta.2022.141143 ↗
13. Revealing the role of spinel phase on Li-rich layered oxides: A review10.1016/j.cej.2021.131978 ↗
14. In Situ Reconstruction of the Spinel Interface on a Li-Rich Layered Cathode Material with Enhanced Electrochemical Performances through HEPES and Heat Treatment Strategy10.1021/acssuschemeng.1c07221 ↗
15. Ultrathin spinel membrane-encapsulated layered lithium-rich cathode material for advanced Li-ion batteries10.1021/nl501164y ↗
16. The Effect of Interdiffusion on the Properties of Lithium-Rich Core-Shell Cathodes10.1149/2.1231613jes ↗
17. An Ion-Exchange Promoted Phase Transition in a Li-Excess Layered Cathode Material for High-Performance Lithium Ion Batteries10.1002/aenm.201401937 ↗
18. Improving the electrochemical performance of layered lithium-rich cathode materials by fabricating a spinel outer layer with Ni3+10.1039/C5TA00009B ↗
19. Enhanced Rate Performance of Al-Doped Li-Rich Layered Cathode Material via Nucleation and Post-solvothermal Method10.1021/acssuschemeng.7b03634 ↗
20. An Ultra-Long-Life Lithium-Rich Li1.2Mn0.6Ni0.2O2 Cathode by Three-in-One Surface Modification for Lithium-Ion Batteries10.1002/anie.202000628 ↗
21. Modulating the Voltage Decay and Cationic Redox Kinetics of Li-Rich Cathodes via Controlling the Local Electronic Structure
22. Al/Ti synergistic doping enhanced cycle stability of Li-rich layered oxides
23. Promoting the electrochemical performance of Li-rich layered Li1.2(Ni1/6Co1/6Mn4/6)0.8O2 with the in situ transformed allogenic spinel phase10.1021/acssuschemeng.9b05664 ↗
24. Strategy toward the precise regulation of initial coulombic efficiency of Li-rich mn-based cathode materials10.1002/adma.202103173 ↗
25. A Raman-based investigation of the fate of Li2MnO3 in lithium- and manganese-rich cathode materials for lithium ion batteries10.1149/2.0631507jes ↗
26. Layered/spinel heterostructured and hierarchical micro/nanostructured li-rich cathode materials with enhanced electrochemical properties for Li-ion batteries10.1021/acsami.7b04726 ↗
27. Synergetic effect of high Ni ratio and low oxygen defect interface zone of single crystals on the capacity retention of lithium-rich layered oxides10.1016/j.jcis.2021.03.038 ↗
28. Insight of high nickel Li-rich cathode materials for wide temperature operation10.1016/j.jallcom.2020.155517 ↗
29. Understanding electrochemical performance improvement with Nb doping in lithium-rich manganese-based cathode materials10.1016/j.jpowsour.2020.228185 ↗
30. Enhanced high-temperature performance of Li-rich layered oxide via surface heterophase coating10.1016/j.jechem.2020.03.033 ↗
31. Synthesis of Li-rich layers/spinel/carbon composite cathode materials with phenol formaldehyde resin and its electrochemical performance
32. Effect of extra lithium amount on the structure and electrochemical properties of Li-rich manganese-based cathode material of Li1.2+xNi0.1Co0.2Mn0.5O2
33. Adorned Li-rich Li1.2Ni0.13Co0.13Mn0.54O2 with LiAlO2 for improved electrochemical properties in lithium-ion batteries10.1007/s11581-019-03115-0 ↗
34. Understanding the rate capability of high-energy-density Li-rich layered Li1.2Ni0.15Co0.1 Mn0.55O2 cathode materials10.1002/aenm.201300950 ↗
35. High-voltage, high-energy layered-spinel composite cathodes with superior cycle life for lithium-ion batteries10.1021/cm2034992 ↗
36. Investigation on the electrochemical activation process of Li1.20Ni0.32Co0.004Mn0.476O210.1016/j.pnsc.2014.07.005 ↗
37. Stable layered-layered-spinel structure of the Li1.2Ni0.13Co0.13Mn0.54O2 cathode synthesized by ball-milling assisted solid-state method10.1016/j.jelechem.2022.116050 ↗
38. Insight into the effect of Nb5+ on the crystal structure and electrochemical performance of the Li-rich cathode materials10.1016/j.jelechem.2022.116762 ↗