journal article·2023-01

Effect of Ag NPs-decorated carbon nanowalls with integrated Ni-Cr alloy microheater for sensing ammonia and nitrogen dioxide gas

Seokhun Kwon, Chulsoo Kim, Kangmin Kim, Hosung Jung, Hyunil Kang

Publisher page

Abstract

Carbon nanowalls (CNWs), which have high mobility, high surface area and high porosity, generally have high potential as gas sensing materials, but poor gas detection performance has been reported due to low response and recovery. To enhance the sensing performance of a chemiresistive gas sensor based on CNWs, a metallic catalyst and micro heating system have been used. Ag NPs were decorated onto CNWs patterned for fabrication of a gas sensor platform with microheater. Diverse characteristics of functionalized CNWs by Ag NPs were investigated via scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and Raman spectroscopy. Ag NPs or clusters were optically observed among a significant number of pores on the surface of CNWs, resulting in change in pore size. Also, a certain evidence of Ag NPs was demonstrated by surface-enhanced Raman scattering (SERS), causing a positive and negative shift in the Raman band of CNWs. In terms of gas-sensing performance, a greater amount of Ag NPs showed highly improved sensing signal for NH 3 and NO 2 gas from 25 to 100 ppm compared to pristine conditions. The microheater also improved the poor recovery rate of CNWs. Consequently, the combined gas sensing platform with metallic catalyst and microheating system showed significantly enhanced gas sensing performance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Electrochemical sensors and biosensors · Analytical Chemistry and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Nanomaterials based electrochemical sensor and biosensor platforms for environmental applications10.1016/j.teac.2017.02.001 ↗
2. Chemoresistive gas sensor based on ZIF-8/ZIF-67 nanocrystals10.1016/j.snb.2018.07.137 ↗
3. Fluorescence sensor array based on amino acid derived carbon dots for pattern-based detection of toxic metal ions10.1016/j.snb.2016.09.186 ↗
4. Red emissive sulfur, nitrogen codoped carbon dots and their application in ion detection and theraonostics10.1021/acsami.7b04514 ↗
5. Carbon nanocoil-based fast-response and flexible humidity sensor for multifunctional applications10.1021/acsami.8b18599 ↗
6. Porous ZnFe2O4 nanorods with net-worked nanostructure for highly sensor response and fast response acetone gas sensor10.1016/j.snb.2017.03.119 ↗
7. 1D metal oxide semiconductor materials for chemiresistive gas sensors: a review10.1002/aelm.202100271 ↗
8. Room temperature operatable high sensitive toluene gas sensor using chemiresistive Ag/Bi2O3 nanocomposite
9. Selective ppb-level ozone gas sensor based on hierarchical branch-like In2O3 nanostructure10.1016/j.snb.2021.129612 ↗
10. Design of a metal-oxide solid solution for sub-ppm H2 detection10.1021/acssensors.1c02481 ↗
11. Sb incorporated SnO2 nanostructured thin films for CO2 gas sensing and humidity sensing applications10.1016/j.jallcom.2022.164053 ↗
12. High performance acetone gas sensor based on ultrathin porous NiO nanosheet10.1016/j.snb.2022.132143 ↗
13. ZnO coral-like nanoplates decorated with Pd nanoparticles for enhanced VOC gas sensing10.1016/j.jsamd.2021.05.005 ↗
14. Sensitive and low-power metal oxide gas sensors with a low-cost microelectromechanical heater10.1021/acsomega.0c04340 ↗
15. Synergistic integration of chemo-resistive and SERS sensing for label-free multiplex gas detection10.1002/adma.202105199 ↗
16. Preparation and study of ammonia gas sensor based on ZnO/CuO heterojunction with high performance at room temperature10.1016/j.mssp.2022.106700 ↗
17. High sensitive room temperature NO2 gas sensor based on the avalanche breakdown induced by Schottky junction in TiO2-Sn3O4 nanoheterojunctions10.1016/j.jallcom.2022.165079 ↗
18. Highly sensitive flexible NH3 sensors based on printed organic transistors with fluorinated conjugated polymers10.1021/acsami.6b14220 ↗
19. One-minute fish freshness evaluation by testing the volatile amine gas with an ultrasensitive porous-electrode-capped organic gas sensor system10.1021/acssensors.6b00829 ↗
20. Ultrasensitive flexible NO2 gas sensors via multilayer porous polymer film10.1016/j.snb.2022.132113 ↗
21. A room temperature hydrogen sulfide gas sensor based on electrospun polyaniline-polyethylene oxide nanofibers directly written on flexible substrates10.1039/C6RA20710C ↗
22. A review on graphene-based gas/vapor sensors with unique properties and potential applications10.1007/s40820-015-0073-1 ↗
23. Three-dimensional gold nanoparticles-modified graphene hydrogel for high-sensitive NO2 and NH3 detection with enhanced resistance to humidity10.1016/j.snb.2021.130259 ↗
24. Room temperature gas sensor application of carbon nanowalls using electrical resistance change by surface adsorption of toxic gases10.1016/j.materresbull.2021.111377 ↗
25. Controlled self-assembly of plasmon-based photonic nanocrystals for high performance photonic technologies10.1016/j.nantod.2020.101072 ↗
26. 3D Layer-By-Layer Pd-containing nanocomposite platforms for enhancing the performance of hydrogen sensors10.1021/acssensors.0c00211 ↗
27. High-performance Schottky diode gas sensor based on the heterojunction of three-dimensional nanohybrids of reduced graphene oxide–vertical ZnO nanorods on an AlGaN/GaN layer10.1021/acsami.7b06461 ↗
28. Understanding the noble metal modifying effect on In2O3 nanowires: highly sensitive and selective gas sensors for potential early screening of multiple diseases10.1039/C9NH00404A ↗
29. Innovative nanosensor for disease diagnosis10.1021/acs.accounts.7b00047 ↗
30. A gas sensor based on Ag-modified ZnO flower-like microspheres: temperature-modulated dual selectivity to CO and CH4
31. Gas sensing behavior of ZnO toward H2 at temperatures below 300°C and its dependence on humidity and Pt-decoration10.1016/j.apsusc.2020.148551 ↗
32. In2O3 nanoparticles decorated ZnO hierarchical structures for n-butanol sensor10.1021/acsanm.0c00025 ↗
33. Highly effective and stable MWCNT/WO3 nanocatalyst for ammonia gas sensing, photodegradation of ciprofloxacin and peroxidase mimic activity
34. SnO2 clusters embedded in TiO2 nanosheets: heterostructures and gas sensing performance10.1016/j.snb.2022.131433 ↗
35. A low-power embedded poly-Si micro-heater for gas sensor platform based on a FET transducer and its application for NO2 sensing10.1016/j.snb.2021.129642 ↗
36. Sensing platform of PdO-ZnO-In2O3 nanofibers using MOF templated catalysts for trimethylamine detection10.1016/j.snb.2021.130126 ↗
37. Three-dimensional porous carbon/nitrogen framework-decorated palladium nanoparticles for stable and wide-concentration-range hydrogen sensing10.1021/acsami.1c24190 ↗
38. Fabrication of flexible metal-nanoparticle films using graphene oxide sheets as substrates10.1002/smll.200900548 ↗
39. Facile one-pot synthesis of highly stable graphene-Ag0 hybrid nanostructures with enhanced optical properties10.1021/acs.jpcc.7b04059 ↗
40. Interaction between metal and graphene: dependence on the layer number of graphene10.1021/nn103004c ↗
41. High areal capacitance of n-doped graphene synthesized by arc discharge10.1002/adfm.201905511 ↗
42. Influence of Ti and Cr adhesion layers on ultrathin au films10.1021/acsami.7b10136 ↗
43. Growth of vertical graphene materials by an inductively coupled plasma with solid-state carbon sources10.1016/j.carbon.2020.10.072 ↗
44. Facile preparation of polypyrrole-reduced graphene oxide hybrid for enhancing NH3 sensing at room temperature10.1016/j.snb.2016.10.047 ↗
45. Visible light enhancement of ammonia detection using silver nanoparticles decorated on reduced graphene oxide
46. Influence of the catalytic introduction procedure on the nano-SnO2 gas sensor performances: where and how stay the catalytic atoms?10.1016/S0925-4005(01)00854-1 ↗
47. Room-temperature ammonia gas sensor based on reduced graphene oxide nanocomposites decorated by Ag, Au and Pt nanoparticles10.1016/j.jallcom.2017.06.152 ↗
48. Gas sensing with au-decorated carbon nanotubes10.1021/nn200294h ↗
49. Preparation of Ag nanoparticles-SnO2 nanoparticles-reduced graphene oxide hybrids and their application for detection of NO2 at room temperature10.1016/j.snb.2015.09.027 ↗
50. High-performance chemiresistor-type NH3 gas sensor based on three-dimensional reduced graphene oxide/polyaniline hybrid10.1088/1361-6528/ab9daa ↗
51. Atomic layer deposition of titanium dioxide on multi-walled carbon nanotubes for ammonia gas sensing10.1016/j.surfcoat.2019.04.031 ↗
52. Hydrothermally synthesized MoS2-multi-walled carbon nanotube composite as a novel room-temperature ammonia sensing platform10.1016/j.apsusc.2020.147373 ↗
53. Synthesis, characterization and gas sensing properties of ZnO-decorated MWCNTs10.1016/j.apsusc.2017.03.290 ↗
54. Three-dimensional mesoporous graphene aerogel-supported SnO2 nanocrystals for high-performance NO2 gas sensing at low temperature10.1021/ac503234e ↗
55. Enhanced NO2 gas sensor device based on supramolecularly assembled polyaniline/silver oxide/graphene oxide composite10.1016/j.ceramint.2021.05.296 ↗
56. Sulfonated graphene anchored with tin oxide nanoparticles for detection of nitrogen dioxide at room temperature with enhanced sensing performances10.1016/j.snb.2016.01.023 ↗
57. A high-performance flexible NO2 sensor based on WO3 NPs decorated on MWCNTs and RGO hybrids on PI/PET substrates10.1016/j.snb.2015.10.088 ↗
58. Enhancing room-temperature NO2 sensing properties via forming heterojunction for NiO-rGO composited with SnO2 nanoplates10.1016/j.snb.2016.12.062 ↗
59. Decoration of vertical graphene with tin dioxide nanoparticles for highly sensitive room temperature formaldehyde sensing10.1016/j.snb.2017.10.043 ↗