A facile synthesis of Inconel718-GNSs composites with high strength via spark plasma sintering
Source abstract
Abstract
Innovations in the production process and second phase strengthening are commonly used to improve mechanical performances of nickel-based superalloys. Herein, a facile strategy for preparing graphene nanosheets-Inconel718 (IN718-GNSs) composites by three-dimensional (3D) rock-milling and spark plasma sintering (SPS) at 1100 ℃ was investigated. It is found that the fabricated IN718–0.3GNSs composites have remarkable mechanical properties. The microhardness and compressive yield strength of the IN718–0.3GNSs composite were 13.0% and 9.54% respectively higher than the cast Inconel718 alloy. Furthermore, the results showed that high temperature creep dominated the densification mechanism of SPS based on densification kinetics and a high relative density. The results also demonstrated that the strengthening mechanism of IN718-GNSs composites was mainly attributed to dislocation strengthening, grain refinement, and load transfer, in which load transfer dominates. It anticipates that this strategy can open an opportunity to induce graphene with high structural integrity by simple and economical preparation and promote the development of graphene reinforced other metal matrix composites and beyond.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Differential thermal analysis of several single crystal and directionally solidified superalloys
2. Microtwinning and other shearing mechanisms at intermediate temperatures in Ni-based superalloys10.1016/j.pmatsci.2009.03.010 ↗
3. Electric field effect in atomically thin carbon films10.1126/science.1102896 ↗
4. Overview of the development of fibre metal laminates10.1023/A:1025533701806 ↗
5. Processing of discontinuously-reinforced metal matrix composites by rapid solidification10.1016/0079-6425(95)00003-8 ↗
6. Spark plasma sintering mechanisms at the necks between TiAl powder particles10.1016/j.actamat.2016.07.043 ↗
7. Enhanced mechanical properties of graphene/copper nanocomposites using a molecular-level mixing process10.1002/adma.201302495 ↗
8. Strengthening mechanism in graphene nanoplatelets reinforced aluminum composite fabricated through spark plasma sintering10.1016/j.msea.2017.04.009 ↗
9. Fundamental Aspects of Spark Plasma Sintering: I. Experimental Analysis of Scalability10.1111/j.1551-2916.2012.05203.x ↗
10. Effects of graphene content on the microstructure and properties of copper matrix composites10.1016/j.carbon.2015.10.023 ↗
11. Fast and easy preparation of few-layered-graphene/magnesia powders for strong, hard and electrically conducting composites10.1016/j.carbon.2018.04.085 ↗
12. In situ generation of 3D graphene-like networks from cellulose nanofibres in sintered ceramics10.1039/C8NR00717A ↗
13. Fabricating graphene nanoplatelets/nickel composites of balanced strength and ductility10.1016/j.matchemphys.2021.124254 ↗
14. Sintering in gas discharges10.1038/2171287a0 ↗
15. Impact of thermal diffusion on densification during SPS10.1111/j.1551-2916.2008.02705.x ↗
16. Microstructure and mechanical properties of nickel strengthened by Y2O3 through rock-milling and spark plasma sintering10.1016/j.jallcom.2018.04.067 ↗
17. Effects of temperature on microstructure and mechanical properties of IN718 reinforced by reduced graphene oxide through spark plasma sintering10.1016/j.jallcom.2018.07.071 ↗
18. Microstructure and mechanical properties of Y2O3 reinforced Ti6Al4V composites fabricated by spark plasma sintering10.1016/j.jallcom.2018.07.229 ↗
19. Reinforcement with graphene nanosheets in aluminum matrix composites10.1016/j.scriptamat.2012.01.012 ↗
20. Advances in graphene reinforced metal matrix nanocomposites: Mechanisms, processing, modelling, properties and applications10.1016/j.npe.2020.12.003 ↗
21. Dynamic behavior and a modified Johnson–Cook constitutive model of Inconel 718 at high strain rate and elevated temperature10.1016/j.msea.2013.05.062 ↗
22. Strengthening mechanisms in carbon nanotube-reinforced aluminum composites10.1016/j.carbon.2015.08.112 ↗
23. Different growth behaviors of ambient pressure chemical vapor deposition graphene on Ni(111) and Ni films: A scanning tunneling microscopy study10.1007/s12274-012-0221-6 ↗
24. The thermal expansion of pure metals: copper, gold, aluminum, nickel, and iron10.1103/PhysRev.60.597 ↗
25. The thermal expansion coefficient of graphite parallel to the basal planes10.1016/0008-6223(72)90059-0 ↗
26. An overview of the recent developments in metal matrix nanocomposites reinforced by graphene10.3390/ma12172823 ↗
27. High temperature mechanical behavior of AZ61 magnesium alloy reinforced with graphene nanoplatelets10.1016/j.matdes.2015.10.101 ↗
28. Study on microstructure and mechanical properties of laser rapid forming Inconel 71810.1016/j.msea.2007.05.079 ↗
29. Interface engineering of graphene/copper matrix composites decorated with tungsten carbide for enhanced physico-mechanical properties10.1016/j.carbon.2020.10.091 ↗
30. Microstructure and thermal properties of diamond/copper composites with Mo2C in-situ nano-coating10.1016/j.surfcoat.2018.12.116 ↗
31. Formation of the orientation relationship-dependent interfacial carbide in Al matrix composite affected by architectured carbon nanotube10.1016/j.actamat.2022.117758 ↗
32. Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets10.1016/j.mser.2013.08.001 ↗
33. Samsonov · 2012
34. INCONEL 718: A solidification diagram10.1007/BF02650300 ↗
35. Effects of Y2O3 on the microstructure and mechanical properties of spark plasma sintered fine-grained W-Ni-Mn alloy10.1016/j.jre.2017.04.007 ↗
36. Cyclic Deformation Behavior of Fe-18Cr-18Mn-0.63N Nickel-Free High-Nitrogen Austenitic Stainless Steel10.1007/s11661-015-2769-8 ↗
37. Strengthening mechanisms in polycrystalline multimodal nickel-base superalloys10.1007/s11661-009-9858-5 ↗
38. Effect of twin boundaries on the microstructure and mechanical properties of Inconel 625 alloy10.1016/j.msea.2019.138361 ↗
39. D. Levasseur, The effect of green density, heating rate and pressure during sintering of inconel 718, McGill University (Canada), 2015.
40. Thermo-mechanical improvement of Inconel 718 using ex situ boron nitride-reinforced composites processed by laser powder bed fusion10.1038/s41598-017-14713-1 ↗
41. Kinetic analysis for high-temperature coarsening of gamma’’ phase in ni-based superalloy GH4169
42. Influence of deformation level on microstructure and creep behavior of GH4169 alloy10.1016/j.msea.2012.04.065 ↗
43. Investigations of γ′, γ″ and δ precipitates in heat-treated Inconel 718 alloy fabricated by selective laser melting10.1016/j.matchar.2018.01.006 ↗
44. Spark plasma sintering as advanced PM sintering method10.1179/003258902225007041 ↗
45. Trends in advanced SPS spark plasma sintering systems and technology functionally gradient materials and unique synthetic processing methods from next generation of powder technology10.4164/sptj.30.11_790 ↗
46. Spark plasma sintering of alumina10.1111/j.1151-2916.2002.tb00381.x ↗
47. Spark plasma sintering of a commercially available granulated zirconia powder: I. Sintering path and hypotheses about the mechanism(s) controlling densification10.1016/j.actamat.2007.01.048 ↗
48. Kinetics of densification in stabilized zirconia10.1016/0167-2738(84)90086-9 ↗
49. Synthesis and properties of bulk graphene nanoplatelets consolidated by spark plasma sintering10.1016/j.carbon.2012.04.054 ↗
50. Effects of cold rolling on the precipitation kinetics and the morphology evolution of intermediate phases in Inconel 718 alloy10.1016/j.jallcom.2015.07.149 ↗
51. Precipitation behavior during high-temperature isothermal compressive deformation of Inconel 718 alloy10.1016/j.msea.2016.09.088 ↗
52. Tailoring of the Microstructure of Laser Powder Bed Fused Inconel 718 Using Solution Annealing and Aging Treatments10.3390/met11060921 ↗
53. Laser powder deposition of carbon nanotube reinforced nickel-based superalloy Inconel 71810.1016/j.carbon.2016.06.014 ↗
54. Comparison of characterization methods for differently atomized nickel-based alloy 625 powders10.1016/j.powtec.2018.04.014 ↗
55. Influence of powder properties on densification mechanism during spark plasma sintering10.1016/j.scriptamat.2017.06.034 ↗
56. Densification mechanism of Ti-based metallic glass powders during spark plasma sintering process10.1016/j.intermet.2015.06.010 ↗
57. Hot pressing and spark plasma sintering of alumina: Discussion about an analytical modelling used for sintering mechanism determination10.1016/j.scriptamat.2014.04.013 ↗
58. Hot-isostatic pressing diagrams - new developments10.1016/0001-6160(85)90177-4 ↗
59. Densification mechanisms of spark plasma sintering: multi-step pressure dilatometry10.1007/s10853-012-6515-y ↗
60. Hot-pressing of magnesium aluminate spinel-I. Kinetics and densification mechanism10.1016/S1359-6454(98)00400-5 ↗
61. Particle rearrangement in solid state sintering
62. Intensive particle rearrangement in the early stage of spark plasma sintering process10.1016/j.jascer.2015.02.004 ↗
63. Preparation of Transparent 3Y-TZP Nanoceramics with No Low-Temperature Degradation10.1111/jace.12919 ↗
64. Dynamic pore coalescence in nanoceramic consolidated by two-step sintering procedure10.1016/j.jeurceramsoc.2013.03.015 ↗
65. Preparation of transparent nanoceramics by suppressing pore coalescence10.1111/j.1551-2916.2011.04829.x ↗
66. Consolidation enhancement in spark-plasma sintering: Impact of high heating rates10.1063/1.2822189 ↗
67. Graphene nanosheets-Inconel 718 nanocomposites fabricated by spark plasma sintering of in-situ grown vertically standing graphene nanosheets-Inconel 718 powders10.1049/mnl.2018.5628 ↗
68. Interface evolution and superior tensile properties of multi-layer graphene reinforced pure Ti matrix composite10.1016/j.matdes.2017.12.016 ↗
69. Strengthening enhanced by Ru partitioned to γ' phases in advanced Nickel-based single crystal superalloys10.1016/j.matchar.2022.111809 ↗
70. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
71. Effect of grain refinement and twin structure on the strength and ductility of Inconel 625 alloy10.1016/j.msea.2021.141739 ↗