journal article·2022-12

Achieving high performance in (NiTi2 + TiC)/Ti composites with network architecture via reaction interface design

Yuxin Ge, Hongmei Zhang, Xingwang Cheng, Qunbo Fan, Zhaohui Zhang, Xiaonan Mu, Liang Liu, Ke Feng

Publisher page

Abstract

For the development of discontinuously reinforced titanium matrix composites (DRTMCs), tailoring the reinforcement network distribution has demonstrated significant advantages in alleviating the conflict between strength and ductility. In the present work, network structured titanium matrix composites reinforced with feathery NiTi 2 and TiC nanoparticles were successfully prepared via an in-situ processing strategy. The introduction of C and Ni into the Ti matrix was achieved by electroless nickel plating of graphene nanosheets (GNFs) and a short-time ball milling process. The investigations of microstructure revealed that the 3D network architecture gradually formed with the increase of the reinforcement content, and the in-situ generated feathery NiTi 2 was tightly connected to the TiC nanoparticles and grown into the Ti matrix. However, when the nickel content is too high, the 3D network architecture was replaced by a large number of amorphous areas, thereby deteriorating the performance of the composites. The tensile tests showed that the as-rolled composites can reach a tensile strength of 994 MPa while maintaining an acceptable ductility (~10.5%). The findings highlight the importance of interfacial microstructure design, which is helpful for the development of high-performance titanium matrix composites.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Graphene-TiC hybrid reinforced titanium matrix composites with 3D network architecture: fabrication, microstructure and mechanical properties10.1016/j.jallcom.2020.157777 ↗
2. Spark plasma sintering of titanium matrix composite—a review10.1007/s00170-021-07840-7 ↗
3. Titanium metal matrix composites: an overview10.1016/j.compositesa.2019.04.005 ↗
4. Enhanced mechanical properties of few-layer graphene reinforced titanium alloy matrix nanocomposites with a network architecture10.1016/j.matdes.2019.108330 ↗
5. Fabrication and mechanical properties of network structured titanium alloy matrix composites reinforced with Ti2AlC particulates10.1016/j.msea.2020.139065 ↗
6. Uniform dispersion of multi-layer graphene reinforced pure titanium matrix composites via flake powder metallurgy10.1016/j.msea.2018.04.056 ↗
7. Multiscale architecture and superior high-temperature performance of discontinuously reinforced titanium matrix composites
8. Production of titanium matrix composites reinforced with SiC particles10.1016/j.compscitech.2008.03.018 ↗
9. Agglomeration-free nanoscale TiC reinforced titanium matrix composites achieved by in-situ laser additive manufacturing10.1016/j.scriptamat.2020.06.057 ↗
10. Microstructure and tribological properties of titanium matrix composites reinforced with in situ synthesized TiC particles10.1016/j.matchar.2020.110633 ↗
11. Microstructure and mechanical properties of Ti matrix composite reinforced with 5 vol% TiC after various thermo-mechanical treatments10.1016/j.jallcom.2018.05.134 ↗
12. In situ preparation of TiB nanowires for high-performance Ti metal matrix nanocomposites10.1016/j.jallcom.2017.11.238 ↗
13. Spark plasma sintering reaction synthesized TiB reinforced titanium matrix composites10.1016/j.compositesa.2004.09.003 ↗
14. Microstructural characterization of TiB in in situ synthesized titanium matrix composites prepared by common casting technique10.1016/S0925-8388(01)01445-1 ↗
15. Effects of ZrO2 nanoparticle content on microstructure and wear behavior of titanium matrix composite10.1016/j.jmrt.2020.05.021 ↗
16. Mechanical and microstructural properties of titanium matrix composites reinforced by TiN particles10.4028/www.scientific.net/MSF.534-536.825 ↗
17. Effects of degree of deformation on the microstructure, mechanical properties and texture of hybrid-reinforced titanium matrix composites10.1016/j.actamat.2012.01.032 ↗
18. Microstructural and mechanical characteristics of in situ metal matrix composites10.1016/S0927-796X(00)00024-3 ↗
19. Hybrid effect of TiBw and TiCp on tensile properties of in situ titanium matrix composites10.1016/j.jallcom.2007.09.054 ↗
20. Progress on discontinuously reinforced titanium matrix composites10.1016/j.jallcom.2018.07.100 ↗
21. Sintering effect on microstructural evolution and mechanical properties of spark plasma sintered Ti matrix composites reinforced by reduced graphene oxides10.1016/j.ceramint.2018.06.252 ↗
22. Microstructural and mechanical characterization of in-situ TiC/Ti titanium matrix composites fabricated by graphene/Ti sintering reaction10.1016/j.msea.2017.08.079 ↗
23. Tailoring a novel network reinforcement architecture exploiting superior tensile properties of in situ TiBw/Ti composites10.1016/j.msea.2012.03.019 ↗
24. Interface evolution and mechanical properties of nickel coated graphene nanoflakes/pure titanium matrix composites10.1016/j.jallcom.2020.157157 ↗
25. Towards high performance in Ti-based composite through manipulating nickel coatings on graphene reinforcement
26. Fabrication of aluminum matrix composites reinforced with Ni-coated graphene nanosheets10.1016/j.msea.2019.03.068 ↗
27. Mechanical enhancement of copper matrix composites with homogeneously dispersed graphene modified by silver nanoparticles10.1016/j.jallcom.2017.09.102 ↗
28. Preparation of graphene nanoplatelets-copper composites by a modified semi-powder method and their mechanical properties10.1016/j.jallcom.2015.10.252 ↗
29. Preparation of Ag/reduced graphene oxide reinforced copper matrix composites through spark plasma sintering: an investigation of microstructure and mechanical properties10.1016/j.ceramint.2020.02.142 ↗
30. A review of multi-physical fields induced phenomena and effects in spark plasma sintering: fundamentals and applications10.1016/j.matdes.2020.108662 ↗
31. Characteristics, wear and corrosion properties of borided pure titanium by pack boriding near α → β phase transition temperature10.1016/j.ceramint.2020.03.197 ↗
32. Fabrication, characterization and tensile property of a novel Ti2Ni/TiNi micro-laminated composite10.1016/j.matdes.2015.12.014 ↗
33. Uniform dispersion and interface analysis of nickel coated graphene nanoflakes/ pure titanium matrix composites10.1016/j.carbon.2018.05.013 ↗
34. Mechanisms of simultaneously enhanced strength and ductility of titanium matrix composites reinforced with nanosheets of graphene oxides10.1016/j.ceramint.2019.06.189 ↗
35. Graphene nanoplatelets (GNPs)-templated synthesis of oriented TiB and the inspiration for tailoring three-dimensional (3D) interface structure in GNPs/Ti matrix composites10.1016/j.matchar.2021.111447 ↗
36. Good strength-plasticity compatibility in graphene nanoplatelets/Ti composites by strengthening the interface bonding via in-situ formed TiB whisker10.1016/j.ceramint.2020.09.241 ↗
37. Mechanical properties of bulk metallic glasses10.1016/j.pmatsci.2010.04.002 ↗