Hierarchical eutectic structure and superior mechanical property in low cobalt content AlCo0.2CrFeNi2.1 alloy by laser metal deposition
Source abstract
Abstract
The fabrication of AlCo 0.2CrFeNi 2.1 high entropy alloy via laser metal deposition (LMD) was motivated and implemented by the demand for overcoming the strength-ductility trade-off of the as-cast alloys due to the Co concentration. The microstructure features of AlCo 0.2CrFeNi 2.1 alloy were characterized by scanning electron microscopy, X-ray diffraction, transmission electron microscopy, and electron back-scattered diffraction. The mechanical properties were evaluated by a tensile test at room temperature. The synergy of reduced Co content and LMD process led to the formation of hierarchical eutectic microstructures consisting of columnar grains, eutectic colonies, alternately arranged fcc(L1 2)+B2 lamellae, and coherent Cr-rich nanoprecipitates in B2. The growth direction of those eutectic structures was found to be mainly parallel to the building direction (BD). The fcc(L1 2)/B2 eutectics agreed well with the Kurdjumov–Sachs orientation relationship of {110} B2//{111}L1 2, and< 111 > B2//< 110 >L1 2. The LMD fabricated AlCo 0.2CrFeNi 2.1 exhibited anisotropic mechanical properties when stretched in BD and transverse direction (TD). An excellent combination of the ultimate tensile strength (1246 MPa) and ductility (17.1%) was achieved in the BD, better than the as-cast counterpart. The elevated mechanical properties could be attributed to the high cooling rate solidification induced microstructural refinement. The same interlamellar spacing in BD and TD embraced a nearly equal ability to block dislocation movement and gave rise to the similar yield tensile strength. The differences in grain/colony size induced boundary strengthening in BD and TD were evaluated to account for the remarkable changes in ultimate tensile strength as well as ductility.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Microstructure and mechanical properties of BCC-FCC eutectics in ternary, quaternary and quinary alloys from the Al-Co-Cr-Fe-Ni system10.3389/fmats.2020.567793 ↗
2. High entropy alloys-Tunability of deformation mechanisms through integration of compositional and microstructural domains10.1016/j.msea.2021.141085 ↗
3. High entropy alloys: a focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
4. A high-density non-equiatomic WTaMoNbV high-entropy alloy: alloying behavior, microstructure and mechanical properties10.1016/j.jallcom.2021.162505 ↗
5. A novel Co-free Al0.75CrFeNi eutectic high entropy alloy with superior mechanical properties
6. Mechanical properties and corrosion behavior of novel Al-Mg-Zn-Cu-Si lightweight high entropy alloys10.1016/j.jallcom.2021.163508 ↗
7. Ultrahigh hardness in nanostructured dual-phase high-entropy alloy AlCrFeCoNiNb developed by high-pressure torsion10.1016/j.jallcom.2021.161101 ↗
8. Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al0.1CoCrFeNi high-entropy alloys10.1016/j.msea.2021.140752 ↗
9. Novel B2-strengthening Ni–Co–Cr–Al medium-entropy alloys with prominent mechanical performance10.1016/j.msea.2022.142856 ↗
10. Uncovering the eutectics design by machine learning in the Al–Co–Cr–Fe–Ni high entropy system10.1016/j.actamat.2019.10.043 ↗
11. Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy10.1016/j.actamat.2020.116505 ↗
12. Effects of electromagnetic pulse treatment on spinodal decomposed microstructure, mechanical and corrosion properties of AlCoCrFeNi high entropy alloy10.1016/j.jallcom.2021.161676 ↗
13. Effect of crystal structure and grain size on corrosion properties of AlCoCrFeNi high entropy alloy10.1016/j.jallcom.2020.158056 ↗
14. Evolution of phases, hardness and magnetic properties of AlCoCrFeNi high entropy alloy processed by mechanical alloying10.1016/j.jallcom.2020.154826 ↗
15. Irradiation damage in (Zr0.25Ta0.25Nb0.25Ti0.25)C high-entropy carbide ceramics10.1016/j.actamat.2020.06.011 ↗
16. Mechanical, corrosion, and wear properties of biomedical Ti-Zr-Nb-Ta-Mo high entropy alloys10.1016/j.jallcom.2020.157997 ↗
17. Structure and properties of Ti-rich Ti–Zr–Nb–Mo medium-entropy alloys10.1016/j.jallcom.2021.159137 ↗
18. Mechanical properties and corrosion behavior of β-type Ti-Zr-Nb-Mo alloys for biomedical application10.1016/j.jallcom.2020.155693 ↗
19. Elevated-temperature deformation mechanisms in a CrMnFeCoNi high- entropy alloy10.1016/j.actamat.2021.117181 ↗
20. Improved mechanical and corrosion properties of CrMnFeCoNi high entropy alloy with cold rolling and post deformation annealing process10.1016/j.jallcom.2021.161416 ↗
21. Strengthening and deformation mechanism of a Fe20Co20Cr20Mn20Ni20 high entropy alloy with high nitrogen content
22. Grain size dependent deformation behavior of a metastable Fe40Co20Cr20Mn10Ni10 high-entropy alloy10.1016/j.jallcom.2021.160876 ↗
23. Microstructure and mechanical properties of additively manufactured CrMnFeCoNi high-entropy alloys after ultrasonic surface rolling process10.1016/j.jallcom.2021.161393 ↗
24. Comprehensive study of phase transitions in equiatomic AlCoCrFeNi high-entropy alloy10.1016/j.jallcom.2020.158220 ↗
25. Ab initio prediction of vacancy energetics in HCP Al-Hf-Sc-Ti-Zr high entropy alloys and the subsystems10.1016/j.actamat.2022.117677 ↗
26. Chemical evolution-induced strengthening on AlCoCrNi dual-phase high-entropy alloy with high specific strength10.1016/j.jallcom.2018.11.057 ↗
27. The tensile property and notch sensitivity of AlCoCrFeNi2.1 high entropy alloy with a novel “steel-frame” eutectic microstructure10.1016/j.jallcom.2021.158747 ↗
28. Microstructure and mechanical properties of a high entropy alloy with a eutectic composition (AlCoCrFeNi2.1) synthesized by mechanical alloying and spark plasma sintering10.1016/j.jallcom.2020.155424 ↗
29. Microstructures and mechanical properties of CrFeNi2Nbx eutectic multicomponent alloys10.1016/j.jallcom.2020.158502 ↗
30. Influences of laser surface melting on microstructure, mechanical properties and corrosion resistance of dual-phase Cr-Fe-Co-Ni-Al high entropy alloys10.1016/j.jallcom.2020.154100 ↗
31. Effect of sulfuric acid concentration on corrosion behavior of Al0.1CoCrFeNi high-entropy alloy
32. Influence of lanthanum on passivity behavior of CrMnFeNi high entropy alloys10.1016/j.matchemphys.2021.124509 ↗
33. Computational design of thermally stable and precipitation-hardened Al-Co-Cr-Fe-Ni-Ti high entropy alloys10.1016/j.jallcom.2021.161496 ↗
34. Effect of Re and Ru on the phase stability and coarsening kinetics of L12 phase in a Ni29Co27Fe27Cr3Al7Ti7 high entropy alloy10.1016/j.jallcom.2021.158904 ↗
35. Simulations of primary damage in a High Entropy Alloy: probing enhanced radiation resistance10.1016/j.actamat.2021.116951 ↗
36. A promising new class of high-temperature alloys: eutectic high-entropy alloys10.1038/srep06200 ↗
37. Ultrafine-grained AlCoCrFeNi2.1 eutectic high-entropy alloy10.1080/21663831.2016.1160451 ↗
38. Direct solidification of bulk ultrafine-microstructure eutectic high-entropy alloys with outstanding thermal stability10.1016/j.scriptamat.2019.02.035 ↗
39. Promising properties and future trend of eutectic high entropy alloys10.1016/j.scriptamat.2020.06.022 ↗
40. Effect of Ta addition on solidification characteristics of CoCrFeNiTax eutectic high entropy alloys10.1016/j.intermet.2020.106769 ↗
41. Designing novel AlCoCrNi eutectic high entropy alloys10.1016/j.jallcom.2022.163775 ↗
42. A quantitative understanding on the mechanical behavior of AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.jallcom.2020.156610 ↗
43. A review on nano-/ultrafine advanced eutectic alloys10.1016/j.jallcom.2020.154226 ↗
44. Design of a twinning-induced plasticity high entropy alloy10.1016/j.actamat.2015.04.014 ↗
45. Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy10.1016/j.actamat.2013.11.049 ↗
46. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases10.1016/j.actamat.2016.06.063 ↗
47. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range10.1016/j.actamat.2016.11.016 ↗
48. Microstructural origins of high strength and high ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.actamat.2017.07.041 ↗
49. Strengthening mechanisms in high entropy alloys: Fundamental issues10.1016/j.scriptamat.2020.06.019 ↗
50. BCC-FCC interfacial effects on plasticity and strengthening mechanisms in high entropy alloys10.1016/j.actamat.2018.07.031 ↗
51. Promising properties and future trend of eutectic high entropy alloys10.1016/j.scriptamat.2020.06.022 ↗
52. Five decades of research on the development of eutectic as engineering materials
53. Remelting induced fully-equiaxed microstructures with anomalous eutectics in the additive manufactured Ni32Co30Cr10Fe10Al18 eutectic high-entropy alloy10.1016/j.scriptamat.2021.113952 ↗
54. Annealing-induced microstructure and properties evolution of refractory MoFeCrTiWAlNb3 eutectic high-entropy alloy coating by laser cladding10.1016/j.intermet.2020.107039 ↗
55. Selective laser melting of dense and crack-free AlCoCrFeNi2.1 eutectic high entropy alloy: synergizing strength and ductility10.1016/j.jmst.2021.11.049 ↗
56. Ultra strong and ductile eutectic high entropy alloy fabricated by selective laser melting10.1016/j.jmst.2021.08.015 ↗
57. A novel Fe20Co20Ni41Al19 eutectic high entropy alloy with excellent tensile properties10.1016/j.matlet.2018.01.017 ↗
58. Enhanced strength and ductility of Al0.9CoCrNi2.1 eutectic high entropy alloy by thermomechanical processing
59. Microstructure and mechanical properties of AlCoxCrFeNi3-x eutectic high-entropy-alloy system10.1016/j.jallcom.2020.153886 ↗
60. A casting eutectic high entropy alloy with superior strength-ductility combination10.1016/j.matlet.2019.06.067 ↗
61. Enhancing the mechanical properties of casting eutectic high entropy alloys with Mo addition10.1007/s00339-019-2506-z ↗
62. On the development of pseudo-eutectic AlCoCrFeNi2.1 high entropy alloy using Powder-bed Arc Additive Manufacturing (PAAM) process10.1016/j.msea.2020.140639 ↗
63. Enabling stronger eutectic high-entropy alloys with larger ductility by 3D printed directional lamellae
64. Simultaneously enhanced strength-ductility of AlCoCrFeNi2.1 eutectic high-entropy alloy via additive manufacturing10.1016/j.msea.2021.142327 ↗
65. Unique strength-ductility balance of AlCoCrFeNi2.1 eutectic high entropy alloy with ultra-fine duplex microstructure prepared by selective laser melting10.1016/j.jmst.2021.10.013 ↗
66. Microstructure, crystallographic orientation and mechanical property in AlCoCrFeNi2.1 eutectic high-entropy alloy under magnetic field-assisted directional solidification10.1007/s11661-020-05771-8 ↗
67. Microstructures and room temperature tensile properties of as-cast and directionally solidified AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.intermet.2019.106681 ↗
68. Microstructure evolution and mechanical properties of atmosphere plasma sprayed AlCoCrFeNi high-entropy alloy coatings under post-annealing10.1016/j.jallcom.2021.159607 ↗
69. Multiscale mechanical performance and corrosion behaviour of plasma sprayed AlCoCrFeNi high-entropy alloy coatings10.1016/j.jallcom.2020.157140 ↗
70. Tribological and mechanical properties of surface nanocomposite AlCoCrFeNi2.1 high-entropy alloy produced by FSP10.1016/j.jallcom.2021.163052 ↗
71. Fatigue behavior of additive manufactured CrFeCoNi medium-entropy alloy10.1016/j.jallcom.2021.158609 ↗
72. Micro/nano-mechanical behaviors of individual FCC, BCC and FCC/BCC interphase in a high-entropy alloy10.1016/j.jmst.2021.11.017 ↗
73. Yield strength-ductility trade-off breakthrough in Co-free Fe40Mn10Cr25Ni25 high-entropy alloys with partial recrystallization
74. A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature10.1016/j.jallcom.2020.153981 ↗
75. Dynamic tensile mechanisms and constitutive relationship in CrFeNi medium entropy alloys at room and cryogenic temperatures
76. A multi-component AlCrFe2Ni2 alloy with excellent mechanical properties10.1016/j.matlet.2016.01.096 ↗
77. Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing10.1016/j.msea.2021.142190 ↗
78. Refined microstructure and enhanced mechanical properties of AlCrFe2Ni2 medium entropy alloy produced via laser remelting10.1016/j.jmst.2021.05.033 ↗
79. Microstructural design by severe warm-rolling for tuning mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy10.1016/j.intermet.2019.106601 ↗
80. Insights into micro-mechanical response and texture of the additively manufactured eutectic high entropy alloy AlCoCrFeNi2.110.1016/j.jallcom.2020.154034 ↗
81. One-step additive manufacturing and microstructure evolution of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics by laser directed energy deposition10.1016/j.jeurceramsoc.2021.01.047 ↗
82. Regular eutectic and anomalous eutectic growth behavior in laser remelting of Ni-30wt%Sn alloys10.1016/j.actamat.2016.12.061 ↗
83. Columnar to equiaxed transition during direct metal laser sintering of AlSi10Mg alloy: effect of building direction
84. Eutectic colony formation: a phase-field study10.1103/PhysRevE.66.061608 ↗
85. Faceted Kurdjumov-Sachs interface-induced slip continuity in the eutectic high-entropy alloy AlCoCrFeNi2.110.1016/j.jmst.2020.04.073 ↗
86. Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys10.1126/science.abf6986 ↗
87. High hardness dual-phase high entropy alloy thin films produced by interface alloying10.1016/j.scriptamat.2018.11.004 ↗
88. Effect of ceramic rolling and annealing on mechanical properties of AlCoCrFeNi2.1 eutectic high-entropy alloys10.1007/s11665-018-3430-7 ↗
89. Laser beam welding of AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.matlet.2021.131137 ↗
90. TEM and high resolution TEM investigation of phase formation in high entropy alloy AlCrFe2Ni210.3389/fmats.2020.00284 ↗
91. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
92. Substitutional solution hardening10.1016/0001-6160(63)90213-X ↗
93. Brandes · 1992
94. Frost · 1982
95. Hydrogen embrittlement of additively manufactured AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.corsci.2021.110007 ↗
96. Towards the large-scale production and strength prediction of near-eutectic AlxCoCrFeNi2.1 alloys by additive manufacturing10.1016/j.mfglet.2020.06.002 ↗
97. Surface modification for AlCoCrFeNi2.1 eutectic high-entropy alloy via laser remelting technology and subsequent aging heat treatment10.1016/j.jallcom.2021.162380 ↗
98. Phase selection and mechanical properties of directionally solidified AlCoCrFeNi2.1 eutectic high-entropy alloy10.1016/j.jallcom.2021.162907 ↗
99. Dynamic mechanical properties and microstructure evolution of AlCoCrFeNi2.1 eutectic high-entropy alloy at different temperatures10.1016/j.jallcom.2021.162097 ↗
100. Simultaneous enhancement of strength and ductility in an AlCoCrFeNi2.1 eutectic high-entropy alloy via friction stir processing10.1016/j.jallcom.2018.06.337 ↗