Novel Al-Co-Ni-Cu as-cast alloy with high damping and good corrosion resistance
Source abstract
Abstract
A new multi-principal Al-Co-Ni-Cu alloy with high damping and good corrosion resistance was prepared. The effects of the Al content on the microstructure, damping properties, corrosion behavior, and mechanical properties of Al xCoNi 2Cu (x = 0, 0.1, 0.3, and 0.5) alloys were studied. Al xCoNi 2Cu (x = 0–0.5) alloys exhibited face-centered cubic (FCC) crystal structures. The Al 0.5CoNi 2 Cu alloy displayed a significant increase in the internal friction (IF) value (Q −1) compared to other Al xCoNi 2Cu alloys (x = 0–0.3). The maximum Q −1 of the Al 0.5CoNi 2Cu alloy was 0.032, which was twice that of Al xCoNi 2Cu (x = 0–0.3) alloys and almost equal to that of the traditional Mn-Cu damping alloy. The mechanism for the sudden increase in the damping property of the alloys was explained by the interaction between the precipitated Ni 3Al phase and the dislocations generated during the nucleation process. Moreover, the Al 0.5CoNi 2Cu alloy exhibited a lower corrosion current and rate in electrochemical and immersion tests in a 3.5 wt% NaCl solution compared to Al xCoNi 2Cu (x = 0–0.3) alloys. Supersaturated Al solubilized in the matrix, resulting in the formation of Al 2O 3 protective films which effectively delayed the corrosion process. In addition, the Al 0.5CoNi 2 Cu alloy exhibited good corrosion resistance, comparable to that of ferritic stainless steel, making it a promising candidate for marine applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · High Entropy Alloys Studies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. A novel high-entropy alloy with excellent damping property toward a large strain amplitude environment10.1016/j.jallcom.2019.06.247 ↗
2. The effect of the annealing temperature on the damping capacity under constant prestress, mechanical properties and microstructure of an Fe–11Cr-2.5Mo-0.1Zr-1.0Ni forged damping alloy10.1016/j.jallcom.2019.152429 ↗
3. Mn segregation dependence of damping capacity of as-cast M2052 alloy10.1016/j.msea.2016.02.084 ↗
4. Effect of pre-deformation and subsequent aging on the damping capacity of Mn-20 at%Cu-5 at%Ni-2 at%Fe alloy10.1002/adem.201400507 ↗
5. Strain glass transition in high damping Mn-22Cu-5Ni-2Fe alloy10.1016/j.pnsc.2018.07.004 ↗
6. Damping properties of a sintered Mg–Cu–Mn alloy10.1016/S0925-8388(03)00256-1 ↗
7. Microstructure evolution, damping capacities and mechanical properties of novel Mg-xAl-0.5Ce (wt%) damping alloys10.1016/j.jallcom.2017.09.193 ↗
8. Effect of Zn content on the microstructures, mechanical properties, and damping capacities of Mg–7Gd–3Y–1Nd–0.5Zr based alloys10.1016/j.jallcom.2018.09.303 ↗
9. Temperature dependence of the damping capacity in Fe–19.35Mn alloy10.1016/j.jallcom.2007.01.147 ↗
10. Effects of ε martensite and nitrogen on the damping property of high strength Fe–Cr–Mn alloys10.1016/S0925-8388(03)00251-2 ↗
11. Effects of Cr addition and cold pre-deformation on the mechanical properties, damping capacity, and corrosion behavior of Fe–17%Mn alloys10.1016/j.jallcom.2019.06.178 ↗
12. Fabrication of Al–35Zn alloys with excellent damping capacity and mechanical properties10.1016/j.jallcom.2017.06.091 ↗
13. Energy-dissipation characteristics of Fe–13Cr–2.5Mo damping alloy10.1016/j.jallcom.2012.05.122 ↗
14. Investigation of the effect of alloying elements on damping capacity and magnetic domain structure of Fe-Cr-Al based vibration damping alloys10.1016/j.jallcom.2016.10.297 ↗
15. Aging characteristics and properties of Fe-16Cr-2.5Mo-1.0Cu damping alloy10.1016/j.msea.2018.07.081 ↗
16. High-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy achieved via precipitation strengthening in a heterogeneous structure10.1016/j.scriptamat.2020.04.035 ↗
17. A promising new class of high-temperature alloys: eutectic high-entropy alloys10.1038/srep06200 ↗
18. Ultrastrong and ductile BCC high-entropy alloys with low-density via dislocation regulation and nanoprecipitates10.1016/j.jmst.2021.08.034 ↗
19. Corrosion of high entropy alloys10.1038/s41529-017-0009-y ↗
20. Understanding effect of 3.5 wt% NaCl on the corrosion of Al0.1CoCrFeNi high-entropy alloy10.1016/j.jnucmat.2017.08.015 ↗
21. Corrosion-resistant high entropy alloy with high strength and ductility10.1016/j.scriptamat.2019.03.028 ↗
22. Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy10.1016/j.actamat.2010.09.023 ↗
23. Deformation twinning behaviors of the low stacking fault energy high-entropy alloy: an in-situ TEM study10.1016/j.scriptamat.2017.05.001 ↗
24. Effects of AL addition on microstructure and mechanical properties of Al CoCrFeNi high-entropy alloy10.1016/j.msea.2015.09.034 ↗
25. Structure-property relationships in hot forged AlxCoCrFeNi high entropy alloys10.1016/j.msea.2020.139877 ↗
26. Cor · Stand. Pract. Lab. Immers. Corros. Test. Met. · 2004 · 1
27. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
28. Effect of boron on grain-boundaries in Ni3Al†10.1016/0001-6160(85)90139-7 ↗
29. Precipitation of Cr-rich phases in rapidly solidified Ni–20Al–8Cr (at%) powders10.1016/j.intermet.2007.01.002 ↗
30. Microstructure and damping properties of MnCuNiFeCe alloy10.1007/s12598-016-0702-y ↗
31. Damping behavior of AlxCoCrFeNi high-entropy alloys by a dynamic mechanical analyzer10.1016/j.jallcom.2014.03.050 ↗
32. Effect of Si and Cr on stacking fault probability and damping capacity of Fe–Mn alloy10.1016/j.msea.2007.06.063 ↗
33. Theory of mechanical damping due to dislocations10.1063/1.1722436 ↗
34. Effect of yttrium addition on microstructures, damping properties and mechanical properties of as-cast Mg−based ternary alloys10.1016/j.jallcom.2019.01.287 ↗
35. Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution10.1016/j.matchemphys.2005.01.001 ↗
36. Evolution of microstructure, hardness, and corrosion properties of high-entropy Al0.5CoCrFeNi alloy10.1016/j.intermet.2010.10.008 ↗
37. Influence of remelting and annealing treatment on corrosion resistance of AlFeNiCoCuCr high entropy alloy in 3.5% NaCl solution10.1016/j.jallcom.2018.10.081 ↗
38. Electrochemical passive properties of AlxCoCrFeNi (x=0, 0.25, 0.50, 1.00) alloys in sulfuric acids10.1016/j.corsci.2009.11.028 ↗
39. Al0.3CrxFeCoNi high-entropy alloys with high corrosion resistance and good mechanical properties10.1016/j.jallcom.2020.158436 ↗
40. Electrochemical behavior of mechanically alloyed hard Cu-Al alloys in marine environment10.1016/j.corsci.2019.03.043 ↗
41. Anodic polarization and surface composition of Fe-16Al-0.14C Alloy in 0.25 M Sulfuric Acid10.5006/1.3277588 ↗
42. Oxidation of polycrystalline copper thin films at ambient conditions10.1021/jp076981k ↗