Effect of erbium on microstructure and properties of AA6061 twin-roll casting sheet
Source abstract
Abstract
In this study, the effect of adding trace Er element on the microstructure and mechanical properties of AA6061 twin-roll casting sheet was evaluated. An NF6–300 vertical twin-roll cast-rolling mill was used to prepare AA6061 twin-roll casting sheet with different Er contents, and the main phase morphology and formation mechanism of Er in the alloy were analyzed using microstructure observation, scanning electron microscopy, transmission electron microscopy, and other microstructure analysis techniques. The results show that the addition of a small amount of Er can form the primary Al 3 Er phase in the alloy. This phase structure becomes an excellent heterogeneous nucleation core of α-Al. This significantly affects the grain size of AA6061 TRC sheets. In addition, Er interacts with the Fe in the TRC sheet. Therefore, the iron-rich phase in the structure changes from coarse needle-like and skeletal shapes to smaller short rods and blocks, and micron-sized spheroids or lumps appear in the structure. Spheroid-like iron-rich phase contains Er. When the amount of Er addition exceeds 0.4 wt%, the number of rare-earth compounds and impurity phases in the structure increases significantly, and they mainly precipitate along the grain boundaries. This increases the strengthening effect of second phase and greatly reduces the plasticity of the material. When the amount of Er addition reaches 0.4 wt%, the comprehensive mechanical properties of TRC sheet are the best. At this time, the tensile strength, yield strength, and elongation are 160.14 MPa, 124.77 MPa, and 10.68%, respectively.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. The crystal structure of the β' phase in Al-Mg-Si alloys10.1016/j.actamat.2007.02.032 ↗
2. Progress of strip casting technology for steel; historical developments10.2355/isijinternational.52.2109 ↗
3. Effects of casting speed on thin gauge foil surface quality of 8079 aluminum alloy produced by twin roll casting method
4. Segregation in twin-roll cast Mg alloy and its suppression through alloy design10.1016/j.matlet.2014.06.113 ↗
5. Effects of electromagnetic vibrations on the microstructure of continuously cast aluminum alloys10.1016/0921-5093(93)90209-W ↗
6. Potency of high-intensity ultrasonic treatment for grain refinement of magnesium alloys10.1016/j.scriptamat.2008.02.017 ↗
7. Effects of different external fields on the microstructure and mechanical properties of novel Al-Cu-Li alloy during twin-roll casting10.1016/j.msea.2019.04.079 ↗
8. Strip casting of A5182 alloy using a melt drag twin-roll caster10.1016/S0924-0136(02)00251-0 ↗
9. The microstructure and formation mechanism of core- shell- like TiAl3/Ti2Al20Ce in melt- spun Al-Ti-B-Re grain refiner10.1016/j.matlet.2012.06.072 ↗
10. Microstructure of Al-5Ti-1B–1RE nanoribbon and its refining efficiency on as- cast A356 alloys10.1016/S1002-0721(12)60278-6 ↗
11. Microstructures and mechanical properties of Er modified AA7075 alloy
12. New progress on Er-containing micro-alloying aluminum alloys10.4028/www.scientific.net/MSF.877.211 ↗
13. Study on the erbium strengthened aluminum alloy10.4028/www.scientific.net/MSF.546-549.623 ↗
14. Influence of Er content on microstructure of as-cast Al-Mg-Si alloys
15. Effect of erbium content on microstructure of solution state Al-Mg-Si-Mn alloys
16. Microstructures and mechanical properties of gas tungsten arc welded joints of new Al-Mg-Sc and Al-Mg-Er alloys plates10.1016/j.msea.2014.10.014 ↗
17. F.B. Zhang. A study on regulation and its mechanism of plastic deformation and heat treatment on microstructure and properties of 6013 type aluminum alloy, Jiangsu University, Zhenjiang, 2017. http://cdmd.cnki.com.cn/Article/CDMD-10299–1018845057.htm.
18. Influence of Erbium on the microstructure and properties of industrial purity aluminum
19. Y. Lei, Effect of microalloying of Zr and Er on microstructure and properties of 6061 aluminum alloy, Hefei University of Technology, Hefei, 2018.
20. Effect of trace yttrium addition on the microstructure and tensile properties of recycled Al-7Si-0.3Mg-1.0Fe casting alloys10.1016/j.msea.2016.04.036 ↗
21. Modification behavior of trace rare earth on impurity phases in commercial purity aluminum
22. Form and thermodynamic analysis of element Er in Al-Mg-Si alloy
23. Effect of rare earth on modification behavior of impurity phases in Al-1Mn-1Mg alloy
24. The kinetics of precipitation from supersaturated solid solution
25. Transient Ostwld ripening and the disagreement between steady state coarsening theory and experiment10.1016/S1359-6454(00)00342-6 ↗
26. Microstructures and properties of 6063 aluminium alloy as-cast modified by rare earth element Er