Effect of strain rate on fracture reliability of Cu45Zr45Co10 amorphous alloy microwires by statistical analyses
Source abstract
Abstract
Abstract The understanding of the fracture mechanism of amorphous alloys (AAs) is of importance for their engineering applications as advanced structural materials. In this study, a series of micro-tensions of Cu45Zr45Co10 AA microwires were conducted under different strain rates ranging from 5 × 10−5 s−1 to 1 × 10−2 s−1. It is found that all microwires fracture by shear cracking, but the shear fracture strengths exhibit pronounced rate-dependent uncertainties. Based on both lognormal and Weibull statistical analyses, the studied AA microwires reveal a positive rate-sensitivity of fracture strengths. However, increasing strain rates incurs the decrease in the fracture reliability. We demonstrate that the fracture reliability of AA microwires is dominated by a square root singularity of the characteristic lengths of shear offset on fracture surfaces, which satisfies linear elastic fracture mechanics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Ductile bulk metallic glass10.1103/PhysRevLett.93.255506 ↗
2. Nanometre-scale defects in shear bands in a metallic glass10.1080/01418610208240056 ↗
3. Origin of structural heterogeneity in Zr-Co-Al metallic glasses from the point of view of liquid structures10.1016/j.jnoncrysol.2020.120501 ↗
4. Atomic-scale origin of shear band multiplication in heterogeneous metallic glasses10.1016/j.scriptamat.2019.11.006 ↗
5. Designing metallic glasses with optimal combinations of glass-forming ability and mechanical properties10.1016/j.jmst.2020.08.028 ↗
6. New DyHoCo medium entropy amorphous microwires of large magnetic entropy change10.1016/j.jallcom.2020.155431 ↗
7. Optimizing magnetoimpedance of amorphous microwires by nanocarbon-induced magnetic anisotropy10.1016/j.jmmm.2020.166527 ↗
8. Evolution of the magnetic anisotropy and magnetostriction in Co-based amorphous alloys microwires due to current annealing and stress-sensory applications10.1016/j.jallcom.2020.155584 ↗
9. The influence of annealing on domain wall propagation in bistable amorphous microwire with unidirectional effect10.1016/j.physb.2018.04.011 ↗
10. Tunable domain wall dynamics in amorphous ferromagnetic microwires10.1016/j.jallcom.2020.154843 ↗
11. Ultrahigh-strength submicron-sized metallic glass wires10.1016/j.scriptamat.2014.04.005 ↗
12. Atomic structure evolution of high entropy metallic glass microwires at cryogenic temperature10.1016/j.scriptamat.2018.12.031 ↗
13. Radial dependence of circular magnetic permeability of amorphous magnetic microwires10.1016/j.jmmm.2021.168155 ↗
14. Cryogenic-temperature-induced structural transformation of a metallic glass10.1080/21663831.2016.1263687 ↗
15. Rejuvenation in hot-drawn micrometer metallic glassy wires10.1088/0256-307X/37/1/017103 ↗
16. The combined effects of grain and sample sizes on the mechanical properties and fracture modes of gold microwires10.1016/j.jmst.2018.09.012 ↗
17. Tensile properties of glassy MgZnCa wires and reliability analysis using Weibull statistics10.1016/j.actamat.2009.03.028 ↗
18. Flexural strength and weibull analysis of bulk metallic glasses10.1016/j.jmst.2015.12.016 ↗
19. Mechanical and magnetocaloric properties of Gd-based amorphous microwires fabricated by melt-extraction10.1016/j.actamat.2012.11.006 ↗
20. Influence of strain rate on compressive deformation behavior of a Zr-Cu-Ni-Al bulk metallic glass at room temperature10.1007/s11661-011-0632-0 ↗
21. Effect of strain rate on compressive behavior of Ti-based bulk metallic glass at room temperature10.1016/j.jallcom.2008.04.043 ↗
22. Effect of strain rate on compressive behavior of Ti45Zr16Ni9Cu10Be20 bulk metallic glass10.1016/j.msea.2006.02.405 ↗
23. Influence of the loading rate on the indentation response of Ti-based metallic glass10.1557/jmr.2009.0117 ↗
24. Nanoindentation study of size effect on shear transformation zone size in a Ni–Nb metallic glass10.1016/j.msea.2015.01.001 ↗
25. Effect of loading rate on the serrated flow of a bulk metallic glass during nanoindentation10.1016/j.actamat.2008.05.039 ↗
26. Opposite grain size dependence of strain rate sensitivity of copper at low vs high strain rates10.1016/j.msea.2018.09.018 ↗
27. Effects of drawing on the tensile fracture strength and its reliability of small-sized metallic glasses10.1016/j.actamat.2009.12.043 ↗
28. Reliability of tensile fracture strength of Co-based metallic glass microwires by Weibull statistics10.1088/2053-1591/ab3931 ↗
29. Revealing the structural heterogeneity of metallic glass: Mechanical spectroscopy and nanoindentation experiments10.1016/j.ijmecsci.2021.106469 ↗
30. Controlling the distribution of structural heterogeneities in severely deformed metallic glass10.1016/j.msea.2019.02.092 ↗
31. Room-temperature superplasticity in Au nanowires and their atomistic mechanisms10.1039/C9NR02053E ↗
32. Comparative study of tensile properties and magnetic properties for Nb-doped Fe-based wires10.1016/j.jmrt.2020.09.004 ↗
33. Mechanical behaviors of nanowires10.1063/1.4989649 ↗
34. Correlations between elastic moduli and properties in bulk metallic glasses10.1063/1.2193060 ↗
35. Melt-extracted Gd73. 5Si13B13. 5/GdB6 ferromagnetic/antiferromagnetic microwires with excellent magnetocaloric properties10.1016/j.jallcom.2019.153333 ↗
36. Strain measurements of silicon dioxide microspecimens by digital imaging processing10.1007/s11340-006-9010-z ↗
37. A three-parameter Weibull statistical analysis of the strength variation of bulk metallic glasses10.1016/j.scriptamat.2009.07.038 ↗
38. Experimental probability estimators for Weibull plots10.1007/BF01729379 ↗
39. Plastic deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗
40. Atomistic basis for the plastic yield criterion of metallic glass10.1038/nmat918 ↗
41. Pressure effects on metallic glasses10.1016/j.actamat.2009.10.018 ↗
42. Relating residual stress and microstructure to mechanical and giant magneto-impedance properties in cold-drawn Co-based amorphous microwires10.1016/j.actamat.2012.06.047 ↗
43. The penetration of a fluid into a porous medium or Hele-Shaw cell containing a more viscous liquid
44. Local heating associated with crack tip plasticity in Zr–Ti–Ni–Cu–Be bulk amorphous metals10.1557/JMR.1999.0642 ↗
45. Difference in compressive and tensile fracture mechanisms of Zr59Cu20Al10Ni8Ti3 bulk metallic glass10.1016/S1359-6454(02)00521-9 ↗
46. Tensile fracture morphologies of bulk metallic glass10.1063/1.3487968 ↗
47. Structural amorphous steels10.1103/PhysRevLett.92.245503 ↗
48. 1981
49. Cryogenic-temperature-induced transition from shear to dilatational failure in metallic glasses10.1016/j.actamat.2014.05.052 ↗