Processing of intermetallic laminates by Self-Propagating High–Temperature Synthesis initiated with concentrated solar energy
Source abstract
Abstract
The intermetallic compounds are very interesting in a multitude of structural and functional applications, such as in turbomachines or engine parts, due to their good behaviour at high temperatures, as well as their high resistance to corrosion and oxidation. In the present work, the study of processing of the Ni-Al system intermetallics has been carried out by means of Self-Propagating High–Temperature Synthesis initiated by concentrated solar energy (SHS–CSE). Synthesis by this high-energy exothermic reaction often causes the appearance of porosity, lack of interlayer adhesion, volumetric expansion, and even the total loss of sample shape. To obtain high-quality systems, a study has been carried out on one-layer and multi-layer configurations from powder materials, considering the influence of the heating rate and time. The use of concentrated solar energy has allowed to obtain fully densified nickel parts at 1000 °C in just 15 min, compared to the 1325 °C and more than 12 h required by conventional techniques to obtain lower relative densities (~97%). The best results in multilayer configurations have been achieved in Ni-Ni/Al-Ni system with the synthesis of intermetallic compounds type Ni2Al3, NiAl and Ni3Al. The control of volumetric expansion and porosity, full densified nickel layers perfectly adhered to the interlayer and hardness values up to 900 HV have been obtained in just 2 min. This work highlights the wide possibilities of the use of CSE in metal treatment, which allows efficient and sustainable synthesis of new systems and the improvement of the final properties of the parts.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Wear and enhancement of wear resistance – a review10.1016/j.matpr.2020.02.616 ↗
2. An overview of intermetallics research and application: status of thermal spray coatings10.1016/j.jmrt.2013.03.013 ↗
3. Nickel and iron aluminides: an overview on properties, processing, and applications10.1016/0966-9795(95)00056-9 ↗
4. Critical evaluation of the Fe–Ni, Fe–Ti and Fe–Ni–Ti alloy systems10.1016/j.intermet.2005.11.028 ↗
5. R. Mitra, R.J.H. Wanhill, Indian Institute of Metals Series, Aerospace materials and material technologies, structural intermetallics, in: Aerospace Materials and Material Technologies, 2017, pp. 229–245. https://doi:10.1007/978–981-10–2134-3_10.10.1007/978-981-10-2134-3_10 ↗
6. Reaction mechanism of combustion synthesis of NiAl10.1016/S0921-5093(01)01549-0 ↗
7. The use of combustion reactions for processing mineral raw materials: metallothermy and self-propagating high-temperature synthesis10.1007/s11663-015-0455-2 ↗
8. Load-assisted SHS joining of NiAl to Ni10.3103/S1061386213010111 ↗
9. Joining of nickel monoaluminide to a superalloy substrate by high pressure self-propagating high-temperature synthesis10.1016/S0925-8388(01)01924-7 ↗
10. In situ joining of nickel monoaluminide to iron by reactive sintering10.2355/isijinternational.38.310 ↗
11. SHS joining of intermetallics with metallic substrates10.3103/S1061386211030149 ↗
12. Simultaneous synthesis joining of a nicral layer to a superalloy substrate by self-propagating high-temperature synthesis10.1023/A:1016364825219 ↗
13. Combustion joining of refractory materials10.3103/S1061386207030089 ↗
14. Phenomenology, mechanism and kinetics of the combustion reactions in mechanochemical reactors for the example of Zn–S–Sn system processing in a ball mill (overview)
15. Ultrafast mechanochemical synthesis of copper sulfides10.1039/C6RA20588G ↗
16. Nickel nanoparticles by mechanical synthesis in the NiO–Mg system10.3103/S1061386220020065 ↗
17. Preparation of B4C–SiC–HfB2 nanocomposite by mechanically activated combustion synthesis10.1016/j.ceramint.2020.01.279 ↗
18. Simulation of the mechanically induced self-propagating reactions: theoretical estimation for MSRs ignition time in Zn–S–Sn system10.1080/00102202.2013.846329 ↗
19. Laser initiated Ti3SiC2 powder and coating synthesis10.1016/j.ceramint.2018.03.143 ↗
20. Addition of a nickel aluminide coating to Inconel 600 using a solar furnace10.1007/BF00704516 ↗
21. Coating processing by self-propagating high-temperature synthesis (SHS) using a Fresnel lens
22. NiAl coatings on carbon steel by self-propagating high-temperature synthesis assisted with concentrated solar energy: mass influence on adherence and porosity10.1016/j.solmat.2004.06.003 ↗
23. NiAl coating on carbon steel with an intermediate Ni gradient layer10.1016/j.surfcoat.2005.02.176 ↗
24. NiAl intermetallic coatings elaborated by a solar assisted SHS process10.1016/j.intermet.2005.11.022 ↗
25. Concentrated solar energy applications in materials science and metallurgy10.1016/j.solener.2018.05.065 ↗
26. Solar gas nitriding of Ti6Al4V alloy10.1016/j.apsusc.2013.06.128 ↗
27. High melting point metals welding by concentrated solar energy10.1016/j.solener.2013.05.019 ↗
28. Ti6Al4V titanium alloy welded using concentrated solar energy10.1016/j.jmatprotec.2015.04.015 ↗
29. Development of high speed steel sintered using concentrated solar energy10.1016/j.jmatprotec.2013.06.002 ↗
30. Processing of AISI M2 high speed steel reinforced with VC by solar sintering10.1016/j.matdes.2013.09.027 ↗
31. Sinter-hardening of chromium PM steels with concentrated solar energy10.1016/j.jmatprotec.2020.116616 ↗
32. Weibull statistical analysis of flexure breaking performance for alumina ceramic disks sintered by solar radiation heating10.1016/S0272-8842(99)00041-3 ↗
33. Fracture toughness of solar-sintered WC with Co additive10.1016/S0272-8842(01)00099-2 ↗
34. Flux distribution delivered by a Fresnel lens used for concentrating solar energy10.1115/1.1638783 ↗
35. ISO 2738:1999, Sintered metal materials, excluding hardmetals, Permeable sintered metal materials. Determination of density, oil content and open porosity, ISO/TC 119, 1999.
36. ISO 4498:2010, Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness, ISO/TC 119, 2010.
37. Study of magnetoelastic properties of pure nickel parts produced by metal injection moulding10.1016/j.matdes.2015.08.137 ↗
38. Enhancing properties of soft magnetic materials: a study into hot isostatic pressing and sintering atmosphere influences10.3390/met11040643 ↗
39. B. Julien, M. Després, Metal injection moulding: a near net shape fabrication method for the manufacture of turbine engine component, Maetta Sciences Boucherville Quebec (Canada), 2006.
40. Microstructure and magnetic properties of Fe–79%Ni–4%Mo alloy fabricated by metal injection moulding10.1016/j.powtec.2013.11.011 ↗
41. Injection molding of nickel based 625 superalloy: sintering, heat treatment, microstructure and mechanical properties10.1016/j.jallcom.2012.08.069 ↗
42. Spark plasma sintering and hot isostatic pressing of nickel nanopowders elaborated by a modified polyol process and their microstructure, magnetic and mechanical characterization10.1016/j.jallcom.2010.02.142 ↗
43. Achieving good tensile properties in ultrafine grained nickel by spark plasma sintering10.1016/j.msea.2019.138770 ↗
44. Dissolution-precipitation mechanism of self-propagating high-temperature synthesis of mononickel aluminide10.1016/S0966-9795(01)00046-2 ↗
45. Comparison between the microstructural evolutions of two modes of SHS of NiAl: key to a common reaction mechanism10.1016/j.actamat.2003.08.018 ↗
46. Reaction synthesis and microstructures of NiAl/Ni micro-laminated composites10.1016/j.msea.2005.01.044 ↗
47. A study of self-propagating high-temperature synthesis of NiAl in thermal explosion mode10.1016/S1359-6454(01)00387-1 ↗
48. Formation of porous Ni-Al intermetallics through pressureless reaction synthesis10.1016/j.jallcom.2009.05.079 ↗
49. Growth kinetics of intermetallic phases in transient liquid phase bonding process (TLPB) in Al/Ni system10.4028/www.scientific.net/DDF.323-325.465 ↗
50. Enhanced densification of combustion synthesized Ni-Al intermetallic compound by Si addition10.1016/S0966-9795(03)00120-1 ↗
51. Dissimilar joining of nickel aluminide with spheroidal graphite cast iron and Cu alloy by hot pressing10.1016/j.stam.2003.10.010 ↗
52. Mechanical properties of hypoeutectic Al-Ni alloys with Al3Ni intermetallics10.3139/120.110825 ↗