Effects of hot pressing temperature and annealing temperature on microstructure and compressive properties of a bulk nanocrystalline AZ61 magnesium alloy contain Ti
Source abstract
Abstract
Abstract Involving rare-earth-free Mg alloys, developing microstructure of nanocrystalline matrix and dispersing stable nano-scale precipitates, being a great challenge, is the key to achieve ultra-high strength. In this work, bulk nanocrystalline magnesium alloy was prepared by mechanical milling and subsequent vacuum hot pressing. The effect of hot pressing temperature on microstructure, densification and mechanical properties was analyzed. After hot pressing at 723 K for 60 min, the powders got densified and the average grain size of magnesium matrix was ~76 nm. Nano-scale Ti3Al precipitates with a particle size of ~10 nm were detected by X-ray diffractometer and high-resolution electron microscope. After that, annealing treatment was carried out at 573 K for various times. Both strength and ductility got improved evidently. After annealing at 573 K for 80 h, the yield strength, compressive strength, fracture strain and hardness were 498 MPa, 553 MPa, 4.9% and 1.44 GPa, respectively. Based on analysis on strengthening mechanisms, the contribution rates owing to grain boundary strengthening effect, Orowan effect and load transfer effect were calculated to be 64%, 33% and 3%. It was certified that nanocrystalline magnesium phase together with nano-scale Ti3Al precipitates play a crucial role in realizing ultra-high strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Development of low-alloyed and rare-earth-free magnesium alloys having ultra-high strength10.1016/j.actamat.2018.03.002 ↗
2. Magnesium properties-applications-potential10.1016/S0921-5093(00)01351-4 ↗
3. Weight loss with magnesium alloys10.1126/science.1182848 ↗
4. Diffusion growth of ϕ ternary intermetallic compound in the Mg-Al-Zn alloy system: in-situ observation and modeling10.1016/j.jmst.2020.05.026 ↗
5. Novel low-cost magnesium alloys with high yield strength and plasticity10.1016/j.msea.2019.138332 ↗
6. Dual-phase nanostructuring as a route to high-strength magnesium alloys10.1038/nature21691 ↗
7. A high-strength low-rare-earth-alloyed magnesium alloy via traditional hot-extrusion10.1016/j.jallcom.2019.151967 ↗
8. Novel hexagonal structure and ultrahigh strength of magnesium solid solution in the Mg–Zn–Y system10.1557/JMR.2001.0260 ↗
9. Designing a magnesium alloy with high strength and high formability10.1038/s41467-018-04981-4 ↗
10. Achieving high strength and high ductility in magnesium alloy using hard-plate rolling (HPR) process
11. Development of high-strength magnesium alloys via combined processes of extrusion, rolling and ageing10.1016/j.scriptamat.2011.01.042 ↗
12. Achieving high strength and high ductility in magnesium alloys using severe plastic deformation combined with low-temperature aging10.1016/j.scriptamat.2009.08.020 ↗
13. Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging10.1016/j.actamat.2020.09.024 ↗
14. Fabrication of ultra-high strength magnesium alloys over 540 MPa with low alloying concentration by double continuously extrusion10.1016/j.jma.2018.04.003 ↗
15. Altered ageing behaviour of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy processed by high pressure torsion10.1016/j.actamat.2018.04.003 ↗
16. Recent developments in rare-earth free wrought magnesium alloys having high strength: a review10.1016/j.jallcom.2015.12.057 ↗
17. A new high-strength Mg-Zn-Ce-Y-Zr magnesium alloy10.1016/j.jallcom.2016.07.144 ↗
18. Microstructure, mechanical and corrosion properties of Mg-2Dy-xZn (x=0, 0.1, 0.5 and 1 at%) alloys10.1016/j.jma.2014.03.002 ↗
19. Stress corrosion cracking susceptibility of a high strength Mg-7%Gd-5%Y-1%Nd-0.5%Zr alloy10.1016/j.jma.2014.11.004 ↗
20. Influence of texture on Hall-Petch relationships in an Mg alloy10.1016/j.actamat.2014.08.023 ↗
21. Bulk nanostructured materials from severe plastic deformation10.1016/S0079-6425(99)00007-9 ↗
22. Nanocrystalline materials10.1016/0079-6425(89)90001-7 ↗
23. Courtney · 2005
24. Properties of a ZK60 magnesium alloy processed by high-pressure torsion10.1016/j.jallcom.2014.06.056 ↗
25. High strength and ductility AZ91 magnesium alloy with multi-heterogenous microstructures prepared by high-temperature ECAP and short-time aging10.1016/j.msea.2018.07.075 ↗
26. Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles10.1038/nature16445 ↗
27. Producing nanograined microstructure in Mg-Al-Zn alloy by two-step friction stir processing10.1016/j.scriptamat.2008.04.003 ↗
28. The effect of Ti addition on microstructure evolution of AZ61 Mg alloy during mechanical milling10.1016/j.jallcom.2017.02.029 ↗
29. Grain growth kinetics of bulk AZ31 magnesium alloy by hot pressing10.1016/j.jallcom.2012.03.006 ↗
30. Improved corrosion resistance of a high-strength Mg–Al–Mn–Ca magnesium alloy made by rapid solidification powder metallurgy10.1016/j.msea.2012.02.046 ↗
31. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
32. On the use of cryomilling and spark plasma sintering to achieve high strength in a magnesium alloy10.1016/j.jallcom.2016.07.162 ↗
33. Microstructure and properties of mechanically milled AZ61 powders dispersed with submicron/nanometer Ti particulates10.1016/j.matchar.2017.03.017 ↗
34. Nanocrystalline Ti/AZ61 magnesium matrix composite: evolution of microstructure and mechanical property during annealing treatment10.1016/j.jallcom.2018.01.136 ↗
35. Transitions in mechanical behavior and in deformation mechanisms enhance the strength and ductility of Mg-3Gd10.1016/j.actamat.2019.11.034 ↗
36. Enhanced strength and ductility of AZ80 Mg alloys by spray forming and ECAP10.1016/j.msea.2016.06.031 ↗
37. Mechanistic origin and prediction of enhanced ductility in magnesium alloys10.1126/science.aap8716 ↗
38. Influence of grain size and texture on Hall–Petch relationship for a magnesium alloy10.1016/j.scriptamat.2011.08.028 ↗
39. Microstructures and mechanical properties of ultrafine-grained Ti/AZ31 magnesium matrix composite prepared by powder metallurgy10.1016/j.apt.2018.09.001 ↗
40. Properties and deformation behaviour of Mg–Y2O3 nanocomposites10.1016/j.actamat.2007.05.032 ↗
41. The effect of solid solution W additions on the mechanical properties of nanocrystalline Ni10.1016/S1359-6454(02)00427-5 ↗