Thermal, microstructural and elastic modulus behavior of Ti50Ni50−xNbx (x = 0–25%at) shape memory alloys obtained by plasma arc melting
Source abstract
Abstract
Abstract Ternary alloys based on the NiTi system with the addition of Nb have attracted attention for several areas of engineering, due to improvements in the shape memory properties. In this work, six TiNiNb compositions were obtained by plasma arc melting under controlled atmosphere, with Nb contents of 5%, 10%, 15%, 20% and 25% Nb in the Ti50Ni50−xNbx system (% at). This work aims to evaluate the influence of Nb content on the microstructure, phase transformation and elastic modulus behavior of the ternary alloy compared to the equiatomic binary NiTi alloy. Differential scanning calorimetry (DSC) show that after a heat treatment of 900 °C for 1 h, all studied compositions present a single-step phase transformation during cooling and heating. Nb addition has a limited effect over phase transformation temperatures, with the onset of martensite transformation remaining practically constant. The microstructure of the alloys is constituted by B2 NiTi austenite matrix in the samples with 0% and 5% Nb, and by B19′ NiTi martensite in the samples with 10–25% Nb, all surrounded by an eutectic phase rich in Nb (β-Nb). Scanning electron microscopy (SEM) revealed microstructures with the presence of dendrites with a large amount of β-Nb that evolved in size with increasing Nb content. The Nb addition and consequent microstructure changes contributed to the decrease in the average hardness, going from 527 HV in NiTi to values between 259 and 396 HV in TiNiNb alloys. The Nb content, however, had a weaker effect over the highest modulus of elasticity, which was highest in the Ti50Ni30Nb20 alloy (66 GPa) and lowest in the Ti50Ni45Nb5 alloy (52 GPa), representing a less than 10% variation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Lagoudas · 2008
2. Otsuka · 1998
3. Duerig · 1990
4. Shape Memory Materials
5. Recent developments in the research of shape memory alloys10.1016/S0966-9795(98)00070-3 ↗
6. Non-medical applications of shape memory alloys10.1016/S0921-5093(99)00293-2 ↗
7. An overview of Nitinol medical applications10.1016/S0921-5093(99)00294-4 ↗
8. Science and technology of shape memory alloys: new developments10.1557/mrs2002.43 ↗
9. A review of shape memory alloy research, applications and opportunities10.1016/j.matdes.2013.11.084 ↗
10. Lexcellent · 2013 · 400
11. Nickel hypersensitivity and orthodontic treatment: a systematic review and meta-analysis10.1111/cod.12392 ↗
12. A new look at biomedical Ti-based shape memory alloys10.1016/j.actbio.2012.01.018 ↗
13. K.N. Melton , J.L. Proft , T.W. Duerig . Proceedings of the MRS International Meeting on Advanced Materials, Tokyo ,1989 165–70.
14. C.S. Zhang , L.C. Zhao , T.W. Duerig , C.M. Wayman . Effects of deformation on the transformation hysteresis and shape memory effect in a Ni47Ti44Nb9 alloy. 24(9), 1990 1807–1812.10.1016/0956-716X(90)90550-Z ↗
15. TiNiNb wide hysteresis shape memory alloy with low niobium content10.1016/j.msea.2003.11.044 ↗
16. Wide hysteresis NiTi (Nb) shape memory alloys with low Nb content (4.5 at%)10.1016/j.msea.2006.03.110 ↗
17. Effects of Nb content on yield strength of NiTiNb alloys in martensite state10.1016/S1000-9361(08)60155-7 ↗
18. Development of NiTiNb in-situ composite with high damping capacity and high yield strength10.1016/S1002-0071(12)60060-4 ↗
19. Modeling of niobium precipitates effect on the Ni47Ti44Nb9 shape memory alloy behavior10.1016/j.ijplas.2012.03.004 ↗
20. Effects of Nb additions on the precipitate morphology and hardening behavior of Ni-rich Ni55Ti45 alloys10.1016/j.jallcom.2017.11.308 ↗
21. Composition-dependent elastic properties in TiNi-Nb from first principle calculations10.1016/j.jallcom.2017.02.174 ↗
22. Study of the Ni41.3Ti38.7Nb20 wide transformation hysteresis shape-memory alloy10.1007/s11661-004-0224-3 ↗
23. Effect of thermal cycling on martensitic transformation characteristics of (Ni47Ti44)100−xNbx shape memory alloys10.1063/1.2192328 ↗
24. Effects of Nb addition on the microstructure of TiNi alloys10.2320/matertrans1989.33.337 ↗
25. Cast Microstructure of a Ni-Ti-Nb shape memory alloy10.1515/pm-1986-230705 ↗
26. Damping capacity and mechanical property of NiTiNb shape memory alloys
27. Thermal-induced phase transformation behavior of NiTiNb hypoeutectic, eutectic, and hypereutectic alloys10.3390/met9020214 ↗
28. Fabrication of shape memory alloys using the plasma skull push-pull process10.1016/j.jmatprotec.2008.08.025 ↗
29. Transformation behavior in NiTi–20Ta and NiTi–20Nb SMAs10.1007/s10973-018-7635-7 ↗
30. Influence of addition of Nb on phase transformation, microstructure and mechanical properties of equiatomic NiTi SMA10.1007/s11665-016-2281-3 ↗
31. Effects of Nb addition on microstructure and mechanical properties of TiNiNb alloys fabricated by elemental powder sintering10.1016/j.msea.2014.05.007 ↗
32. The study of constitutional phases in a Ni47Ti44Nb9 shape memory alloy10.1016/0254-0584(91)90051-U ↗
33. Microstructure evolution during fabrication of Ni-Ti-Nb SMA wires
34. Microstructure and mechanical properties of as-cast quasibinary NiTi–Nb eutectic alloy10.1016/j.msea.2014.12.090 ↗