journal article·2021-05

The effect of mechanochemical, microwave and hydrothermal modification of precipitated TiO2 on its physical-chemical and photocatalytic properties

Karolina Kucio, Volodymyr Sydorchuk, Svitlana Khalameida, Barbara Charmas

Publisher page

Abstract

The effects of the microwave (MWT), hydrothermal (HTT) and mechanochemical treatments (MChT) on the structure and physicochemical properties of TiO2 precipitated from titanium sulfate and chloride were investigated. The obtained materials were characterized using the N2 adsorption/desorption, XRD and XRF analysis, FTIR and UV–vis spectroscopy. Photo- and mechanocatalytic properties of the samples were also studied as regards the rhodamine B (RhB) degradation in the aqueous solution. All types of treatment cause significant changes in the porous structure of the samples. The XRD results showed the improvement of crystalline structure during MWT and HTT. As follows from the investigations, each way of modification results in the shift of the absorption edge towards higher wavelength values and promotes an increase in the photocatalytic activity in the process of rhodamine B degradation under visible irradiation. For the mechanocatalytic degradation, the antibate dependence of the rate constant of RhB degradation on the specific surface area of catalysts was established.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Advanced oxidation water treatment

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Surface science studies of the photoactivation of TiO2-new photochemical processes10.1021/cr050172k ↗
2. Titanium dioxide nanomaterials: synthesis, properties, modifications, and applications10.1021/cr0500535 ↗
3. Photoinduced reactivity of titanium dioxide10.1016/j.progsolidstchem.2004.08.001 ↗
4. A review on the visible light active titanium dioxide photocatalysts for environmental applications10.1016/j.apcatb.2012.05.036 ↗
5. Synthetic methods for titanium dioxide nanoparticles: a review
6. Heine · 1992 · Vol. A20 · 243
7. Industrial synthesis and characterization of nanophotocatalysts materials: titania10.1515/ntrev-2016-0007 ↗
8. Well-ordered large-pore mesoporous anatase TiO2 with remarkably high thermal stability and improved crystallinity: preparation, characterization, and photocatalytic performance10.1002/adfm.201002535 ↗
9. Facile strategy for controllable synthesis of stable mesoporous black TiO2 hollow spheres with efficient solar-driven photocatalytic hydrogen evolution10.1039/C6TA01928E ↗
10. Engineering surface defects on two-dimensional ultrathin mesoporous anatase TiO2 nanosheets for efficient charge separation and exceptional solar-driven photocatalytic hydrogen evolution10.1039/C9TC07032J ↗
11. Synthesis of particulate hierarchical tandem heterojunctions toward optimized photocatalytic hydrogen production10.1002/adma.201804282 ↗
12. Synthesis and stabilization of nano-sized titanium dioxide10.1070/RC2009v078n09ABEH004082 ↗
13. Synthesis of nanocrystalline TiO2 powders from aqueous TiOSO4 solutions under hydrothermal conditions10.1016/S0167-577X(02)00943-6 ↗
14. Physicochemical and technological aspects of the hydrothermal modification of complex sorbents and catalysts. Part 1. Modification of porous and crystalline structures10.1177/026361749701500305 ↗
15. Hydrothermal reactions under mechanochemical action10.1016/S0032-5910(01)00421-1 ↗
16. Hydrothermal technology for nanotechnology10.1016/j.pcrysgrow.2007.04.001 ↗
17. Comparison of surface properties of silica xero- and hydrogels hydrothermally modified using mechanochemical, microwave and classical methods10.1016/j.colsurfa.2016.05.066 ↗
18. Dyes catalytic degradation using modified tin (IV) oxide and hydroxide powders10.1177/0263617417722251 ↗
19. Mechanochemical and microwave treatment of precipitated zirconium dioxide and study of its physical-chemical, thermal and photocatalytic properties
20. Hydrothermal, microwave and mechanochemical modification of amorphous zirconium phosphate structure10.1007/s10973-016-5965-x ↗
21. V. Sydorchuk, S. Khalameida, B. Charmas, Modification of tin phosphate nanoporous structure under hydrothermal conditions, in: Proceedings of the IEEE 9th International Conference on Nanomaterials: Applications and Properties (NAP), Odesa, 2019, Ukraine. 〈https://doi.org/10.1109/NAP47236.2019.216965〉.10.1109/NAP47236.2019.216965 ↗
22. Efficient microwave hydrothermal preparation of nanocrystalline anatase TiO2 colloids10.1039/b200053a ↗
23. Inorganic gels as precursors of TiO2 photocatalysts prepared by low temperature microwave or thermal treatment10.1016/j.apcatb.2008.06.007 ↗
24. Modification of TiO2 for enhanced surface properties: finite Ostwald ripening by a microwave hydrothermal process10.1021/la052716j ↗
25. Characteristic of mechanically milled TiO2 powders10.1016/S0167-577X(01)00518-3 ↗
26. Phase transformations in nanocrystalline TiO2 milled in different milling atmospheres10.1016/j.jssc.2004.08.017 ↗
27. Study on the milling-induced transformation in TiO2 powder with different grain sizes10.1016/S0167-577X(03)00536-6 ↗
28. Mechanochemical preparation of nanocrystalline TiO2 powders and their behavior at high temperatures10.1016/j.jallcom.2005.02.004 ↗
29. Preparation by high-energy milling, characterization, and catalytic properties of nanocrystalline TiO210.1021/jp054586t ↗
30. On the origin of the decay of the photocatalytic activity of TiO2 powders ground at high energy10.1021/jp900108a ↗
31. Synthesis of TiO2 nanoparticles by a combined sol-gel ball milling method and investigation of nanoparticle size effect on their photocatalytic activities10.1016/j.powtec.2011.08.026 ↗
32. Synthesis of iron-doped TiO2 nanoparticles by ball-milling process: the influence of process parameters on the structural, optical, magnetic, and photocatalytic properties10.1007/s10853-014-8453-3 ↗
33. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (provisional)10.1351/pac198254112201 ↗
34. Catalytic degradation of safranin T in aqueous medium using non-conventional processes
35. Fourier transform infrared study of the performance of nanostructured TiO2 particles for the photocatalytic oxidation of gaseous toluene10.1006/jcat.2001.3301 ↗
36. Structural and morphological modifications of sintering microcrystalline TiO2: an XRD, HRTEM and FTIR study10.1016/0169-4332(93)90427-D ↗
37. Surface structure of TiO2 P25 nanoparticles: infrared study of hydroxy groups on coordinative defect sites10.1021/jp107671k ↗
38. The effects of plastic deformation on band gap, electronic defect states and lattice vibrations of rutile10.1016/j.jpcs.2006.10.014 ↗
39. Recent advances in the textural characterization of hierarchically structured nanoporous materials10.1039/C6CS00391E ↗
40. Ostwald ripening of confined nanoparticles: chemomechanical coupling in nanopores10.1039/C9NR01349K ↗
41. Substructure of titanium dioxide agglomerates from dry ball-milling experiments10.1023/A:1010097429732 ↗
42. Preparation of nano-dispersed lithium niobate by mechanochemical route10.1007/s10973-013-3343-5 ↗
43. Synthesis, characterization, photocatalytic evaluation, and toxicity studies of TiO2-Fe3+ nanocatalyst10.1007/s10853-014-8234-z ↗
44. Recyclable UV and visible light photocatalytically active amorphous TiO2 doped with M (III) ions (M=Cr and Fe)10.1016/j.matchemphys.2010.11.044 ↗
45. Using dyes for evaluating photocatalytic properties: a critical review10.3390/molecules20010088 ↗
46. Visible-light-induced photodegradation of rhodamine B over hierarchical TiO2: effects of storage period and water-mediated adsorption switch10.1021/ie3019033 ↗
47. One-pot synthesis of bifunctionalized TiO2 mesoporous photocatalyst with visible light response10.1007/s10934-014-9898-0 ↗
48. Synthesis of Fe3+ doped TiO2 photocatalysts for the visible assisted degradation of an azo dye10.1016/j.colsurfa.2010.12.022 ↗
49. Defective TiO2 with oxygen vacancies: synthesis, properties and photocatalytic applications10.1039/c3nr00476g ↗
50. Role of support on the photocatalytic activity of titanium oxide10.1016/j.apcata.2010.10.016 ↗
51. Mechanochemical synthesis of nanophotocatalysts SiO2/TiO2/Fe2O3: their structural, thermal and photocatalytic properties10.1007/s13204-020-01462-3 ↗
52. Transition metal oxides supported onto silica gel as visible light-driven photocatalysts10.1007/s11164-020-04187-8 ↗
53. Effect of inert supports for titanium dioxide loading on enhancement of photodecomposition rate of gaseous propionaldehyde10.1021/j100024a047 ↗
54. Degradation of phenol by mechanical activation of a rutile catalyst10.1016/j.jcis.2009.07.016 ↗
55. Mechanochemistry: a review of surface reactions and environmental applications10.1016/j.clay.2011.11.018 ↗
56. Synthesis and modification of Ce-Zr oxide compositions as photocatalysts10.1016/j.apcata.2020.117767 ↗
57. Fine grinding and states of equilibrium10.1016/0032-5910(84)85027-5 ↗
58. Heinicke · 1985
59. Hallmarks of mechanochemistry: from nanoparticles to technology10.1039/c3cs35468g ↗