A one-step dynamic hydrothermal method for the synthesis of orthorhombic LiMnO2/CNTs nanocomposites networks for Li-ion batteries
Source abstract
Abstract
Abstract Orthorhombic LiMnO2 (o-LiMnO2) is considered as a potential cathode material for lithium ion batteries due to its high theoretical capacity and low cost. However, the irreversible phase transformation to spinel LiMn2O4 and sluggish lithium ion diffusion kinetics result in low practical specific capacity and poor cycling stability. In this work, conductive o-LiMnO2/carbon nanotubes (CNTs) composites frameworks were constructed via an ingenious one-step dynamic hydrothermal method. The obtained o-LiMnO2/CNTs composites achieved outstanding electrochemical performance upon adjustment of the CNTs content. The results demonstrated either physical introduction of 1 wt% CNTs into o-LiMnO2 or in-situ formed o-LiMnO2/CNTs composite with 0.5 wt% CNTs could improve electrochemical performance effectively compared with pristine o-LiMnO2. However, when the content of CNTs increased to 1 wt% in in-situ formed o-LiMnO2/CNTs, the specific capacity reached 194.4 mAh g−1 and retention rate was 93.7% after 50 cycles at 0.1C. Moreover, the in-situ formed composite with 5 wt% CNTs led to the optimum specific capacity of 204.9 mAh g−1 and a high capacity retention rate (97.7% after 50 cycles at 0.1C). Galvanostatic intermittent titration technique (GITT) measurement also demonstrated that 5 wt% CNTs in o-LiMnO2/CNTs composite drastically improved the slowest Li+ diffusion step by a factor 100 times after 30 cycles as compared to the pristine counterpart. This behaviour demonstrated an accelerated diffusion of lithium through this new approach and improved reversibility of charging-discharging.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Synthesis of tetrahedral LiFeO2 and its behavior as a cathode in rechargeable lithium batteries10.1021/ja077651g ↗
2. Energetics of lithium insertion into magnetite, defective magnetite, and maghemite10.1021/acs.chemmater.8b03544 ↗
3. Characterization of potassium doped Li2ZrO3 based CO2 sorbents: stability properties and CO2 desorption kinetics10.1016/j.cej.2017.10.177 ↗
4. Recent advances in lithium containing ceramic based sorbents for high-temperature CO2 capture10.1039/C8TA08932A ↗
5. Synthesis and characterization of magnetic LiFe5O8-LiFeO2 as a solid basic catalyst for biodiesel production10.1016/j.catcom.2017.12.002 ↗
6. Evaluating the optimum operating parameters of biodiesel production process from soybean oil using the Li2TiO3 catalyst10.1016/j.jtice.2016.11.001 ↗
7. The lithium-ion battery: state of the art and future perspectives10.1016/j.rser.2018.03.002 ↗
8. Practical challenges and future perspectives of all-solid-state lithium-metal batteries
9. Lithium-ion battery based renewable energy solution for off-grid electricity: a techno-economic analysis10.1016/j.rser.2017.01.049 ↗
10. Metastable and nanosize cation-disordered rocksalt-type oxides: revisit of stoichiometric LiMnO2 and NaMnO210.1039/C8TA03667E ↗
11. Optimization of insertion compounds such as LiMn2O4 for Li-ion batteries10.1149/1.1516778 ↗
12. Synthesis of layered LiMnO2 as an electrode for rechargeable lithium batteries10.1038/381499a0 ↗
13. Defect physics, delithiation mechanism, and electronic and ionic conduction in layered lithium manganese oxide cathode materials10.1103/PhysRevApplied.3.024013 ↗
14. Facile synthesis of orthorhombic LiMnO2 nanorods by in-situ carbothermal reduction: promising cathode material for Li ion batteries10.1016/j.ceramint.2017.04.158 ↗
15. Electrochemical properties of monoclinic and orthorhombic LiMnO2 synthesized by a one-step hydrothermal method10.1016/j.jallcom.2017.11.384 ↗
16. One-step hydrothermal routine for pure-phased orthorhombic LiMnO2 for Li ion battery application10.1016/j.electacta.2008.04.008 ↗
17. Efficient microwave hydrothermal synthesis of nanocrystalline orthorhombic LiMnO2 cathodes for lithium batteries10.1016/j.electacta.2010.01.010 ↗
18. EDTA-2Na assisted dynamic hydrothermal synthesis of orthorhombic LiMnO2 for lithium ion battery10.1016/j.jallcom.2020.154599 ↗
19. Stabilization of spinel-like phase transformation ofo-LiMnO2 during 55 °C cycling by Sol−Gel coating of CoO10.1021/cm0101935 ↗
20. In situ x-ray study of LiMnO210.1149/1.1838698 ↗
21. Core-shell structured o-LiMnO2@Li2CO3 nanosheet array cathode for high-performance, wide-temperature-tolerance lithium-ion batteries10.1021/acsami.6b04616 ↗
22. Layered LixMn1-yCoyO2 intercalation electrodes-influence of ion exchange on capacity and structure upon cycling10.1021/cm000965h ↗
23. Enhanced structural stability of o-LiMnO2 by sol-gel coating of Al2O310.1021/cm000759+ ↗
24. Preparation and characterization of Cr-doped LiMnO2 cathode materials by Pechini’s method for lithium ion batteries10.1016/j.matchemphys.2013.01.030 ↗
25. Surface double phase network modified lithium rich layered oxides with improved rate capability for Li-ion batteries10.1021/am506354e ↗
26. High rate LiMn2O4/carbon nanotube composite prepared by a two-step hydrothermal process10.1016/j.jpowsour.2014.06.085 ↗
27. Size-controlled hydrothermal synthesis and electrochemical behavior of orthorhombic LiMnO2 nanorods10.1016/j.jpcs.2008.03.001 ↗
28. Enhanced structural stability of boron-doped layered@spinel@carbon heterostructured lithium-rich manganese-based cathode materials10.1021/acssuschemeng.0c00870 ↗
29. Carbon nanotubes for lithium ion batteries10.1039/b904116h ↗
30. Carbon nanotube (CNT)-based composites as electrode material for rechargeable Li-ion batteries: a review10.1016/j.compscitech.2011.11.019 ↗
31. Structural and electrochemical characteristics of o-LiMnO2-MWCNTs nanocomposites10.1016/j.physb.2019.411695 ↗
32. Orthorhombic LiMnO2 nanorods as cathode materials for lithium-ion batteries: synthesis and electrochemical properties10.1016/j.ceramint.2016.01.207 ↗
33. Influence of Al3+ ions on the morphology and structure of layered LiMn1–xAlxO2 cathode materials for the lithium ion battery10.1016/j.jallcom.2013.03.187 ↗
34. FTIR spectroscopy for carbon family study10.1080/10408347.2016.1157013 ↗
35. Synthesis of metal-organic framework hybrid nanocomposites based on GO and CNT with high adsorption capacity for dye removal10.1016/j.cej.2017.06.054 ↗
36. PtRu/carbon nanotube nanocomposite synthesized in supercritical fluid: a novel electrocatalyst for direct methanol fuel cells10.1021/la051272o ↗
37. Improved high rate capacity and lithium diffusion ability of LiNi1/3Co1/3Mn1/3O2with ordered crystal structure10.1149/2.010205jes ↗
38. Mercury, Hydrothermal synthesis of o-LiMnO2 employing Mn mining residues from Amazon (Brazil) as starting material
39. A new type of manganese oxide (MnO2·0.5H2O) derived from Li1.6Mn1.6O4 and its lithium ion-sieve properties10.1021/cm0000191 ↗
40. Raman spectra study of orthorhombic LiMnO210.1016/j.ssi.2010.08.005 ↗
41. Lattice vibrations of materials for lithium rechargeable batteries III. Lithium manganese oxides10.1016/S0921-5107(03)00077-1 ↗
42. Perspectives on carbon nanotubes and graphene Raman spectroscopy10.1021/nl904286r ↗
43. Probing the intrinsic properties of exfoliated graphene:Raman spectroscopy of free-standing monolayers10.1021/nl8031444 ↗
44. Preparation and electrochemical properties of indium- and sulfur-doped LiMnO2 with orthorhombic structure as cathode materials10.1016/j.jpowsour.2008.07.069 ↗
45. Role of hydrothermal parameters on phase purity of orthorhombic LiMnO2 for use as cathode in Li ion battery10.1016/j.ceramint.2015.01.116 ↗
46. Electrochemical behavior of orthorhombic LiMnO2: influence of the grain size and cationic disorder10.1016/0167-2738(95)00245-6 ↗
47. Manganese oxides for lithium batteries10.1016/S0079-6786(97)81003-5 ↗
48. Properties, crystal structure, and performance of o-LiMnO2 as cathode material for Li secondary batteries10.1149/1.2142293 ↗
49. Electrochemical cycling-induced spinel formation in high-charge-capacity orthorhombic LiMnO210.1149/1.1392457 ↗
50. Lithium transport through a sol-gel derived LiMn2O4 film electrode: analyses of potentiostatic current transient and linear sweep voltammogram by Monte Carlo simulation10.1016/S0013-4686(02)00173-1 ↗
51. Formation of the spinel phase in the layered composite cathode used in Li-ion batteries10.1021/nn305065u ↗
52. Facile hydrothermal synthesis and electrochemical properties of orthorhombic LiMnO2 cathode materials for rechargeable lithium batteries10.1039/C3RA47932C ↗
53. Effects of microwave-hydrothermal conditions on the purity and electrochemical performance of orthorhombic LiMnO210.1021/sc400439k ↗
54. Dynamics of a blended lithium-ion battery electrode during galvanostatic intermittent titration technique10.1016/j.electacta.2016.11.169 ↗
55. Revealing the correlation between structural evolution and Li+ diffusion kinetics of nickel-rich cathode materials in Li-ion batteries10.1039/D0TA00555J ↗
56. High performance Na3V2(PO4)3 cathode prepared by a facile solution evaporation method for sodium-ion batteries10.1016/j.ceramint.2016.12.149 ↗
57. Operando X-ray diffraction analysis of the degradation mechanisms of a spinel LiMn2O4 cathode in different voltage windows10.1016/j.jechem.2019.09.011 ↗
58. Electrochemistry of manganese dioxide in lithium nonaqueous cell: iii . X-ray diffractional study on the reduction of spinel-related manganese dioxide10.1149/1.2086552 ↗
59. Hierarchical Li-rich oxide microspheres assembled from {010} exposed primary grains for high-rate lithium-ion batteries10.1039/D0NJ00274G ↗
60. Solid-state electrochemical kinetics of li-ion intercalation into Li1-xCoO2: simultaneous application of electroanalytical techniques SSCV, PITT, and EIS10.1149/1.1391759 ↗
61. In situ synchrotron diffraction study of high temperature prepared orthorhombic LiMnO210.1016/j.ssi.2006.11.018 ↗
62. Microstructure and electrochemical characterization of spherical-like orthorhombic LiMnO2 via co-precipitation10.1016/j.jallcom.2007.06.121 ↗
63. Synthesis of mesoporous orthorhombic LiMnO2 cathode materials via a one-step flux method for high performance lithium-ion batteries10.1088/2053-1591/aac9a2 ↗
64. Synthesis of Li-Mn-O mesocrystals with controlled crystal phases through topotactic transformation of MnCO310.1039/c3nr33767g ↗