journal article·2021-01

Boosting anode performance of mesoporous Si by embedding copper nano-particles

Yao Zhang, Zhixiang Liu, Chaoye Zhu, Xinli Guo, Wanqiang Liu, Yi Qu

Publisher page

Abstract

Abstract Si anode of lithium-ion battery with high lithium storage capacity has been widely studied. However, its large volume expansion (∼300%) and low conductivity lead to poor cycle stability. In this work, embedding Cu nano-particles into the mesoporous Si (denoted as Cu@MP-Si) provides a new strategy to improve both cycle stability and rate capability, which were fulfilled via handlings of magnesiothermic reduction, impregnation and hydrogenation reduction. The prepared Cu@MP-Si sample delivers a charge-discharge capacity of 1559 mA h g−1 after 100 cycles, at the same time offers greatly enhanced rate capability from that of MP-Si. SEM-EDS and TEM observations on the sample after 100 cycles identified the still perfectly dispersed Cu nano-particles. The roles played by Cu can be summarized as two aspects: on one hand, the highly dispersed Cu nano-particles in the pores support the architecture of MP-Si effectively, ensure that Si is not easily fractured. Copper with strong ductility also relieves the stress caused by volume expansion of Si, effectively increasing the cycle life of anode. On the other hand, those highly dispersed Cu nano-particles lay a favorable pathway for mass transportation in the MP-Si so that the lithium diffusion coefficient and charge transfer rate can be significantly improved. It also improves the rate performance of Si-based anode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Beyond intercalation-based Li-ion batteries: the state of the art and challenges of electrode materials reacting through conversion reactions10.1002/adma.201000717 ↗
2. Materials challenges and opportunities of lithium-ion batteries for electrical energy storage10.1021/jz1015422 ↗
3. High crystalline carbon network of Si/C nanofibers obtained from the embedded pitch and its contribution to Li ion kinetics10.1016/j.electacta.2016.10.111 ↗
4. A facile synthesis of Fe3O4/C composite with high cycle stability as anode material for lithium-ion batteries10.1016/j.jpowsour.2013.03.073 ↗
5. Synthesis of foam-like freestanding Co3O4 nanosheets with enhanced electrochemical activities10.1039/c0cc05383j ↗
6. Highly ordered mesoporous NiO anode material for lithium ion batteries with an excellent electrochemical performance10.1039/c0jm03132a ↗
7. Preparation and electrochemical performance of polycrystalline and single crystalline CuO nano rods as anode materials for Li ion battery10.1021/jp037075k ↗
8. Li-alloy based anode materials for Li secondary batteries10.1039/b919877f ↗
9. Nanostructured silicon for high capacity lithium battery anodes10.1039/C0EE00281J ↗
10. Silicon-based nanomaterials for lithium-ion batteries: a review10.1002/aenm.201300882 ↗
11. Silicon nanotube battery anodes10.1021/nl902058c ↗
12. Nano and bulk-silicon-based insertion anodes for lithium-ion secondary cells10.1016/j.jpowsour.2006.09.084 ↗
13. Designing nanostructured Si anodes for high energy lithium ion batteries10.1016/j.nantod.2012.08.004 ↗
14. Closing to scaling-up high reversible Si/rGO nanocomposite anodes for lithium ion batteries10.1016/j.electacta.2016.09.048 ↗
15. Improved electrochemical performance of nanostructured Si-based films modified by chemical etching10.1016/j.electacta.2012.04.052 ↗
16. High performance lithium battery anodes using silicon nanowires10.1038/nnano.2007.411 ↗
17. A stable silicon/graphene composite using solvent exchange method as anode material for lithium ion batteries10.1016/j.carbon.2013.06.095 ↗
18. Silicon nanoparticles-graphene paper composites for Li ion battery anodes10.1039/b919738a ↗
19. Facile synthesis of silicon nanoparticles inserted into graphene sheets as improved anode materials for lithium-ion batteries10.1039/c2cc17061b ↗
20. Porous Si anode materials for lithium rechargeable batteries10.1039/b923002e ↗
21. Improving the cycling stability of silicon nanowire anodes with conducting polymer coatings10.1039/c2ee21437g ↗
22. Carbon-silicon core-shell nanowires as high capacity electrode for lithium ion batteries10.1021/nl901670t ↗
23. Preparation of nano crystalline silicon from SiCl4 at 200°C in molten salt for high-performance anodes for lithium ion batteries10.1002/anie.201411830 ↗
24. A yolk-shell design for stabilized and scalable Li-ion battery alloy anodes10.1021/nl3014814 ↗
25. Chemical reduction of three-dimensional silica micro assemblies into microporous silicon replicas10.1038/nature05570 ↗
26. Highly ordered mesoporous Si/C nanocomposite as high performance anode material for Li-ion batteries10.1016/j.electacta.2016.03.085 ↗
27. Hollow silicon nanospheres encapsulated with a thin carbon shell: an electrochemical study10.1016/j.electacta.2016.08.059 ↗
28. A novel strategy to suppress capacity and voltage fading of Li-and Mn-rich layered oxide cathode material for lithium-ion batteries10.1002/aenm.201601066 ↗
29. Effects of carbon coating and iron phosphides on the electrochemical properties of LiFePO4/C10.1016/j.jpowsour.2008.03.026 ↗
30. Novel three-dimensional mesoporous silicon for high power lithium-ion battery anode material10.1002/aenm.201100485 ↗
31. Morphological and structural evolution of Si-Cu nanocomposites by an instantaneous vapor-liquid-solid growth and the electrochemical lithiation/delithiation performances10.1007/s10008-018-04173-6 ↗
32. Si, Stabilizing Si/graphite composites with Cu and in situ synthesized carbon nanotubes for high performance Li-ion battery anodes10.1039/C8QI00173A ↗
33. Usui · 2012 · 78 · 3649
34. Copper-nanoparticle-induced porous Si/Cu composite films as an anode for lithium ion batteries10.1021/acsnano.7b02030 ↗
35. Cu nanowire wrapped and Cu3Si anchored Si@Cu quasi core-shell composite microsized particles as anode materials for Li-ion batteries10.1016/j.jallcom.2019.151750 ↗
36. Influence of copper addition for silicon–carbon composite as anode materials for lithium ion batteries10.1039/C6RA12332E ↗
37. Strategy to form homogeneously macroporous Si as enhanced anode material of Li-ion batteries10.1016/j.jallcom.2017.09.263 ↗
38. Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300 angstrom pores10.1126/science.279.5350.548 ↗
39. Application of large pore MCM-41 molecular sieves to improve pore size analysis using nitrogen adsorption measurements10.1021/la970776m ↗
40. Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries10.1039/c0ee00699h ↗
41. Electrospun carbon nanofiber anodes containing monodispersed Si nanoparticles and graphene oxide with exceptional high rate capacities10.1016/j.nanoen.2014.03.003 ↗
42. Graphene oxide involved air-controlled electrospray for uniform, Fast,Instantly dry, and binder-free electrode fabrication10.1021/acsami.7b00087 ↗
43. Preparation of Si/Sn-based nanoparticles composited with carbon fibers and improved electrochemical performance as anode materials10.1021/sc500290x ↗
44. A simplified rietveld code for quantitative phase analysis: development, test and application to uranium mineral So
45. Electronic origin for the phase transition from amorphous LixSi to crystalline Li15Si410.1021/nn402349j ↗