“Effect of milling and adding yttrium on sorption characteristics of Zr-Co based nanostructure chemical getter”
Source abstract
Abstract
Abstract Due to recent technological development, requirements, and advances in Hi-Tech systems, the demands for a high vacuum atmosphere and its long-term preservation are important challenges. Chemical getters are appropriate candidates for this goal. In this research, the effect of milling and adding yttrium on getter performance in a Zr-Co based compound was studied. In this research, powder composition with 75%wt Zr and 25%wt Co as a control sample and powder composition with 75%wt Zr, 22% wt Co and 3% wt Y were milled in a high energy planetary ball mill for different times. To activate the getters, they were subjected to heat treatment. According to the vacuum preserving time in different samples, the optimum condition for heat treatment was heating at 360 °C for 80 min. The results showed that the addition of yttrium to the Zr-Co based getter reduced the activation temperature of 70 °C. The vacuum preserving time was evaluated in the range of 0.001–0.1 mmHg. In no getter case, this time was 345 s, and for unmilled and milled Zr75Co25 were 2080 and 3140 s, respectively; and for Zr75Co22Y3 this time was 4955 s. These values highlight the importance of using getter in vacuum systems, emphasize the impact of milling to achieve fine microstructure, as well as the paramount effect of yttrium as a catalyst.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Nuclear Materials and Properties · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Mechanism of non-evaporable getter activation XPS and static SIMS study of Zr44V56 alloy
2. Benvenuti · 2001 · 302
3. Non evaporable getter (NEG) technology: a powerful tool for UHV-XHV systems
4. Getter free vacuum packaging for MEMS10.1016/j.sna.2008.10.014 ↗
5. Molecular Surface Pumping: the Getter Pump. Vacuum Technology
6. Chemical pumping in vacuum technology10.1016/0042-207X(95)00252-9 ↗
7. Activation of binary Zr–V non-evaporable getters: synchrotron radiation photoemission study10.1016/j.apsusc.2004.09.049 ↗
8. Kinetics of hydrogen uptake for getter materials10.1016/j.vacuum.2003.12.155 ↗
9. Coda A., Corazza A., Toia l., Bovisio M., Baronio P., Non-evaporable Getter Alloys Based on Yttrium for Hydrogen Sorption., patent number: US7,858,024 B2, 2010.
10. Roles of texture in controlling oxidation, hydrogen ingress and hydride formation in Zr alloys10.1016/j.jnucmat.2012.05.005 ↗
11. Diffusion of oxygen in growing zirconia films10.1016/0022-3115(68)90058-5 ↗
12. Study the effect of praseodymium and neodymium on adsorption properties for active gases in non-evaporable Zr-Co base chemical getter and comparing with yttrium
13. The role of alloying elements in the initiation of nanoscale porosity in oxide films formed on zirconium alloys10.1016/j.corsci.2013.08.006 ↗
14. Oxidation and hydrogen uptake in zirconium, Zircaloy-2 and Zircaloy-4: computational thermodynamics and ab initio calculations10.1016/j.jnucmat.2013.09.038 ↗
15. Fabrication and characterization of non-evaporable porous getter films
16. Diffusion in solid metals and alloys
17. Nitrogen sorption tests, SEM-windowless EDS and XRD analysis of mechanically alloyed nanocrystalline getter materials10.1016/S0965-9773(99)00372-4 ↗
18. Adsorption, dissociation and diffusion of hydrogen on the ZrCo surface and subsurface: a comprehensive study using first principles approach10.1016/j.apsusc.2017.06.012 ↗
19. The microstructure and microtexture of zirconium oxide films studied by transmission electron backscatter diffraction and automated crystal orientation mapping with transmission electron microscopy10.1016/j.actamat.2014.07.062 ↗
20. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
21. Preparation and characterization of non-evaporable porous Ti–Zr–V getter films10.1016/j.surfcoat.2006.08.018 ↗
22. Benvenuti · 1995
23. Removal of simple hydrocarbons from a rare gas by a 70%Zr,25%V,%Fe getter10.1016/0950-4214(89)85001-7 ↗
24. Vacuum properties of TiZrV non-evaporable getter films10.1016/S0042-207X(00)00246-3 ↗
25. Hydrogenation thermokinetics and activation behavior of non-stoichiometric Zr-based Laves alloys with enhanced hydrogen storage capacity10.1016/j.jallcom.2016.10.021 ↗
26. Hydrogen absorption behavior of Zr-based getter materials with Pd-Ag coating against gaseous impurities10.1016/j.ijhydene.2016.06.073 ↗
27. Microstructure and hydrogenation properties of a melt-spun non-stoichiometric Zr-based Laves phase alloy10.1016/j.matchar.2015.11.011 ↗
28. Development of zirconium–cobalt beds for recovery, storage and supply of tritium10.1016/0920-3796(89)90077-X ↗
29. Evaluation of ZrCo and other getters for Tritium handling and storage10.1016/0022-3115(90)90292-U ↗
30. Synthesis and physical properties of Cr–P-based intermetallic compounds: Cr3P, Cr3PC, and Cr3PN10.1016/j.jallcom.2015.01.051 ↗
31. High temperature enthalpy increments and thermodynamic functions of ZrCo: an experimental and theoretical study10.1016/j.tca.2015.05.024 ↗
32. Influence of deposition pressure, substrate temperature and substrate outgassing on sorption properties of Zr-Co-Ce getter films10.1016/j.jallcom.2015.11.208 ↗
33. Variants of Zr3Co and their superconducting critical temperatures10.1016/0025-5408(78)90184-8 ↗
34. Development of a nanostructured Zr3Co intermetallic getter powder with enhanced pumping characteristics10.1016/j.intermet.2014.10.003 ↗
35. Effect of rare earth elements on sorption characteristics of nanostructured Zr-Co sintered porous getters10.1016/j.vacuum.2014.09.008 ↗
36. Activation of Zr–Co–rare earth getter films: an XPS study10.1016/j.apsusc.2010.04.006 ↗
37. Influence of mechanical milling on structure, particle size, morphology and magnetic properties of rare earth free permanent magnetic Zr2Co11 alloy10.1016/j.jallcom.2015.11.186 ↗
38. Thermal desorption behaviors of helium in Zr-Co films prepared by sputtering deposition method10.1016/j.vacuum.2016.05.018 ↗
39. ZrCoCe getter film solution for under controlled atmosphere MEMS packaging
40. Preparation and sorption characteristics of Zr–Co–RE getter films10.1016/j.jallcom.2012.01.030 ↗
41. Analysis of vacuum evolution inside solar receiver tubes10.1016/j.egypro.2015.03.033 ↗
42. Mossa R.W., Henshall P., Aryac F., Shire G.S.F., Hydec T., Eamesd P.C., Performance and operational effectiveness of evacuated flat plate solar collectors compared with conventional thermal, PVT and PV panels. Appl. Energy. 216: p. 588-601.10.1016/j.apenergy.2018.01.001 ↗
43. H2 absorption in amorphous and nanostructured Zr-based alloys under milling10.1016/j.msea.2003.10.134 ↗
44. Nitrogen sorption tests, SEM-windowless EDS and XRD analysis of mechanically alloyed nanocrystalline getter materials10.1016/S0965-9773(99)00372-4 ↗
45. Structural and desorption characterisations of milled (MgH2+ Y, Ce) powder mixtures for hydrogen storage10.1016/j.ijhydene.2006.11.035 ↗
46. Cotton Simon · 2006
47. Origin and effect of lateral cracks in oxide scales formed on zirconium alloys10.1016/j.jnucmat.2012.06.039 ↗
48. Enhanced oxygen diffusivity in interfaces of nanocrystalline ZrO2Y2O310.1073/pnas.0730783100 ↗
49. The stability of alloying additions in Zirconium10.1016/j.jnucmat.2013.01.335 ↗
50. Prodromides · 2002 · 1
51. Dean · 1979 · 11
52. SAES. SAES Getter, Technical report, "DF TABLETS".
53. Hydrogen-induced changes in crystal structure and magnetic properties of the Zr3MOx (M = Fe, Co) phases10.1016/j.jallcom.2004.05.064 ↗
54. Absorption and desorption kinetics of hydrogen storage alloys10.1016/0925-8388(96)02217-7 ↗
55. Gregg · 1982
56. Intrinsic linear scaling of hydrogen storage capacity of carbon nanotubes with the specific surface area10.1016/j.cattod.2006.09.026 ↗
57. Physical characteristics and sintering behavior of ultrafine zirconia-ceria powders10.1016/S0955-2219(01)00475-7 ↗
58. Comparison of parameters calculated from the BET and Freundlich isotherms obtained by nitrogen adsorption on activated carbons: a new method for calculating the specific surface area10.1016/j.micromeso.2007.08.032 ↗