journal article·2019-09

Newly developed polytetrafluoroethylene composites based on F8261-modified Li2Mg2.88Ca0.12TiO6 powder

Fuchuan Luo, Shuren Zhang, Bin Tang, Ying Yuan, Zixuan Fang

Publisher page

Abstract

Abstract Li2Mg2.88Ca0.12TiO6 (LMCT) was modified by silane coupling agent (C14H19F13O3Si, F8261), and then filled in polytetrafluoroethylene suspension (PTFE) using hot treating approach. The weight fraction of LMCT varied from 30 to 70 wt %. XRD patterns presented the crystal phase of LMCT powders. The analyses of TEM, XPS, and FTIR were performed to characterize the surface states of LMCT fillers. The effects of LMCT filling content on the microstructure and dielectric properties were also investigated. Several theoretical models were discussed and compared with the dielectric constant of LMCT/PTFE substrates with respect to different LMCT content. Furthermore, the temperature and frequency dependence of dielectric constant were also considered on the composites. At last, the LMCT/PTFE composite substrates possessed relatively high dielectric constant (er = 4.33) and extremely low dielectric loss (tan δ = 0.001) at filler loading of 50 wt % LMCT.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric materials and actuators · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Recent progress in applications of the cold sintering process for ceramic–polymer composites10.1002/adfm.201801724 ↗
2. The dimensional effect of MgTiO3 ceramic filler on the microwave dielectric properties of PTFE/MgTiO3 composite with ultra-low dielectric loss
3. Preparation and properties of silica filled PTFE flexible laminates for microwave circuit applications10.1016/j.compositesa.2009.05.007 ↗
4. Visible light-induced controlled radical polymerization of methacrylates with perfluoroalkyl iodide as the initiator in conjugation with a photoredox catalyst fac-[Ir(ppy)]310.1002/pola.27390 ↗
5. Anisotropic mechanical properties and constitutive relations of PTFE coated glass fibers10.1016/j.compstruct.2017.07.076 ↗
6. Effect of motion parameters on the tribological behaviour of ptfe-based composite10.1016/0263-8223(93)90165-M ↗
7. Novel high dielectric constant and low loss PTFE/CNT composites10.1016/j.ceramint.2018.06.077 ↗
8. TiO2 and SiO2 filled PTFE composites for microwave substrate applications10.1007/s10965-014-0366-y ↗
9. Rutile filled PTFE composites for flexible microwave substrate applications10.1016/j.mseb.2009.04.011 ↗
10. Preparation and properties of silica filled PTFE flexible laminates for microwave circuit applications10.1016/j.compositesa.2009.05.007 ↗
11. Effects of surface fluoride-functionalizing of glass fiber on the properties of PTFE/glass fiber microwave composites10.1039/C7RA02715J ↗
12. Influence of Sn-substitution on microstructure and microwave dielectric properties of Na1/2Nd1/2TiO3 ceramics10.1007/s10854-014-2416-y ↗
13. Influence of CeO2 on microstructure and microwave dielectric properties of Na1/2Sm1/2TiO3 ceramics10.1007/s10854-015-3973-4 ↗
14. Effects of Zr-substitution on microwave dielectric properties of Na0.5Nd0.2Sm0.3Ti1−xZr x O3 ceramics (x = 0.00 ∼ 0.30)10.1007/s11664-016-4736-6 ↗
15. Temperature stable and high-Q microwave dielectric ceramics in the Li2Mg3−xCaxTiO6 system (x=0.00–0.18)10.1016/j.ceramint.2016.08.055 ↗
16. Effects of CaTiO3 loading on the properties of PTFE/TiO2 composites
17. Mechanical, thermal and microwave dielectric properties of Mg2SiO4 filled Polyteterafluoroethylene composites10.1016/j.ceramint.2016.01.162 ↗
18. Improved thermal conductivity and dielectric properties of hBN/PTFE composites via surface treatment by silane coupling agent10.1016/j.compositesb.2016.11.050 ↗
19. High dielectric constant and low dielectric loss hybrid nanocomposites fabricated with ferroelectric polymer matrix and BaTiO3 nanofibers modified with perfluoroalkylsilane10.1016/j.apsusc.2014.03.131 ↗
20. Electrical and thermophysical properties of epoxy/aluminum nitride nanocomposites: effects of nanoparticle surface modification10.1016/j.compositesa.2010.05.002 ↗
21. Influence of silane coupling agent on morphology and dielectric property in BaTiO3/polyvinylidene fluoride composites10.1063/1.2338529 ↗
22. Mechanical, thermal and electrical properties of aluminum nitride/polyetherimide composites10.1016/j.compositesa.2011.06.009 ↗
23. Effect of coupling agent on the thermal and dielectric properties of PTFE/Sm2Si2O7 composites10.1016/j.compositesa.2010.04.013 ↗
24. Dielectric constant and loss tangent measurement using a stripline fixture10.1109/96.730430 ↗
25. Effect of silane as coupling agent on the dielectric properties of BaTiO3-epoxy composites10.1016/j.compositesa.2007.04.003 ↗
26. Influence of interphase and moisture on the dielectric spectroscopy of epoxy/silica composites10.1016/j.polymer.2005.01.041 ↗
27. Comparison of split post dielectric resonator and ferrite disc resonator techniques for microwave permittivity measurements of polycrystalline yttrium iron garnet10.1088/0957-0233/10/11/305 ↗
28. Effective permittivity of dielectric mixtures10.1109/36.3045 ↗
29. Polymer composites with the dielectric constant comparable to that of barium titanate ceramics10.1016/j.mseb.2007.01.035 ↗